support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
XT30 is the new connector on the block and it is perfect for Mini RC use! Forget about mini JST or Mini T-connectors or even bulky XT60 for smaller...
View full details
Save 0%
Save %
Included: 1 x Red Male 1 x Red Female 1 x Black Male 1 x Black Female
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (25mm). Threaded on both ends for a M2 screw.What's included4x aluminum 25mm standoff...
View full details
Save 0%
Save %
1x Adjustable 4 In 1 Multi Tool - Hex
Sold out
The Gemfan D63 3-blade props are specially designed for the pusher style drone-like Beta95X V3 Whoop Quadcopter and Beta95X V3 HD Digital VTX. It ...
View full details
Save 0%
Save %
Specification:Item Name: 5V Active Alarm Buzzer Beeper TrackerWorking Voltage: 5VQuantity: 5 pcsDimension: 6Pcs 9x5.5mm and 6Pcs 12x9.5mmWeight: 0....
View full details
Save 0%
Save %
FrSKYs S.Port Tool Kit or STK enables configuration of your FrSKY S.Port receiver. The STK has two connecting ports, S.Port 1 (upper) Monitors, rec...
View full details
Sold out
The FrSky S6R 6ch Receiver w/ 3-Axis Stabilisation and Smart Port. Features a built in 3-axis gyro and 3-axis accelerometer sensor for fixed wing. ...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-ILS Quantity: 1Pc Length: approx. 1...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-C1 Quantity: 1Pc Length: approx. 10...
View full details
Save 0%
Save %
2 x CW 2 x CCW 1mm hole Brushless Micro prop30mm diameter
Sold out
The Lumenier Digital RBG Arm LED board is a universal addressible array of RBG LEDs. The board has 4 super bright RBG LEDs installed that can work ...
View full details
Sold out
Description Small size but big power! The iFlight BLITZ Micro Force is the VTX you need for your next Micro build. Small enough to fit into smalle...
View full details
Sold out
With this board you can enable connectivities with your servos via 6ch PWM.SPECIFICATION Weight: 3.24g Size: 27 x 20 x 7mm (With Pins)
Save up to 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (20mm). Threaded on both ends for a M2 screw.What's included4x aluminum 20mm standoff...
View full details
Sold out
2.4g receiver antenna with IPEX 4 Generation connector 5.9 inch (150mm) - Length, RF113 Silver plated Wire Material Precision machining,Low loss ...
View full details
Sold out
The new ToolkitRc M8 is much more than just another charger! With a 400w and 18A Charger at its heart the M8S also has a servo tester, cell check...
View full details
Sold out
Propeller Diameter : 40mm Pitch : 1 Blades : 4Material :Poly Carbonate Weight : 0.5gHub Diameter :5mm ...
View full details
Sold out
Item Name: LCD5802D (with DVR)Built-in 5.8Ghz Dual diversity receiver automatically for best receptionBuilt-in 2CH 5.8Ghz AV output and 1CH AV inpu...
View full details
Save 0%
Save %
Brand: Amass (Original Manufacturer) Body Material and Surface Plating: Brass and gold plated Insulation Material: PA66 Original Internal Resista...
View full details
Save 0%
Save %
Features Wide 9V to 55V Operating Input Range with TVS protection 3x Output voltage options, 5.2V, 8V or 12V. Default 5.2V. Synchronous switchin...
View full details
Save 0%
Save %
Specifications MCU: 168MHz STM32F405RGT6 IMU: ICM42688-P (SPI) Baro: SPL06-001 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD slot (SPI) 6x UARTs, 1x...
View full details
Sold out
The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequen...
View full details
Save 0%
Save %
Features: - Compatible with all USB Type-C powered hardware or cameras (GoPro Hero 5/6/7/8/9, Insta360, etc.)- Stable power supply from any LiPo ...
View full details
Save 0%
Save %
The Archer SR8 PRO are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer, they have 8 high-precision PWM channel...
View full details
Sold out
Never lose or mix up a micro SD card again! Stores up to 10 SD cards in a credit-card sized cradle.Losing track of micro SD cards is always a conce...
View full details
Save 41%
Save %
OCDAY 4 in 1 Multi USB Charge HUB Battery Charger for DJI TELLO UAV The 4-in-1 battery charger is designed for Tello There are 4 interfaces in the ...
View full details
Save 0%
Save %
*IMPORTANT NOTEWe have discovered that XJT mini modules are using a pin that we did not anticipate for use in our module bay. It appears that the X...
View full details
Save 0%
Save %
Package Includes: 3 x 6 to 6 pin cable (power) 2 x 4 to 4 pin cable (CAN) 1 x 6 to 4 pin cable (Data) 2 x 10 to 10 pin cable (PWM) 1 x 8 to 8 pin ...
View full details
Save 0%
Save %
1S 3.7V 2-Pin Battery Cable
Sold out
Size: 5mm (M3) x8 pieces Colour: Black
Save 0%
Save %
NOTE: M4 (4mm) Fits both M7 and M9 Hall Sensor Gimbals Details FrSky CNC machined Aluminum Gimbal Stick Ends for Transmitter Stick with anti-locki...
View full details
Sold out
Tattu R-Line 550mAh 11.1V 95C 3S1P Lipo Battery Pack with XT30 plug has full capacity and discharge rate. It is a high discharge rate FPV racing li...
View full details
Sold out
Tattu R-Line 550mAh 7.4V 95C 2S1P Lipo Battery Pack with XT30 plug has full capacity and discharge rate. It is a high discharge rate FPV racing lip...
View full details
Sold out
RadioMaster - Gimbal LED Mod kit.This is the official RadioMaster gimbal LED mod set. No soldering required, easy plug and play install that will n...
View full details