Skip to content
Free Shipping for orders over R1000*
Free Shipping for orders over R1000*

Nazgul Evoque F5D V2 HD BNF - 6S

Original price R 0.00 - Original price R 16,579.00
Original price R 0.00
R 12,999.00
R 12,999.00 - R 16,579.00
Current price R 12,999.00
Type: No GPS and No Rx

In stock at supplier

Add to Wishlist

This iFlight BNF Nazgul Evoque F5D V2 HD features the DJI Camera. 

We also carry the iFlight BNF Nazgul Evoque F5X HD.

The new iFlight Nazgul Evoque is a true work of art. They have added stack protectors to make sure you never have unwanted debris on your stack. The XT60 connector is mounted to the body, meaning that it cannot shift in flight leading to a cut lead. It also sports built-in LEDs to make sure your drone is always the center of attention.

Features

  • Lightweight Side Panels - Keep Your Rig Clean
  • Secured Integrated XT60 Battery Plug - As Safe, It Can Be
  • High-Performance Electronics New Blitz Mini Stack
  • XING2 Performance Motors - The Best Motors Just Got Better
  • Illumination - Let It Be Green!
  • Digital HD Experience - DJI O3 Airunit and camera

Specifications

  • Weight: 412g
  • Propeller Size: 5"

iFlight Blitz Mini F7 FC

  • MCU: STM32 F722
  • Gyro: MPU6000
  • Baro: NO
  • OSD: IFLIGHT OSD (AT7456E)
  • BEC: 5V 2.5A
  • BlackBox: 16MB
  • UARTS: 5 
    UART1 for VTX HD/Analog
    UART2 for  Receiver
    UART3、UART4 for GPS or other sensors that require a serial port
    UART6 for ESC Telemetry

  • 1x I2C    
  • 1xSH1.0 9pin connector for HD VTX/Analog VTX&CAM (5V/BAT/G/VO/T1/R1 /5V/G/VI)
  • 1x SH1.0 8pin connector for ESC(R6/CUR/M4/M3/M2/M1/BAT/G)
  • 1x SH1.0 6pin connector for Any Receiver or DJI(3V3/R2/5V /G/R2/T2)
  • 1x SH1.0 4Pin  connector GPS (T4/R4/G/5V)
  • 1x SH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)
  • 4x 0402 LEDs for FC STATUS (3.3V Red) / (Start Blue) / (5V Green)/(BAT Orange)
  • VTX protocol: Smartaudio & IRCTramp  supported
  • WS2812 LED Strip:Yes
  • Beeper:Yes
  • Firmware: IFRC-IFLIGHT_BLITZ_F722
  • Dimensions: 30.5*27mm / 20*20mm φ4 mounting
  • Weight: 5.0g 

iFlight Blitz Mini E55A 4in1 ESC

  • Input: 2-6s LiPo
  • Constant: 55 Amps (per channel)
  • Burst: 60 Amps (per channel)
  • MCU: BB21
  • Target: QH-50 16.7
  • BEC: No
  • BlHeli32 telemetry: Yes
  • Dimensions: 42x35mm 
  • Mounting Dimensions: 20x20mm, 3mm (2mm w/ grommets)
  • Weight: 11.3g  

      DJI Camera

      • Product Name: DJI O3 Air Unit

        Weight: Approx. 36.4 grams(headband included)

        Communication Bandwidth: Max 40 MHz

        FOV (single screen): 155°

        Communication Frequency:2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX)

        End-to-End Latency

        With DJI FPV Goggles V2:

        810p/120fps Video Transmission Quality: The latency is lower than 28 ms.

        810p/60fps Video Transmission Quality: The latency is lower than 40 ms.

        With DJI Goggles 2:

        1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.

        1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.

        Max Video Transmission Bitrate: 50 Mbps

        Max Video Transmission Range:10 km (FCC), 2 km (CE), 6 km (SRRC)

        Operating Temperature Range: -10º to 40º C (14° to 104° F)

        Power Input: 7.4-26.4 V 

        Audio Transmission: N/A

        Includes

        • 1x iFlight BNF Nazgul Evoque F5D V2 HD Deadcat 5" Quad w/ DJI O3 Airunit - 6S

        NB Excludes

        • Receiver

         

        Customer Reviews

        Be the first to write a review
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)

        Customer Reviews

        Be the first to write a review
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)