support@flyingrobot.co.za
support@flyingrobot.co.za
Save up to 0%
Save %
4x Aluminum Stack Standoff 4.5mm+6.5mm M3 thread on both male and female ends.
Sold out
Cell Count: 2 S Voltage: 7.4V Capacity: 800 mAh Discharge: 20C Dimention Length: 55 mm Dimention Width: 29 mm Dimention Height: 14 m...
View full details
Sold out
TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and look...
View full details
Save 0%
Save %
Genuine FrSky momentary switch for the Taranis Specs Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 1
Save 0%
Save %
Designed by : Michael Anderson Made by: TBSDesigned to be small, light, and easy to use. You CANNOT expect full range from this antenna. In fact, ...
View full details
Save 4%
Save %
The Raptor Slim is an ultra-narrow single ESC made for racing drones that need all the weight and space savings possible. The Raptor Slim measures ...
View full details
Sold out
This is a set of 8 nylon standoffs, in a hexagonal shape (6mm). Threaded on both ends for a M2 screw.What's included8x nylon 6mm standoffs
Save 0%
Save %
A set of 2x HQ propellers, 2 blade props with 6mm hole. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets of 2 of the same...
View full details
Save 0%
Save %
From the makers of ZEN PLA Ultra, the ZEN Minima range brings sustainability to not only the packaging, but now to the price.The ZEN Team have been...
View full details
Save 0%
Save %
Replacement Antenna for FrSky XM/XM+ RXSR Receiver (10cm) Connector: IPEX4 Length: 10cm Includes 1 X Receiver Antenna
Save 0%
Save %
The RadioMaster RP series of receivers are designed with size, ease of use and range in mind. Utilizing ExpressLRS 2.4ghz Open-source firmware the ...
View full details
Save 0%
Save %
This is a set of 8 aluminum standoffs, with a textured finish (20mm). Threaded on both ends for a M3 screw.What's included8x aluminum 20mm stando...
View full details
Save 0%
Save %
Current Rating : 40AInstantaneous current : 90AContact resistance : 0.30mΩRated voltage : DC 500VFlame retardant rating : UL94 V0Recommended Applic...
View full details
Save up to 0%
Save %
Minimum of 100 sq cm per order. We have 3K carbon sheets available for cutting. Please email us your 2010 DXF files for a quote. Support @ flyin...
View full details
Sold out
With improved signal sensitivity and durability, the Immortal T v2 antenna is the perfect companion for race quads. The centerpiece housing is made...
View full details
Save 0%
Save %
Propeller Diameter: 5.1 inch Pitch : 3.5 Blades : 3Material : Poly Carbonate Weight :3.5gHub Diameter :12.5mm H...
View full details
Sold out
A water-resistant coating designed for RC and electronics components. Easy to apply and durable. Kotking is designed to keep your electronics dr...
View full details
Sold out
A new innovative lighting system from Matek that will make your FPV quad look the business. A choice of 4 LED or 6 LED strips are available and can...
View full details
Save 0%
Save %
Specs:Item: 2S 7.4V 6200mAh LiPo BatteryNominal Voltage: 7.4VCapacity: 6200mAhWatt Hours: 45.88WhConnector: JST-XH and XT30Charge current: Max 2ADi...
View full details
Save 42%
Save %
Charge 4 single-cell lipo batteries at once - with a regular hobby charger. This adapter is made with the finest ingredients and with great attenti...
View full details
Save 0%
Save %
Have you had a bad crash and a prop broke your balance wire? Well worry no more, this cable is used to replace the JST-XH style balance plug on a L...
View full details
Save 0%
Save %
Size: M3 (3mm) Length: 12mm Available colors: Green and PurpleIncludes: 8x M3x12mm screws
(2CW+2CCW) - Poly Carbonate
Sold out
A new diversity receiver for FlySky radios. Tested for extreme reliability and no fail safes. It has been designed from the ground up for the sole ...
View full details