Matek F405-SE Flight Controller
Sold out
Original price
R 0.00
-
Original price
R 0.00
Original price
R 0.00
R 1,303.48
R 1,303.48
-
R 1,303.48
Current price
R 1,303.48
The Matek's line of F4 flight controllers brings a host of new possibilities to your fixed wing or multirotor. This F4 FC features STM32F405RET6, MPU6000, DPS310, OSD, SD slot, 6x UARTs, 2x I2C, 9x PWM outputs.
Specifications
- MCU: 168MHz STM32F405RET6
- IMU: MPU6000 (SPI)
- Baro: DPS310 (I2C)
- OSD: AT7456E (SPI)
- Blackbox: MicroSD slot (SPI)
- VCP & 6x Uarts, 1x Softserial_Tx supported
- 9x PWM outputs (7x Dshot compatible with BF/INAV)
- 2x I2C
- 3x ADC (voltage, current, RSSI)
- 4x RX6 pad(one per corner) for BLheli32 ESC telemetry
- 4x individual ESC power/signal pads
- 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- Built-in inverter on UART2-RX for SBUS input
- PPM/UART Shared: UART2-RX
- Vbat filtered output power for VTX
- Camera control: Yes
- Smart audio & Tramp VTX protocol: Yes
- DJI FPV OSD protocol: Yes
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: Yes
PDB
- Input: 6~36V (2~8S LiPo) w/TVS protection
- PDB: 4x35A (Max.4x46A)
- BEC: 5V 2A cont. (Max.3A)
- LDO 3.3V: Max.200mA
- Current Sensor 184A (Scale 179 in INAV/BF)
- Battery Voltage Sensor: 1K:10K
Firmware
- INAV: MATEKF405SE
- BetaFlight: MATEKF405SE
- ArduPilot: MATEKF405-WING
Physical
- Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
- Dimensions: 36 x 46 mm
- Weight: 10g
Includes
- 1 x F405-SE
- 6 x silicon grommets M4 to M3
- 1 x FR4 PCB Plate 36*36*1mm
- 1 x Rubycon ZLH 35V/470uF (Low ESR)