support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
1x 10cm RPSMA Male to Right Angle RPSMA Female
Save 0%
Save %
Connector Type: 3 pin 3.5mm bullet plug. Weight: 9.6g per pair (including sleeves).
Save 0%
Save %
1 x Male Connector,1 x Female Connector,2 x Wire Guiding Sleeves
Save 58%
Save %
The classic 1.3GHz Crosshair from VAS has received an update. The Crosshair was always known for its power and penetration, and the Crosshair XTREM...
View full details
Save 42%
Save %
A pair of gloss white module doors for the ImmersionRC rapidFire Receiver. This version comes in gloss white to match many versions of Fat Shark go...
View full details
Save 0%
Save %
Sold out
The EasyLight is a no fuss no wires flashing LED light that is self-contained with its own internal battery. These LED strobes are perfect for comm...
View full details
Save 30%
Save %
Replacement Vortex 230 Mojo 4mm carbon fiber arm and blue, original color, plastic ESC cover. Includes 1x Vortex 230 Mojo - Crash Kit 3 - CF Arm
Save 0%
Save %
DESIGNED BY IBCRAZY This filter improves video reception for 1.2-1.3GHz video receivers in combination with TBS Crossfire. Due to the poor filteri...
View full details
Sold out
INCLUDES~60pcs - 1.0mm - 38mm Red~60pcs - 1.5mm - 38mm Black~50pcs - 2.0mm - 38mm Yellow~50pcs - 2.0mm - 38mm Black~50pcs - 2.5mm - 38mm Red~50pcs ...
View full details
Sold out
With the TBS UNIFY PRO32 Nano we have boosted the output power, improved the robustness, decreased the power consumption, added capability for ins...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-ILS Quantity: 1Pc Length: approx. 1...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-C1 Quantity: 1Pc Length: approx. 10...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-I Quantity: 1Pc Length: approx. 103...
View full details
Save 0%
Save %
SPECIFICATION Propeller Diameter: 5 inch Pitch: 3.1 Blades: 3 Material: Poly Carbonate Weight: 3.6g Hub Diameter: 12.5mm Hub Thickness: 6mm Shaft...
View full details
Save 0%
Save %
Connection Cable KISS FC / FC V2-> 24A PDB KISS FC / FC V2-> 25A 4in1 ESC Connection Cable to connect the KISS FC / FC V2 to the KISS Carri...
View full details
Sold out
Yet again TBS is redefining long range flying! With the TBS Crossfire Diversity Nano RX we have taken the most powerful Crossfire receiver. Presen...
View full details
Sold out
A compilation of all the best practices and lessons learned. The smallest, most robust and full-featured video transmitter from TBS in a RACE form...
View full details
Sold out
Please select hub size( 1.5mm or 1mm) in drop down Check out that sexy smoky black tho! TBS is super proud of our new 40mm props line-up! We took...
View full details
Sold out
Within this boxy box there is many spools of the most important types of multi-stranded wire that one might ever be in need of. We here at Ethix h...
View full details
Save 0%
Save %
Please select front(Short) or back(long) arm 1x Laser S Arm
Sold out
The FrSky Wireless USB Dongle For Simulator allows you to wirelessly connect your FrSky transmitter to computer to use with most simulators. Just i...
View full details
Sold out
The RX6R is a standalone receiver with all the functions of X6R, it features 6 PWM outputs with extremely high precision and low latency. The laten...
View full details
Sold out
Specification:Radio Transmitter Cover Case ShellVersion: Carbon FiberOriginal Parts for Frsky Taranis Q X7S Radio TransmitterPackage Included:1x Co...
View full details
Sold out
The FrSky S.BUS to PWM Decoder allows you to use any standard analogue or digital servos with your S.BUS compatible receiver. This eliminates the n...
View full details
Sold out
2 x Samsung 30Q Li-ion INR 18650 Batteries Buy in pairs and save Huge Capacity = Less Charging With a 3000mAH capacity that makes other 18650s look...
View full details
Sold out
If you are looking for an easy way to add some bling to your quadcopter drone, then the Matek 2812 LED controller is an ideal option. for a number...
View full details
Sold out
A new innovative lighting system from Matek that will make your FPV quad look the business. A choice of 4 LED or 6 LED strips are available and can...
View full details
Save 0%
Save %
A pair of hand tuned antennas to be used with the TBS Crossfire 8ch diversity receiver. SMA connector.
Sold out
Specification:Brand Name: STPItem Name: M8 Motor Propeller Quick Release RC Tool Wrench Material: 7075 Aluminum AlloyUsage: quick release M8 Nut Le...
View full details
Save 0%
Save %
2 × T10x4.5 plastic self-locking propellers (1 CW and 1 CCW)Matched to the T-motor Air 2216 880kv motors
Sold out
2 × MF2211 Polymer Carbon fibre propellers (1 CW and 1 CCW)
Save 51%
Save %
Exway Screw set
Save 50%
Save %
Over time your motor covers can get chipped or dented. These replacement motor covers are a great way to freshen up your Exway X1.
Save 50%
Save %
Stock replacement grip tape for the Exway X1
Sold out
This flexible connector cable interfaces MMCX to SMA antennas. The SMA connector has a backing nut for bulkhead installations. Features Gold-plate...
View full details
Sold out
2x CL1 5mm Spare Arm
1x CL1 SpareTop Plate
Save 30%
Save %
Compatible with all Alien PDB's
Save 0%
Save %
FEATURES The Stout bell has the same efficiency as the Silk but with more power Upgraded more powerful magnets giving the overall feel of the motor...
View full details
Save 0%
Save %
A SMA to SMA extender with magnetic base. You may use this extender on your Crossfire, 2.4gHz or 5.8gHz devices with minor signal loss SPECIFICATI...
View full details
Save up to 0%
Save %
This filter is a combination of a high-quality tempered glass and a neutral density filter (ND4). These protectors are low cost and are easily repl...
View full details
Save up to 0%
Save %
Lens is cut using industrial strength lasers. The result is a clean and extremely sharp finish absent of "Micro-scratches". (The tiny spots on your...
View full details
Save 0%
Save %
Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every version of the Cube flight controller. With smaller...
View full detailsVibration reducing rubber bushings to help eliminate jello in your HD footage. Offered in four different durometer ratings (Hardness) - 40,50,60 ...
View full detailsIncludes: 10x M3X6 Screws 5x 25mm Standoffs
Includes: 1x 2mm side plate