support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
Propeller Diameter: 2.5 inch Pitch : 3.5 Blades : 3 Material : Poly Carbonate Weight :1.3gHub...
View full details
Save 0%
Save %
Connection Cable KISS FC / FC V2-> 24A PDB KISS FC / FC V2-> 25A 4in1 ESC Connection Cable to connect the KISS FC / FC V2 to the KISS Carri...
View full details
Save 0%
Save %
Specifications Hall effect current sensor No voltage drop and heat on current sensor components Offset and Sensitivity are calibrated in factory C...
View full details
Save 0%
Save %
Overview: The SkyRC S100 neo is a sophisticated AC/DC smart balance charger, boasting a sleek and ultra-compact design. It caters to a variety of b...
View full details
Save 0%
Save %
The Power Management Board (PM Board) serves the purpose of a Power Module as well as a Power Distribution Board. In addition to providing regulate...
View full details
Save 0%
Save %
Specifications 9V to 55V Operating Input Range Vx for servos, 5V, 6V, 8V Adj. Default is 5V. Synchronous switching step-down (buck) regulator w...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force conne...
View full details
Save 0%
Save %
Propeller Diameter: 3.5 inch Pitch : 2.5 Blades : 3Material : Poly Carbonate Weight : 1.55gHub Diameter : 10mm ...
View full details
Save 0%
Save %
This filter is a combination of a high quality tempered glass and a neutral density filter.Introducing the new & improved static cling tempered...
View full details
Save 0%
Save %
Propeller Diameter:3inch Pitch :1.8 Blades : 3Material : Poly Carbonate Weight :1.21gHub Diameter : 10mm Hub Thi...
View full details
Save 58%
Save %
The classic 1.3GHz Crosshair from VAS has received an update. The Crosshair was always known for its power and penetration, and the Crosshair XTREM...
View full details
Save 0%
Save %
Converts the SBUS signal into CPPM without the need for any soldering. Simply plug into your SBUS receiver port and your control servo and it will ...
View full details
Save 0%
Save %
Save 0%
Save %
Save up to 0%
Save %
Save up to 0%
Save %
Sensirion SDP3x Airspeed Sensor Ki is built on CMOSens® next generation sensor chip, at the heart of Sensirion’s new differential pressure and fl...
View full details
Save 0%
Save %
8 x 50mm Stainless steel screws
Save 0%
Save %
2 x 100mm long and 25mm wide pieces DESIGN FLEXIBILITY 3M™ Dual Lock™ Reclosable Fastener SJ3550 consists of interlocking mushroom-shaped heads t...
View full details
Save 30%
Save %
Don’t let the small size fool you, the BlueBeam Pro is a high performance CP antenna for your 1.3GHz which sacrifices nothing on account of its siz...
View full details
Save 0%
Save %
Details A set of 2 HQ propellers, 2 blade style with a 6mm center hub. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets ...
View full details
Save 0%
Save %
T-Motor 60A Flame ESC. The special core program for multirotor controllers greatly improves throttle response. Specially optimized software for ex...
View full details
Save 0%
Save %
Propeller Diameter: 7 inch Pitch : 5.5 Blades : 2Material : Poly Carbonate Weight : 6.4 gHub Diameter :14mm H...
View full details
Save 0%
Save %
The Flycolor X-Cross BL-32 ESCs are a high-powered addition to your FPV drone. The built-in 32-bit processor and BLHeli_32 firmware gives a quick r...
View full details
Save 0%
Save %
The X-Cross HV3 80A 5-12S ESC by Flycolor features quality MOSFETs, BLHeli_32 firmware, an ARM 32-bit Cortex MCU, Telemetry, and more! Features A...
View full details
Save 0%
Save %
Amass XT30UD Male and Female pair Max voltage: DC 500V Rated current: 15A Instantaneous current: 30A Contact resistance: 1.20mΩ Insulation...
View full details
Save 0%
Save %
Propeller Diameter: 4 inch Pitch : 2.5 Blades : 2Material : Poly Carbonate Weight :1.45gHub Diameter : 9.8mm ...
View full details
Save 0%
Save %
The Mateksys CAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware. With this board, you can easily utilize the ArduPilot driver li...
View full details
Save 0%
Save %
FC Specifications MCU: STM32F405RGT6, 168MHz , 1MB Flash IMU: ICM42688-P Baro: SPL06-001 OSD: AT7456E Blackbox: 16M Flash 5x UARTs, 1x Softserial...
View full details
Save 0%
Save %
The set includes the following: 1 x Reverse action (clamps when released) 1 x Needle point 1 x Duck bill needle point 1 x Duck bill flat point F...
View full details
Save 0%
Save %
Features : Increases bit life of the soldering iron by up to 10 times 1.0mm Roson coil solder 60 tin /40 led Supplied in handy dispenser
Save 0%
Save %
Save 0%
Save %
Larger Pitot Tube Screw mounting with tube Specifications Pitot Tube M3x10 screws 1m Tube
Save up to 0%
Save %
Upgrading your drone has never been easier! Simply swap the props of your DJI Air 2S and within seconds you get up to 4% more flight time and up to...
View full details
Save 0%
Save %
Rated voltage: DC500V Rated current: 30A Peak current: 60A Contact Resistance: 0.50mΩ Metal material: Brass, gold plated Plastic material: PA...
View full details
Save 0%
Save %
FrSky Transmitter Stand for Taranis X9D X9DP X9DPSE X7 X7SDescription: Brand: FrSky Item Name: FrSky Transmitter Stand Package Included:1 x FrSky T...
View full details
Save 0%
Save %
This is a set of 8 nylon standoffs, in a hexagonal shape (25mm). Threaded on both ends for a M3 screw.What's included8x nylon 25mm standoffs