support@flyingrobot.co.za
support@flyingrobot.co.za
45°throttle travel for quick throttle response Hall sensor 4 ball-bearings Adjustable tension Ideal for FPV RACING, 3D and acrobatic fixed wing, 3...
View full details
Save 0%
Save %
They come in sets of 2 of the same direction propellers. You will need to order 1 pair of Standard props and 1 pair of Reverse props for a full se...
View full details
Save 0%
Save %
A set of 4 HQ Prop propellers, 3 blade style with a 6mm center hub. A good prop for small planes and multi-rotors. Rotation: CW and CCW Length: ...
View full details
Save 58%
Save %
Spare parts for the QX90 Microquad frame. Included: 4 x Motor grommets 1 x Buzzer 1 x Power Cable 6 x Nylon standoffs 1 x Upper Board 1 x Pack of ...
View full details
Save 30%
Save %
This filter improves video reception for 1.2-1.3GHz video receivers in combination with TBS Crossfire. Due to the poor filtering on the video anten...
View full details
Save 0%
Save %
Propeller Diameter: 6 inch Pitch : 3 Blades : 3Material : Poly Carbonate Weight : 5.4gHub Diameter :13.2mm H...
View full details
Save 0%
Save %
Package Includes:1. 3P2.54mmpitch 100mm cable*12. 6P 1.25mmpitch 150mm cable*23. 4P 1.25mmpitch 150mm cable*14. Buzzer *15. Safety switch...
View full details
Save 0%
Save %
Features / Specs Frequency Range: 2.4GHz / 5GHz / 5.8GHz Gain: 6dBi SWR: ≤1.5 Impedance: 50 Ohms Material: Black ABS Housing / Gold Plated Copper ...
View full details
Save 0%
Save %
FrSky Taranis 2.4g 250mm receiver antenna- Ipex 4 small type connector Specifications: Brand Name: FrSky Item Name: FrSky 250mm Antenna Length: 2...
View full details
Save 0%
Save %
Never lose or mix up a micro SD card again! Stores up to 10 SD cards in a credit-card sized cradle FPV is all about getting that footage after a...
View full details
Save 0%
Save %
Connector Type: 3 pin 3.5mm bullet plug. Weight: 9.6g per pair (including sleeves).
Save 0%
Save %
Description 8pcs pack of Stainless Steel button head hex screws. M3 Screw 25MM Length
Save 0%
Save %
DESIGNED BY IBCRAZY This filter improves video reception for 1.2-1.3GHz video receivers in combination with TBS Crossfire. Due to the poor filteri...
View full details
Save 0%
Save %
FrSky 3 position long switch for Taranis X9E and X9DP SE
Save 0%
Save %
The PDB-40A has been engineered to provide the highest possible performance and reliability in a 36*57mm 4 layers PCB. 4oz copper,4-layers&1.0...
View full details
Save 51%
Save %
The Lumenier AXII DUO Patch Antenna (RHCP). A ultra-high gain, long range, circular polarized receiver antenna. Designed to provide long range 5.8G...
View full details
Save 30%
Save %
Alloy Case For Monster V2 Camera
Save 0%
Save %
Cell Count:3 S Voltage:11.1V Capacity:3300 mAh Discharge:45C Dimention Length:137 mm Dimention Width:42 mm Dimention Height:20 mm Connector:Deans ...
View full details
Save 0%
Save %
Description: Brand Name: FrSky Item Name: PCB Antenna Usage: Suitable for FrSky X8R X6R receiver Features: Easy to install. Can give about 20% rang...
View full details
Save 0%
Save %
1x Hex CAN or I2C bus splitter
Save 0%
Save %
Save 0%
Save %
PLA (Polylactic acid) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources. Print temp :- 190 - 2...
View full details
Save 0%
Save %
M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNS...
View full details
Save 0%
Save %
Save 0%
Save %
High quality flexible pure copper and silicone wire. Specifications Gauge: 12awg Length: 1 meter Ships in 1 meter lengths
Save 0%
Save %
The Flycolor Raptor TR20 Mini Stack features an F722 Flight Controller, equipped with dual VTX and dual LED pads, offering a convenient selecti...
View full details
Save 0%
Save %
RadioMaster - UFL 2.4Ghz T Antenna - 65mm for RP/EP series receivers.A suitable replacement for RP and EP series 2.4ghz Receivers.
Save 0%
Save %
Original RadioMaster SC + SD Switch Assembly Replacement Parts for TX16S TransmitterDescription:Brand Name: RadioMasterItem Name: SC + SD Switch As...
View full details
Save 0%
Save %
INSTALLATION Seperate the top and bottom board of your current Fusion module. (2 x 12pins connector) Install the upgraded board to the top board....
View full details
Save 0%
Save %
Save 0%
Save %
Features: Motor wire protectors to prevent from prop strikes. There are different lengths for our iFlight BNFs: 65mm: F5D and F6D rear Arms Chim...
View full details
Save 0%
Save %
Description:Brand name: FlycolorItem number: FlyDragon Lite Continuous current: 40A Instantaneous current (10s): 50A BEC: 5V/3A Support voltage: 2-...
View full details
Save 0%
Save %
Replacement set of five silicone washers made for use on the Lumenier POPO motors. These washers slide over the motor shaft and act as a spring for...
View full details
Save 0%
Save %
Please select front(Short) or back(long) arm 1x Laser S Arm
Save 0%
Save %
These are the motors the inductrix is supplied with and not the upgraded versions. There are two varieties of motors: Clockwise - Grey plastic end ...
View full details
Save 0%
Save %
FEATURES The Stout bell has the same efficiency as the Silk but with more power Upgraded more powerful magnets giving the overall feel of the motor...
View full details