Products

Features : Crafted from high-quality stainless steel

The MTD10 DIY Digital Multi meter is a completely portable 3 ½ digital multi meter designed for use by a student and hobbyist. Equipped with 8 func...

The MTD80 is a compact True RMS auto ranging multimeter with a 4000 count LCD backlit display. The meter always operates in theSmart mode “AUTO” fu...

Major Tech’s range of punch down tools are simple, fast and accurate. This range of diagonal cutters, long nose pliers and combination pliers come ...

Features : Increases bit life of the soldering iron by up to 10 times 1.0mm Roson coil solder 60 tin /40 led Supplied in handy dispenser

Lightweight, compact and portable! Features : Solder Sucker. Desoldering tool for solder removal. Ideal to remove solder from circuit boards duri...

The set includes the following: 1 x Reverse action (clamps when released) 1 x Needle point 1 x Duck bill needle point 1 x Duck bill flat point F...

Features : Surface Probe Range -50°C – 500°C Very fast response for surface temperature measurement Ideal for Sheet metal, radiators, photocopier ...

  #MAP2 is finally here! The second release of our popular trigger solution is finally here - now with 2 inputs and new features such as Sony QX1 K...

X Power Propellers for Unprecedented Performance Designed for high speed and ultimate performance, the X Power Propeller Series creates a c...

Upgrading your drone has never been easier! Simply swap the props of your DJI Air 2S and within seconds you get up to 4% more flight time and up to...

NEXT GENERATION UPGRADE PROPELLERS for your DJI Mavic 3 and Mavic 3 Cine.  Exceptional quality, low-noise and long flight time operation. Improved...

IMPROVED EFFICIENCY Longer Flight time due to improved propeller efficiency. Get extra flight time per battery to unleash the full potential of t...

Simple propeller swap with the built-in quick-release for Phantom 4 provides a genuine upgrade for a longer flight time and low-noise operation. Ma...

Matek anti-vibration bobbins for Flight Controllers M3 x 7mm + 4.5mm 4pcs

CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware. RM3100 sensor technology provides high re...

The Mateksys CAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware. With this board, you can easily utilize the ArduPilot driver li...

CAN-L4-RC is an Adapter Node based on ArudPilot AP_Periph firmware. Using this adapter to turn Serial receiver into CAN receiver. Specifications ...

CRSF-PWM Converter, CRSF-PWM-6 Compatible with CRSF protocol receiver only Support any CRSF protocol receivers (including 433MHz, 868MHz, 915MHz, ...

The Mateksys Digital Airspeed Sensor ASPD-4525 features a ASPD-4525 sensor board, JST-GH to JST-GH 20cm silicon cable, pitot tube and a clear sili...

The Matek 1.2-1.3Ghz Antenna is one of the most durable and well-made antenna designs on the market today. When you use it we are confident you wi...

Specifications Power dissipation: 45mA(binding), 85mA(wifi mode) RF Frequency: 2.4GHz (2400~2480MHz) Input voltage: 4~9V DC @ 5V pad Receiver pro...

Specifications MCU: 168MHz STM32F405RGT6 IMU: ICM42688-P (SPI) Baro: SPL06-001 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD slot (SPI) 6x UARTs,  1x...

FC Specifications MCU: STM32F405RGT6, 168MHz , 1MB Flash IMU: ICM42688-P Baro: SPL06-001 OSD: AT7456E Blackbox: 16M Flash 5x UARTs,  1x Softserial...

4x Matek FC Anti Vibration Standoffs M2

The new features of F405-mini TE compared with F722-mini SE(EOL) F405 has 1MB flash which can run with ArduPilot.  even with INAV firmware, some ...

M10-5883 uses multi-constellation GNSS powered by u-blox MAX-M10S. MAX-M10S supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and...

M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNS...

M10-L4-3100 is based on ArudPilots’ AP_Periph firmware,  It is a GNSS+COMPASS+BAROMETER peripheral with CAN/DroneCAN and UART/MSP interfaces. M10-...

The Matek H743-SLIM Flight Controller features STM32H743VI, ICM20602 & MPU6000, DPS310, OSD, 7x UARTs, 2x I2C, 1xCAN, 13x PWM outputs, BEC5V an...

Specifications Hall effect current sensor No voltage drop and heat on current sensor components Offset and Sensitivity are calibrated in factory C...

Get the voltage you need with this Matek BEC, convert 6-25V to either 5V, 9V, or 12V. This BEC defaults to 5V, select either 9V or 12V by solderin...

PDB Input voltage range: 6~60V (2~12S LiPo) PDB/current sense resistor: 140A cont, 264A burst. ESC power pads: 60A cont. 100A burst 6x ESC power /s...

Wide 9V to 55V Operating Input Range with TVS protection 3x independent Step-Down Voltage Regulators BEC Vx,  5.2V / 6V / 8V output options.  supp...

Specifications 9V to 55V Operating Input Range Vx for servos,  5V, 6V, 8V Adj. Default is 5V. Synchronous switching step-down (buck) regulator w...