support@flyingrobot.co.za
support@flyingrobot.co.za
Sold out
This is Crosswind 1900mm V2 platform. In Crosswind V2, the H-stab has been updated to get a better performance while the tail L-R connector is enha...
View full details
Sold out
This BEC is an switching power supply and in series an linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC get's on...
View full details
Sold out
Sold out
Set of four arms for the Micro Alien Frame Can use up to a 3" prop with these arms.
Sold out
Sold out
Video cable for DJI O3 air unit.
Sold out
SERVO SPECIFICATION Torque (kg-cm) 6.0 (4.8V) / 7.5 (6.0V) / 9.2 (7.4V) / 10.2 (8.2V) Torque (oz-in) 83.3 (4.8V) / 104.2 (6.0V) / 127.8...
View full details
Sold out
SERVO SPECIFICATION Torque (kg-cm) 6.0 (4.8V) / 7.5 (6.0V) / 9.2 (7.4V) / 10.2 (8.2V) Torque (oz-in) 83.3 (4.8V) / 104.2 (6.0V) / 127.8 (7...
View full details
Sold out
MMCX to SMA Female Extension cable, various lengths available High temperature and acid corrosion resistant, high-frequency low-loss antenna extens...
View full details
Sold out
About T-MOTOR Navigator MN501-S Multirotor Fixed Wing UAV Motor KV360 T-Motor MN501-S KV360 "Navigator" motor delivers up to 5.2kg thrust, perfect...
View full details
Sold out
About T-MOTOR MN6007 II Multirotor VTOL UAV Motor KV160/KV320 T-Motor Antigravity MN6007II KV160/KV320 is a cutting-edge brushless motor designed ...
View full details
Sold out
Sold out
Spare Parts-X500 V2 Kit
Sold out
Sold out
Finally a purpose built FPV earbud that we have engineered from the ground up to favor sound quality from onboard microphones! We hand-selected th...
View full details
Sold out
[Designed & Assembled in California]mRo AP_Peripheral / CAN Converter / Prototyping module[The product picture denotes the old F103 chip, be as...
View full details
Sold out
[Assembled in California]Updated! Most digital airspeed sensors out there are using I2C signals leveled at 5V, which does not meet the PixHawk stan...
View full details
Sold out
NOTE: Currently shipping Rev "M10070E".The mRo Location One is a multi-constellation GNSS powered by the new uBlox M9N module. This smart device is...
View full details
Sold out
Includes: GPS Installed TBS Nano Crossfire RX
Sold out
SPECIFICATIONS Total Dimensions: 136*190mm (body dimension) Geometry: DeadCat Bottom to top distance: 28mm Arm Thickness: 6mm Bottom plate thick...
View full details
Save up to 0%
Save %
This iFlight BNF Nazgul Evoque F5D V2 HD features the DJI Camera. We also carry the iFlight BNF Nazgul Evoque F5X HD. The new iFlight Nazgul Evoqu...
View full details
Sold out
Specifications 5 mm arms Packing List 2 x Replacement Arms
Sold out
This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...
View full details
Sold out
SPECIFICATIONS: Drone Size: 65mm Flight Controller: BeeBrain BLV4 CRSF build in VTX and Crossfire Receiver Frame: Cockroach65 Brushless Frame (Sol...
View full details
Sold out
SPECIFICATION MCU: STM32F411 GYRO:BMI270 VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8G...
View full details
Sold out
The Caddx Nebula Pro Digital FPV Camera is here! This HD camera measures 19x19mm and only weighs 6g, which is less than the DJI Digital FPV Camera...
View full details
Sold out
Description:- The Battery Charger Intellicharge i2 is a universal, automatic smart-charger compatible with almost all types of rechargeable batteri...
View full details
Sold out
The Intellicharger i4 is a universal, automatic smart-charger compatible with almost all types of rechargeable batteries. 4-Bay Charger. The 4-bay ...
View full details