Latest

The FrSky Variometer sensor calculates the altitude from atmospheric pressure. Atmospheric pressure will get lower as you go up in altitude, using ...

1x JR servo lead 22AWG male to female 60cm

1x JR servo lead 22AWG male to female 45cm

The FrSky air speed sensor was designed for the FrSky smart port enabled system.  With its easy install it is an easy way to get air speed data.  ...

Description: Color: WhiteType: 2S, 3S, 4S, 5S, 6SSize: 20mm * 22.5mm * 8mm (MAX)Weight: about 3 gramsMaterial: Polypropylene (PP)Max temperature: 1...

(2CW+2CCW) - Poly Carbonate

Finally a purpose built FPV earbud that we have engineered from the ground up to favor sound quality from onboard microphones! We hand-selected th...

SPEKTRUM DSMX QUAD RACE SERIAL RECEIVER WITH TELEMETRY (SPM4649T) The SPM4649T quad racing serial receiver offers full-range performance with inte...

A new diversity receiver for FlySky radios. Tested for extreme reliability and no fail safes. It has been designed from the ground up for the sole ...

XT60 Male 10 cm Pigtail (Black)

Standard replacement gimbal for Q-X7 radio

Foam lipo pad - conforms to Reverb top plate 4mm thick to protect the lipo from screw heads.

Output Voltage: 5V@3A or 6V@3A (Selectable by using a jumper connector)Continuous output current: 3 AmpsInput: 5.5V-26V (2-6S Lipo or 5-18 cells N...

Cell Count: 2 S Voltage: 7.4V Capacity: 800 mAh Discharge: 20C Dimention Length: 55 mm Dimention Width: 29 mm Dimention Height: 14 m...

Cell Count: 4 S Voltage: 14.8V Capacity: 3300 mAh Discharge: 45C Dimention Length: 136 mm Dimention Width: 43 mm Dimention Height: ...

With improved signal sensitivity and durability, the Immortal T v2 antenna is the perfect companion for race quads. The centerpiece housing is made...

Key Features Patent-pending gimbal design with spring configuration switch DSMX Wireless trainer link Virtually unlimited model memory-transmitt...

Standard TBS Video transmitter cable used in all TBS 2.4GHz and 5.8GHz systems. Provides 5V to the TBS Video transmitters.   *compatible with TBS U...

NOTE: M3 (3mm) Only fits stock Taranis QX7 and X9D gimbals Details FrSky CNC machined Aluminum Gimbal Stick Ends for Transmitter Stick with anti-l...

Steps down 5v to 3.3v.  Perfect for connecting any Spektrum satellite receiver to a flight controller.

Lipo Pad Conforming to the 5" Alien Top Plate Designed to protect the lipo from screw heads. The material is between neoprene and rubber in densit...

PDB KIT 4oz Copper - 2mm PCB XT-60 pair and spacer (9x) M3 Press nut - Stainless Steel   PDB Weight including 4 press nuts 15g XT-60 Weight 3...

Carefully crafted hand tools selected by TBS for all your modifications and repairs.  Heat treated for extra hardness. Anodized black because blac...

NOTE: M4 (4mm) Fits both M7 and M9 Hall Sensor Gimbals Details FrSky CNC machined Aluminum Gimbal Stick Ends for Transmitter Stick with anti-locki...

3D printed from flexible TPU. This mount is specifically designed to make use of the SMA/RP-SMA mount of the TBS Unify VTX.Rigid enough to keep you...

Please email us at 3dprint @ flyingrobot.co.za with your 3D print requirements and STL file.  We can then give you a quote. Materials and colours a...

Allow for 1-2 days wait as mounts are printed GoPro Session/RunCam3 30 degree mount. 3D printed right here in the Flying Robot factory from flexibl...

Very small, lightweight, minimal, yet highly functional! The FRSKY XM+ SBUS Receiver is perfect for FPV racing. It has as good of range as ...

Connector: IPEX4 Compatible receivers: X4R / X4RSB / S6R / RXSR / XM / XM+ Length: 150mm Includes 1 X Receiver Antenna

Description  8pcs) pack of Stainless Steel button head hex screws.  M3 Screw  10MM Length

Description  8pcs) pack of Stainless Steel button head hex screws.  M3 Screw  12MM Length

Description:Item: Balance Extension CablePlug: Male to Female Standard XH2.54Silicone Wire:20AWGHeat resistance:200°(100 x 0.88mm copper wire insid...

A NEW ERA OF CONNECTIVITY The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communica...

Genuine FrSky 3 way switch for the Taranis -long Specs: Weight: 4.5gDimensions: 12.7 x 7 x 43mmSwitch Positions: 3

Genuine FrSky 2 way switch for the Taranis-long  Specs: Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 2

Genuine FrSky momentary switch for the Taranis  Specs Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 1

A spare RPSMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.

A spare SMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.