support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
• Longer Flight Time• 100% Balance • Higher Loaded Ability• Lightweight / High-strength
Save 0%
Save %
T-Motor 60A Flame ESC. The special core program for multirotor controllers greatly improves throttle response. Specially optimized software for ex...
View full details
Save 24%
Save %
GensAce 8500mAh 60C Lipo - 8AWG The Gens ace 14.8V 60C 4S 8500mAh Lipo Battery Pack provides all the wild power you need for your RC cars, just the...
View full details
Save 0%
Save %
The Matek H7A3-SLIM Flight Controller features STM32H7A3VI, ICM20602 & MPU6000, DPS310, OSD, 7x UARTs, 2x I2C, 1xCAN, 13x PWM outputs, BEC5V an...
View full details
Save 0%
Save %
Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every version of the Cube flight controller. With smaller...
View full details
Save 0%
Save %
Description:Brand name: HawkeyeModel: Firefly Split Product weight: 19g Package weight: 60g Camera Size: 19MM×19MM / 22×22MM Product size (L x...
View full detailsFrSky ARCHER PLUS SR12+ Overview The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer...
View full details
Save 0%
Save %
RFD868ux: This is the RFD868ux on a double sided mini carrier board. It comes with a mini JST connector and 2x u.Fl RF connectors and heat sink. *...
View full details
Save 0%
Save %
Feature Supports 2-14S & 200A Cont, 400A Burst DroneCAN Communication Protocol Small & Compact Design Two 5V Output with Independent BEC...
View full details
Save 0%
Save %
Specifications & Features ArduPilot AP_Periph L431 CAN node All sensors AUAV-L30D CAN & I2C Interface CAN JST-GH connector, DroneCAN Pro...
View full details
Save 0%
Save %
Specifications Sensor: All sensors DLVR-L10D, Industrial temperature range DLVR-L10D Sensor datasheet, pls visit www.allsensors.com Interface:...
View full details
Save 0%
Save %
M9N-G4-3100 is based on ArudPilots’ AP_Periph firmware, It is a GNSS+COMPASS peripheral with CAN/DroneCAN and UART/MSP interfaces. M9N-G4-3100 us...
View full details
Save 0%
Save %
WHY NANO?The Nano TX is designed to be installed in X-lite and X9D Lite radios with the "Lite" interface. Performance, functionalities, and even pr...
View full details
Save 0%
Save %
Cube Node ETH
Save 0%
Save %
FrSky TD SR6 Receiver The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Gh...
View full details
Save 0%
Save %
Top Features:- DJI HD VTX CONNECTOR (PLUG-AND-PLAY / NO SOLDERING REQUIRED)- 2022/FEB: VERSION UPDATED TO V1.1 / GYRO CHANGED TO BOSCH BMI270 D...
View full details
Save 0%
Save %
KST Servos are renowned for Quality at realistic prices. From Hobby helicopters and gliders to Industrial and UAV applications KST servos have earn...
View full details
Save 0%
Save %
The X-Cross HV3 80A 5-12S ESC by Flycolor features quality MOSFETs, BLHeli_32 firmware, an ARM 32-bit Cortex MCU, Telemetry, and more! Features A...
View full details
Save 0%
Save %
MINIWARE Smart Soldering Iron TS101 is an upgraded version of Mini Soldering Iron TS100. Based on TS100, TS101 has been upgraded and optimized in p...
View full details
Save 0%
Save %
The TFMini-S Micro LiDAR Module is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 10 centimeters (+...
View full details
Save 0%
Save %
This Holybro SiK Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m “ou...
View full details
Save 0%
Save %
RC Pro Plus has been at the forefront of battery connector development for years. Providing high quality, and high reliability, RCPP has quickly be...
View full details
Save 0%
Save %
Introducing the ChaddRainsFPV O4/O3 Armer. If you've ever wanted to add HD FPV to an RC car, boat, plane or anything else without a flight controll...
View full details
Save 42%
Save %
The HereFlow is a lightweight (1.2g) finger-sized board that houses an optical flow sensor as well as a Lidar component. Bringing new possibilities...
View full details
Save 0%
Save %
Features Brushless DC motor Programmability Monster torque of 9.3 Kgf.cm Speeds down to 0.07 sec/60deg Hardened Steel Gear Black CNC aluminum case...
View full details
Save 0%
Save %
Description The M9N GPS uses multi-constellation GNSS powered by u-blox M9N, a concurrent GNSS receiver that can receive and track multiple GNSS sy...
View full details
Save 0%
Save %
DESCRIPTION: Compatible with Matrice 300 RTK Pair of foldable propellers Replacement 2110 Propellers for DJI Matrice 300 RTK What's in the box:...
View full details
Save 27%
Save %
Description The DJI O3 Air Unit ND Filters Set includes ND8, ND16, and ND32. The filters are made of high-quality light-reduction materials, and ...
View full details
Save 0%
Save %
The Victory is another new antenna technology from Video Aerial Systems and the mind of antenna developer IBCrazy. Don’t let the square shape and s...
View full details
Save 0%
Save %
High gain directional Crossfire transmitter antenna for ultimate penetration and range. SPECIFICATION Polarization: linear Resonance frequency, ...
View full details