Skip to content
Free Shipping for orders over R1000*
Free Shipping for orders over R1000*

Matek H743-WING Flight Controller V3

Sold out
Original price R 0.00 - Original price R 0.00
Original price R 0.00
R 2,999.00
R 2,999.00 - R 2,999.00
Current price R 2,999.00
Version: V3
Currently unavailable
Add to Wishlist

Matek's H743-WING V3 Flight Controller arrives with new features and improvements over the original. This FC features a STM32H743VIT6 MCU running at 480MHz, dual gyro - ICM42688-P(SPI1) + ICM42605(SPI4), DPS310 (I2C2) barometer, and much more. 

Compared to V2, the board now has updated gyros and color has changed to blue.

Specifications:

  • MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
  • IMU: ICM42688-P(SPI1) + ICM42605(SPI4)
  • Baro: Infineon DPS310 (I2C2)
  • OSD: AT7456E (SPI2)
  • Blackbox: MicroSD card slot (SDIO)
  • 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
  • 13x PWM outputs(including “LED” pad)
  • 2x I2C
  • 1x CAN
  • 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 1x SPI3 breakout
  • USB/Beep Extender with Type-C(USB2.0)
  • Dual Camera Inputs switch
  • 5V/9V(12V) for Camera/VTX power switch
  • High-Precision Current Sense (90A Continuous, 220A Peak)
  • Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV,  BATT_VOLT_MULT 11.0 in ArduPilot)
  • ADC VB2 voltage divider: 1K:20K
  • ADC AirSpeed voltage divider: 20K:20K
  • Static power 160mA@5V

  • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
  • Dimensions: 54 x 36 x 13 mm
  • Weight: 30g with USB extender

Firmware:

  • ArduPilot(ChiBiOS): MATEKH743
  • INAV: MATEKH743

PDB:

  • Input voltage range: 8~36V (3~8S LiPo) w/TVS protection
  • 2x ESC power pads
  • Current Senor: 220A,  3.3V ADC  (Scale 150 in INAV,  66.7 A/V in ArduPilot)
  • Sense resistor: 90A continuous, 220A peak.

BEC 5V output:

  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
  • Output 5.15  +/- 0.1V DC
  • Continuous current 2 Amps,  3A Peak

BEC 9V /12V output:

  • Designed for Video Transmitter, Camera, Gimbal ect.
  • Continuous current 2 Amps,  3A Peak
  • 12V option with Jumper pad

BEC Vx output:

  • Designed for Servos
  • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
  • Continuous current 8 Amps,  10A Peak

BEC 3.3V output:

  • Linear Regulator
  • Continuous current: 200mA

Includes:
1x Matek H743-WING V3 Flight Controller
1x USB (Type-C ) / Passive Buzzer Extender
1x 20cm JST-SH-6P to JST-SH-6P cable for USB Extender
2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C Port
1x Rubycon ZLH 35V 470uF Capacitor
Dupont 2.54 pins (Board is shipped Unsoldered)


Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jacob Conradie
Matek H743

An awesome Flight Controller, just do note that it requires one to be somewhat proficient with soldering. It does seem to resist a bit, go liberal on the flux. If you're new to this part of the hobby I'll advise you to rather use something like the Pixhawk range, their plug and play layout does make the whole setup a lot easier.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jacob Conradie
Matek H743

An awesome Flight Controller, just do note that it requires one to be somewhat proficient with soldering. It does seem to resist a bit, go liberal on the flux. If you're new to this part of the hobby I'll advise you to rather use something like the Pixhawk range, their plug and play layout does make the whole setup a lot easier.