In Stock

Designed by : Michael Anderson Made by: TBSDesigned to be small, light, and easy to use. You CANNOT expect full range from this antenna. In fact, ...

A set of 2x HQ propellers, 2 blade props with 6mm hole. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets of 2 of the same...

Replacement Antenna for FrSky XM/XM+ RXSR Receiver (10cm) Connector: IPEX4  Length: 10cm Includes 1 X Receiver Antenna

From the makers of ZEN PLA Ultra, the ZEN Minima range brings sustainability to not only the packaging, but now to the price.The ZEN Team have been...

The RadioMaster RP series of receivers are designed with size, ease of use and range in mind. Utilizing ExpressLRS 2.4ghz Open-source firmware the ...

This is a set of 8 aluminum standoffs, with a textured finish (20mm). Threaded on both ends for a M3 screw.What's included8x aluminum 20mm stando...

Current Rating : 40AInstantaneous current : 90AContact resistance : 0.30mΩRated voltage : DC 500VFlame retardant rating : UL94 V0Recommended Applic...

Propeller Diameter: 5.1 inch      Pitch : 3.5                Blades : 3Material : Poly Carbonate        Weight :3.5gHub Diameter :12.5mm          H...

Specs:Item: 2S 7.4V 6200mAh LiPo BatteryNominal Voltage: 7.4VCapacity: 6200mAhWatt Hours: 45.88WhConnector: JST-XH and XT30Charge current: Max 2ADi...

Have you had a bad crash and a prop broke your balance wire? Well worry no more, this cable is used to replace the JST-XH style balance plug on a L...

(2CW+2CCW) - Poly Carbonate

Size: M3 (3mm) Length: 12mm Available colors: Green and PurpleIncludes: 8x M3x12mm screws

PETG 3D printer filament (Polyethylene Terephthalate) is one of the most common used polymers today. It is also used in the manufacture of food pac...

Forged from stainless steel, with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimensions of the...

FEATURES High Efficiency Synchronous Step-down regulator Wide 2-8S (6-30V) Operating Input Range Continuous load current: 1.5 Amps (Max....

The Caddx Ratel 2 HDR Starlight 1200TVL FPV Camera features superb night vision, clear and sharper images. The Ratel 2 is equipped with high quali...

4x Aluminum Stack Standoff 6mm+6mm

Pre Order

Specifications:Item: BOXER RadioSize: 235*178*77mmWeight: 532.5gFrequency: 2.400GHz-2.480GHzInternal RF Options: 4-in-1 multi-protocolSupported pro...

A set of 2x HQ propellers, 2 blade props with 6mm hole. They come with a set of plastic reducers (3,4,5,6 mm). Includes 2x 8x5 CCW or CW black ny...

This filter is a combination of a high-quality tempered glass and a neutral density filter (ND4). These protectors are low cost and are easily repl...

This flexible connector cable interfaces MMCX to SMA antennas. The SMA connector has a backing nut for bulkhead installations. Features Gold-plate...

High quality flexible pure copper and silicone wire.  Specifications Gauge: 8awg Length: 1 meter Ships in 1 meter lengths individually bagged Co...

Power Whoop Connector plug - Male PWC (ph2) with 10cm wire

Mount for a GPS Antenna.

XT30/ XT60 Smoke Stopper, Every quad/drone owner should have one.A smoke stopper can help avoid damage when you power on a mini quad drone for the...

Durable 5.8G antenna for Digital FPV. The perfect upgrade part for your DJI Air Unit to avoid buying fragile stock antennas again and again...  Us...

Forged from stainless steel, carved with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimension...

Race Wire is the perfect upgrade for your racing or freestyle rig.  It simply replaces a section of your motor wires under the tips of the propelle...

DAFA Metal Hobby Knife

Dimensions are as follows: Outer Diameter: 7.8mm Inner Diameter: 3mm Overall Height: 2mm Countersink Diameter: 5.5mm

Check out these TBS x Tinywhoop Race Props, they are absolutely aweosme to fly with. Quad blades to ensure grippy cornering and the fat blades for ...

Size: M3 (3mm) Length: 16mm Available colors: Green, Red and Purple Includes: 8x M3x12mm screws

Output Voltage: 5V@3A or 6V@3A (Selectable by using a jumper connector)Continuous output current: 3 AmpsInput: 5.5V-26V (2-6S Lipo or 5-18 cells N...

TBS UNIFY PRO 5G8 HV 7-PIN VTX PIGTAIL.

4x Matek FC Anti Vibration Standoffs M2

This is a replacement 2.4GHz antenna for the FrSky XSR receiver. Requires soldering to replace.  

SMA to SMA (Male to male)

4x 5mm Threaded Anodised Spacer

Propeller Diameter: 5.1 inch      Pitch : 3.3                Blades : 3Material : Poly Carbonate        Weight :3.5gHub Diameter :12.5mm         ...

1x JR servo lead 22AWG male to female 45cm

This is a set of 8 aluminum standoffs (30mm). Threaded on both ends for a M3 screw. What's included8x aluminum 30mm standoffs Available in Blac...

Get the voltage you need with this Matek BEC, convert 6-25V to either 5V, 9V, or 12V. This BEC defaults to 5V, select either 9V or 12V by solderin...

This damping ball lock is used to prevent the damping balls from falling out especially when there comes the crash, the violent vibration or the ha...