021 879 4842
support@flyingrobot.co.za
The Holybro Kakute H7 v1 Flight Controller is full of features including integrated Bluetooth, dual plug-and-play 4in1 ESC ports, HD camera plug...
View full detailsThe Pixhawk® 6X is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6X Open Standard and the ...
View full detailsThe Pixhawk® 6C Mini is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and C...
View full detailsThe Pixhawk® 6C is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connec...
View full detailsThe Flycolor Raptor TR20 Mini Stack features an F722 Flight Controller, equipped with dual VTX and dual LED pads, offering a convenient selecti...
View full detailsT-Motor's F7 Pro Flight Controller has arrived! Enjoy full function in a wireless state! Great for cinematic professional use. This FC features 8 U...
View full detailsSPECIFICATION MCU: STM32F411 GYRO:BMI270 VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8G...
View full detailsBased on the F405 2-4S 20A Brushless Flight Controller V4, the F405 4S 20A Toothpick Brushless Flight Controller V5 applies a new ICM42688 gyro and...
View full detailsSpecifications MCU: 168MHz STM32F405RGT6 IMU: ICM42688-P (SPI) Baro: SPL06-001 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD slot (SPI) 6x UARTs, 1x...
View full detailsF4 Flight Controller FC voltage: 3.3V/5V/12V MCU: STM32F405 Gyro: MPU-6000 SPI Support PPM, SBUS, SPEKTRUM1024/2408 receivers Support max 32G TF...
View full detailsThe Pix32 v6 is the latest update to the pix32 v5 flight controllers. It is a variant of the Pixhawk 6C. It is comprised of a separate flight contr...
View full detailsThe Pix32 v6 is the latest update to the pix32 v5 flight controllers. It is a variant of the Pixhawk 6C. It is comprised of a separate flight contr...
View full details
PRODUCT DESCRIPTION FC // BLITZ Mini F7 V1.1 Flight Controller Top Features:- DJI HD VTX CONNECTOR (PLUG-AND-PLAY / NO SOLDERING REQUIRED)- 2022...
View full detailsFC Specifications MCU: STM32F405RGT6, 168MHz , 1MB Flash IMU: ICM42688-P Baro: SPL06-001 OSD: AT7456E Blackbox: 16M Flash 5x UARTs, 1x Softserial...
View full details
Perfect for wings and planes, the Matek F405 HDTE FC will work with whatever firmware you would like. Betaflight, INAV, and Ardupilot are all comp...
View full detailsShell for Tandem X20S in Black
The new features of F405-mini TE compared with F722-mini SE(EOL) F405 has 1MB flash which can run with ArduPilot. even with INAV firmware, some ...
View full detailsProduct Description About Cube Orange+ An integrated and single board/box all-in-one flight controller Provide sufficient interfaces...
View full detailsThe Matek H743-SLIM Flight Controller features STM32H743VI, ICM20602 & MPU6000, DPS310, OSD, 7x UARTs, 2x I2C, 1xCAN, 13x PWM outputs, BEC5V an...
View full detailsMatek's H743-WING V3 Flight Controller arrives with new features and improvements over the original. This FC features a STM32H743VIT6 MCU running ...
View full detailsINSIDE THE CUBE An STM32F427 Rev 3 Flight management unit. (where the flight controller lives.)An STM32F100 I/O processor with pass through capabi...
View full details