Products

Wide 9V to 55V Operating Input Range with TVS protection 3x independent Step-Down Voltage Regulators BEC Vx,  5.2V / 6V / 8V output options.  supp...

Specifications 9V to 55V Operating Input Range Vx for servos,  5V, 6V, 8V Adj. Default is 5V. Synchronous switching step-down (buck) regulator w...

FEATURES High Efficiency Synchronous Step-down regulator Wide 2-8S (6-30V) Operating Input Range Continuous load current: 1.5 Amps (Max.2.5A 5s/min...

FEATURES High Efficiency Synchronous Step-down regulator Wide 2-8S (6-30V) Operating Input Range Continuous load current: 1.5 Amps (Max....

UBEC DUO 4A/5~12V & 4A/5V This device is a high-efficiency, switch-mode buck regulator with two output channels. It works with 7~26Vdc input. ...

Descriptions. This cable conects betweeen any PL-xxx sensor to the Hub X2-V2, or any BEC from from the PL and PC Series.

Larger Pitot Tube Screw mounting with tube Specifications Pitot Tube M3x10 screws 1m Tube

PREORDERS OPEN NOW - Stock arriving 23 April 2019 Set of four arms for the Micro Alien Frame Can use up to a 3" prop with these arms. 

These Micro GPS uses multi-constellation GNSS powered by u-blox M10, a concurrent GNSS receiver which can receive and track multiple GNSS systems. ...

Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every version of the Cube flight controller. With smaller...

Video cable for DJI O3 air unit.

MMCX 90 Deg male to MMCX Straight Male 8cm lead

Features: Motor wire protectors to prevent from prop strikes. There are different lengths for our iFlight BNFs: 65mm: F5D and F6D rear Arms Chim...

Brand: Amass (Original Manufacturer) Body Material and Surface Plating: Brass and gold plated Insulation Material: PA66 Original Internal Resista...

Rated voltage: DC500V Rated  current: 30A Peak current: 60A Contact Resistance: 0.50mΩ  Metal material: Brass, gold plated Plastic material: PA...

Connector Type: 3 pin 3.5mm bullet plug. Weight: 9.6g per pair (including sleeves).

Details A set of 2 HQ propellers, 2 blade style with a 6mm center hub. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets ...

This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...

The frame features a traditional look and geometry to maintain the flight characteristics familiar to users, ensuring easy compatibility with the B...

Description:- The Battery Charger Intellicharge i2 is a universal, automatic smart-charger compatible with almost all types of rechargeable batteri...

This is a set of 8 nylon standoffs, in a hexagonal shape (25mm). Threaded on both ends for a M3 screw.What's included8x nylon 25mm standoffs

This is a set of 8 nylon standoffs, in a hexagonal shape (35mm). Threaded on both ends for a M3 screw.What's included8x nylon 35mm standoffs

Quality Deans connectors

Aluminium roll cage for the Obsession frame (x1)

Bottom plates for the V2 Obsession frame (2x)

FPV camera side plates for the Obsession frame (x2)