support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
UBEC DUO 4A/5~12V & 4A/5V This device is a high-efficiency, switch-mode buck regulator with two output channels. It works with 7~26Vdc input. ...
View full details
Save 0%
Save %
A replacement trim switch for the FrSky X9D Transmitter.
Save 0%
Save %
This is a replacement 2.4GHz antenna for the FrSky XSR receiver. Requires soldering to replace.
Save 0%
Save %
Connector: IPEX4 Compatible receivers: X4R / X4RSB / S6R / RXSR / XM / XM+ Length: 150mm Includes 1 X Receiver Antenna
Save 58%
Save %
Spare parts for the QX90 Microquad frame. Included: 4 x Motor grommets 1 x Buzzer 1 x Power Cable 6 x Nylon standoffs 1 x Upper Board 1 x Pack of ...
View full details
Save 0%
Save %
This is a set of 8 aluminum standoffs, tapered, and with a textured finish (25mm). Threaded on both ends for a M3 screw.What's included8x aluminu...
View full details
Save up to 0%
Save %
This is a set of 8 aluminum tapered and textured standoffs (35mm). Threaded on both ends for a M3 screw. What's included8x aluminum 35mm standoffs...
View full details
Save 0%
Save %
Description The PowerWhoop Connector is here! These connectors are far superior to the current standard (Micro JST) and are easy to solder on. The...
View full details
Save 0%
Save %
1S 3.7V 2-Pin Battery Cable
Save 42%
Save %
This Set of leads makes charging 4 1s batteries possible using a conventional smart charger. More flying in less time. Go on, you know you want it.
Save 0%
Save %
2s Balance plug PH2 connector with wires
Save 0%
Save %
Balance lead extension to fit chargers that charge up to 4s lipos.
Save 0%
Save %
Specifications: Speed: 14,000KvOperating Voltage: 1.5-3.7VMax. Thrust: 15g Load Current at 3.7V: 2.0ADimensions:Diameter: 6mmLength: 15mmShaft Dia...
View full details
Save 29%
Save %
Standard ZMR250 front or FPV Carbon camera mounting plate.
Save 0%
Save %
Genuine FrSky 3 way switch for the Taranis -long Specs: Weight: 4.5gDimensions: 12.7 x 7 x 43mmSwitch Positions: 3
Save 0%
Save %
Genuine FrSky 3 way switch for the Taranis - short Specs: Weight: 4.5gDimensions: 12.7 x 7 x 34mmSwitch Positions: 3
Save 0%
Save %
Genuine FrSky 2 way switch for the Taranis-long Specs: Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 2
Save 0%
Save %
Genuine FrSky momentary switch for the Taranis Specs Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 1
Save 0%
Save %
Size: M3 (3mm) Length: 16mm Available colors: Green, Red and Purple Includes: 8x M3x12mm screws
Save 0%
Save %
Size: M3 (3mm) Length: 12mm Available colors: Green and PurpleIncludes: 8x M3x12mm screws
Save up to 0%
Save %
Dimensions are as follows: Outer Diameter: 8mm Inner Diameter: 3mm Overall Height: 2mm Countersink Diameter: 5.5mm
Save 0%
Save %
These cables will give you more juice to your whoop! According to micro motor godfather Benedikt at Micro Motor Warehouse the stock battery pigtai...
View full details
Save 0%
Save %
This is a set of 8 nylon standoffs, in a hexagonal shape (35mm). Threaded on both ends for a M3 screw.What's included8x nylon 35mm standoffs