support@flyingrobot.co.za
support@flyingrobot.co.za
Matek Systems are an electronic design company, established in 2016 and based in China. They distribute electronic products to the worldwide market. Matek Systems has over 10 years of electronic research and design experience in DC power systems. Everything including Charger / Discharger, Voltage and Current Detectors, Direct Current Power Devices, and more.
Save 0%
Save %
I2C-INA-BM is an ultra-precise digital power monitor based on TI INA228. The resistance of this conductive path is 200 μΩ typical, providing low p...
View full details
Save 0%
Save %
Power Module PM12S-4A Specifications Wide 9V to 55V Operating Input Range with TVS protection 2x independent Step-Down Voltage Reg...
View full details
Save 0%
Save %
M9N-G4-3100 is based on ArudPilots’ AP_Periph firmware, It is a GNSS+COMPASS peripheral with CAN/DroneCAN and UART/MSP interfaces. M9N-G4-3100 us...
View full details
Save 0%
Save %
CAN-L4-RC is an Adapter Node based on ArudPilot AP_Periph firmware. Using this adapter to turn Serial receiver into CAN receiver. Specifications ...
View full details
Save 0%
Save %
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware. RM3100 sensor technology provides high re...
View full details
Save 0%
Save %
Specifications 9V to 55V Operating Input Range Vx for servos, 5V, 6V, 8V Adj. Default is 5V. Synchronous switching step-down (buck) regulator w...
View full details
Save 0%
Save %
CRSF-PWM Converter, CRSF-PWM-6 Compatible with CRSF protocol receiver only Support any CRSF protocol receivers (including 433MHz, 868MHz, 915MHz, ...
View full details
Save 0%
Save %
The Mateksys CAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware. With this board, you can easily utilize the ArduPilot driver li...
View full details
Save 0%
Save %
Features Wide 9V to 55V Operating Input Range with TVS protection 3x Output voltage options, 5.2V, 8V or 12V. Default 5.2V. Synchronous switchin...
View full details
Save 0%
Save %
Specifications Hall effect current sensor No voltage drop and heat on current sensor components Offset and Sensitivity are calibrated in factory C...
View full details
Save 0%
Save %
The Matek Digital Airspeed Sensor ASPD-DLVR features CAN JST-GH connector, UAVCAN Protocol UART1, UART2, UART3 among many other cool features! S...
View full details
Save 0%
Save %
The Mateksys Digital Airspeed Sensor ASPD-4525 features a ASPD-4525 sensor board, JST-GH to JST-GH 20cm silicon cable, pitot tube and a clear sili...
View full details
Save 0%
Save %
Specifications Sensor: All sensors DLVR-L10D, Industrial temperature range DLVR-L10D Sensor datasheet, pls visit www.allsensors.com Interface:...
View full details
Save 0%
Save %
M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNS...
View full details
Save 0%
Save %
The Matek 1.2-1.3Ghz Antenna is one of the most durable and well-made antenna designs on the market today. When you use it we are confident you wi...
View full details
Save 0%
Save %
Get the voltage you need with this Matek BEC, convert 6-25V to either 5V, 9V, or 12V. This BEC defaults to 5V, select either 9V or 12V by solderin...
View full details
Save 0%
Save %
FEATURES High Efficiency Synchronous Step-down regulator Wide 2-8S (6-30V) Operating Input Range Continuous load current: 1.5 Amps (Max....
View full details
Save 0%
Save %
PDB Input voltage range: 6~60V (2~12S LiPo) PDB/current sense resistor: 140A cont, 264A burst. ESC power pads: 60A cont. 100A burst 6x ESC power /s...
View full details
Save 0%
Save %
The Matek H7A3-SLIM Flight Controller features STM32H7A3VI, ICM20602 & MPU6000, DPS310, OSD, 7x UARTs, 2x I2C, 1xCAN, 13x PWM outputs, BEC5V an...
View full details
Save 0%
Save %
Matek's H743-WING V3 Flight Controller arrives with new features and improvements over the original. This FC features a STM32H743VIT6 MCU running ...
View full details
Save 0%
Save %
4x Matek FC Anti Vibration Standoffs M2
Save 0%
Save %
Matek anti-vibration bobbins for Flight Controllers M3 x 7mm + 4.5mm 4pcs
Save 0%
Save %
UBEC DUO 4A/5~12V & 4A/5V This device is a high-efficiency, switch-mode buck regulator with two output channels. It works with 7~26Vdc input. ...
View full details