Discountable

FEATURES High Efficiency Synchronous Step-down regulator Wide 2-8S (6-30V) Operating Input Range Continuous load current: 1.5 Amps (Max....

UBEC DUO 4A/5~12V & 4A/5V This device is a high-efficiency, switch-mode buck regulator with two output channels. It works with 7~26Vdc input. ...

M9N-G4-3100 is based on ArudPilots’ AP_Periph firmware,  It is a GNSS+COMPASS peripheral with CAN/DroneCAN and UART/MSP interfaces. M9N-G4-3100 us...

Power Module PM12S-4A Specifications Wide 9V to 55V Operating Input Range with TVS protection 2x independent Step-Down Voltage Reg...

I2C-INA-BM is an ultra-precise digital power monitor based on TI INA228. The resistance of this conductive path is 200 μΩ typical, providing low p...

Descriptions. This cable conects betweeen any PL-xxx sensor to the Hub X2-V2, or any BEC from from the PL and PC Series.

Larger Pitot Tube Screw mounting with tube Specifications Pitot Tube M3x10 screws 1m Tube

PREORDERS OPEN NOW - Stock arriving 23 April 2019 Set of four arms for the Micro Alien Frame Can use up to a 3" prop with these arms. 

The Micro-Nano Module Adapter is designed to connect modules with a Nano port to the JR/Micro port's Radio transmitter. Notably, it supports the r...

Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every version of the Cube flight controller. With smaller...

Video  cable for DJI o3 air unit

MMCX 90 Deg male to MMCX Straight Male 8cm lead

Features: Motor wire protectors to prevent from prop strikes. There are different lengths for our iFlight BNFs: 65mm: F5D and F6D rear Arms Chim...

JX6 Quick Release Connector Male/Female MPX Connector Model: JX-6Metal material: gold-plated brassPlastic material: PAInstantaneous current: (large...

Specification Weight: 9.5g/pair Type：JX-9 Metal Material: Brass Gold Plated Plastic Material: PA Instantaneous current: (big) 60A/(Small) 7A Rated ...

Brand: Amass (Original Manufacturer) Body Material and Surface Plating: Brass and gold plated Insulation Material: PA66 Original Internal Resista...

Rated voltage: DC500V Rated  current: 30A Peak current: 60A Contact Resistance: 0.50mΩ  Metal material: Brass, gold plated Plastic material: PA...

Connector Type: 3 pin 3.5mm bullet plug. Weight: 9.6g per pair (including sleeves).

Details A set of 2 HQ propellers, 2 blade style with a 6mm center hub. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets ...

This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...

The frame features a traditional look and geometry to maintain the flight characteristics familiar to users, ensuring easy compatibility with the B...

8 x 10mm black nylon hex M3 standoffs

Quality Deans connectors

ORT Micro Vee Linear 5.8GHz Antenna U.FL (5cm Tired of getting mediocre performance from your default antenna AIO micro camera/VTX? Try the ORT Mic...

2s Balance plug PH2 connector with wires

Package Includes:1.   3P2.54mmpitch 100mm cable*12.   6P 1.25mmpitch 150mm cable*23.   4P 1.25mmpitch 150mm cable*14.   Buzzer *15.   Safety switch...

The Pix32 v6 is the latest update to the pix32 v5 flight controllers. It is a variant of the Pixhawk 6C. It is comprised of a separate flight contr...

Package Includes: 1、6 to 6 pin cable 26AWG   L=150mm    N.W=2.2g (power) *2   2、4 to 4 pin cable 26AWG   L=150mm    N.W=1.4g (CAN) *13、6 to 6 pin&a...

Propeller Diameter: 5inch       Pitch : 3.7              Blades : 3Material : Poly Carbonate        Weight :4gHub Diameter :13.3mm           Hub Th...

Description PM02D provides regulated power supply for your Pixhawk® 5X & 6X from the battery,  as well as current consumption and battery volta...

Feature Supports 2-14S & 200A Cont, 400A Burst DroneCAN Communication Protocol Small & Compact Design  Two 5V Output with Independent BEC...