support@flyingrobot.co.za
support@flyingrobot.co.za
Save 30%
Save %
Cross-polarized (dual polarized) MIMO receiver antenna for diversity goggle modules. Can be mounted to goggle modules and will work like two linear...
View full details
Save 50%
Save %
Stock replacement grip tape for the Exway X1
Save 20%
Save %
The Genesis is an 11dbi Linear Array designed for today's modern 5Ghz band High Definition FPV systems. This single panel array houses five Vertica...
View full details
Save 30%
Save %
The Cyclops is a circular array designed specifically to work with the new DJI FPV HD system. This single panel array houses four left hand circula...
View full details
Save 30%
Save %
Replacement Vortex 230 Mojo 4mm carbon fiber arm and blue, original color, plastic ESC cover. Includes 1x Vortex 230 Mojo - Crash Kit 3 - CF Arm
Save 19%
Save %
NEED PROTECTION? WE GOT IT! So it happens, TBS Triumphs have a hard knock life. Sick of losing Antennae from bumps and bruises? Protect your Signal...
View full details
Sold out
All the screws required for Vendetta II replacements.
Save 24%
Save %
GensAce 8500mAh 60C Lipo - 8AWG The Gens ace 14.8V 60C 4S 8500mAh Lipo Battery Pack provides all the wild power you need for your RC cars, just the...
View full details
Save 10%
Save %
Product Type: LiPo Battery Pack Gens Ace 5300mAh 2S 30C 7.4V LiPo Battery for RC Airplane, Jet, RC Boat, AE, RC Helicopter etc. Capacity: 5300mAh ...
View full details
Sold out
Description - Cube Orange+ Mini Set (HX4-06229) The Cube Orange+ features a high-performance H7 processor. The Cube Orange+ has upgraded IMUs and ...
View full details
Save 52%
Save %
Book a viewing today: IF1200A Drone Viewing Appointment Inspired Flight IF1200A: Heavy-lift Hexacopter (Pre-owned) Unrivaled Endurance. Limitless P...
View full details
Save 17%
Save %
This is the FrSky FAS-40 Battery/ESC Current Sensor. The FAS-40 can be used to measure the Current (A) and Power Consumption (mAh) of the battery a...
View full details
Sold out
SPECIFICATION MCU: STM32F411 GYRO:BMI270 VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8G...
View full details
Save 32%
Save %
Shendrones 3.0 Thicc base, frame and 3d printed parts and landing gear
Sold out
EV-PEAK CD3 AC/DC Multi-function balance charger for rc lipo dual battery charger (2x 25Amps/200Watts) with touch screen. Features HIGH POWER! 2 ...
View full details
Sold out
PRODUCT DESCRIPTION Features: *High-strength 5mm Steel shaft *Japanese NSK φ8*φ3*4 bearings *N52H curved magnets *Motor wires protected *Dynam...
View full details
Sold out
The XILO Lipo batteries offer the best bang for your buck! These batteries have an awesome performance with 100C discharge capability and cost a f...
View full details
Sold out
Save 30%
Save %
Overview: The 2195 high-altitude low-noise propeller can increase the maximum flight height of Matrice 300 RTK, so it is recommended for operatio...
View full details
Save 29%
Save %
FrSky Tandem X20/X20S Radio Transmitter M11 Throttle Gimbal Parts Replacement Description: Brand Name: FrSky Item Name: M11 Gimbal Weight: 200g C...
View full details
Sold out
CZI LP12SEARCHLIGHT & SPEAKER SYSTEM FOR DJI MATRICE 30 SERIES LP12 is a searchlight and broadcasting integrated payload designed specifically...
View full details
Save 0%
Save %
Overview The Zenmuse P1 integrates a 45 MP full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. Designed for...
View full details
Sold out
Please be aware these have been cycled 2-3 times for testing. Compared with traditional battery, Diamond solid-state lipo battery achieves both s...
View full details
Save 82%
Save %
The DJI Battery to Power Bank Adapter for Mavic 2 Pro/Zoom/Enterprise Batteries allows you to transform your Intelligent Flight Batteries into high...
View full details
Save 30%
Save %
Save 30%
Save %
Foxeer Legend 2 Lens and Lens Module
Save 19%
Save %
1x Left inner camera pod plate 1x Right inner camera pod plate
Save 30%
Save %
2x FrenZy Outer Camera Pod Plates
Sold out
Set of four arms for the Micro Alien Frame Can use up to a 3" prop with these arms.
1x CL1 SpareTop Plate
Includes: 1x 2mm side plate
Save 30%
Save %
Replacement Y-Arms for the TBS Source PodRacer 5". Thickness: 5mmINCLUDES 2 x TBS Source PodRacer 5" - Spare Y-Arms 1 x Screws set
Save 30%
Save %
Replacement Lite-Arms for the TBS Source PodRacer 5". Thickness: 5mmINCLUDES 4 x TBS Source PodRacer 5" - Spare Lite-Arms 1 x Screws set
Save 20%
Save %
Pixhawk 4 Alu Case
Sold out