support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
DESIGNED BY IBCRAZY This filter improves video reception for 1.2-1.3GHz video receivers in combination with TBS Crossfire. Due to the poor filteri...
View full details
Save 0%
Save %
FrSky 3 position long switch for Taranis X9E and X9DP SE
Save 0%
Save %
The PDB-40A has been engineered to provide the highest possible performance and reliability in a 36*57mm 4 layers PCB. 4oz copper,4-layers&1.0...
View full details
Save 51%
Save %
The Lumenier AXII DUO Patch Antenna (RHCP). A ultra-high gain, long range, circular polarized receiver antenna. Designed to provide long range 5.8G...
View full details
Save 30%
Save %
Alloy Case For Monster V2 Camera
Save 0%
Save %
Cell Count:3 S Voltage:11.1V Capacity:3300 mAh Discharge:45C Dimention Length:137 mm Dimention Width:42 mm Dimention Height:20 mm Connector:Deans ...
View full details
Save 0%
Save %
Description: Brand Name: FrSky Item Name: PCB Antenna Usage: Suitable for FrSky X8R X6R receiver Features: Easy to install. Can give about 20% rang...
View full details
Save 0%
Save %
1x Hex CAN or I2C bus splitter
Save 0%
Save %
Save 0%
Save %
PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources. Print temp :- 190 - 2...
View full details
Save 0%
Save %
M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNS...
View full details
Save 0%
Save %
Save 0%
Save %
High quality flexible pure copper and silicone wire. Specifications Gauge: 12awg Length: 1 meter Ships in 1 meter lengths
Save 0%
Save %
The Flycolor Raptor TR20 Mini Stack features an F722 Flight Controller, equipped with dual VTX and dual LED pads, offering a convenient selecti...
View full details
Save 0%
Save %
RadioMaster - UFL 2.4Ghz T Antenna - 65mm for RP/EP series receivers.A suitable replacement for RP and EP series 2.4ghz Receivers.
Save 0%
Save %
Original RadioMaster SC + SD Switch Assembly Replacement Parts for TX16S TransmitterDescription:Brand Name: RadioMasterItem Name: SC + SD Switch As...
View full details
Save 0%
Save %
INSTALLATION Seperate the top and bottom board of your current Fusion module. (2 x 12pins connector) Install the upgraded board to the top board....
View full details
Save 0%
Save %
Save 0%
Save %
Features: Motor wire protectors to prevent from prop strikes. There are different lengths for our iFlight BNFs: 65mm: F5D and F6D rear Arms Chim...
View full details
Save 0%
Save %
Description:Brand name: FlycolorItem number: FlyDragon Lite Continuous current: 40A Instantaneous current (10s): 50A BEC: 5V/3A Support voltage: 2-...
View full details
Save 0%
Save %
Replacement set of five silicone washers made for use on the Lumenier POPO motors. These washers slide over the motor shaft and act as a spring for...
View full details
Save 0%
Save %
Please select front(Short) or back(long) arm 1x Laser S Arm
Save 0%
Save %
These are the motors the inductrix is supplied with and not the upgraded versions. There are two varieties of motors: Clockwise - Grey plastic end ...
View full details
Save 0%
Save %
FEATURES The Stout bell has the same efficiency as the Silk but with more power Upgraded more powerful magnets giving the overall feel of the motor...
View full details