Accessories

4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connect...

This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...

This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...

The frame features a traditional look and geometry to maintain the flight characteristics familiar to users, ensuring easy compatibility with the B...

The newest unbreakable strap from "Swagger-FPV-Shizzle" in cooperation with Team BlackSheep. Size: 240 x 20mm

Made for High Performance Race Copters with 20x20mm Electronic Stacks. This strap is only 16mm wide.

Fat goggle strap so your DJI FPV goggles strap on tight while you teleport to another dimension! The HD version of the Ethix goggle strap is made f...

Source One V5 5inch replacement arms. Includes 2 x 5" spare arms for the SOURCE ONE 5" carbon frame.  6mm Carbon Arms

TX16s MKII Trim switch rockers

TX16s Replacement Satin Black  Switch Nuts Tall

TX16s Replacement Satin Black  Switch Nuts Short

iFlight Replacement DJI FPV Goggles V2 Sponge Foam Padding PRODUCT DESCRIPTION The Replacement DJI FPV Goggles Sponge Foam Padding is a thicker ...

Description: Brand Name: AmassItem Name: XT60+Body Material: Gold-plated copperInternal Material: Nylon/PAInternal Resistance: 0.8mΩMax. RC/MC: 60A...

Included: 1 x Red Male 1 x Red Female 1 x Black Male 1 x Black Female

Includes: 1 x XT90E Male 1 x XT90H Female 2 x Screws 2 x Nuts

The Ethernet Cable design for Herelink v1.1 Air Unit. Cable Length : 15cm

Chimera 7 V2 Spare parts: Upper(middle) plate thickness: 3mm Bottom plate thickness: 3mm Top plate thickness: 2mm Arm Thickness: 6mm

Single input 3ch output Modes: Auto, Center and manual

This kit is for those who want to transfer their Crossfire Nano TX internals to the Micro casing.  INCLUDES 1 x Top Case 1 x Botom Case 1 x JR Bay...

  CubePilot iStand is specifically designed for Here 3, Here 3+ and Here 4 GPS 1 x Stand  1 x comes with screws and Nyloc nuts

SD1 can be used as SBUS decoder to convert SBUS signal for use of a conventional servo (other than use SBUS compatible servo directly) with SBUS s...

XT30/ XT60 Smoke Stopper, Every quad/drone owner should have one.A smoke stopper can help avoid damage when you power on a mini quad drone for the...

Note: Backplates are not included. Specifications Brand: Caddx FPV Size: 20cm Weight: 1.5 g Includes 1 x Caddx Vista Coaxial Cable - 20cm

Note: Backplates are not included. Specifications Brand: Caddx FPV Size: 14cm Weight: 1.5 g Includes 1 x Caddx Vista Coaxial Cable - 14cm

Note: Backplates are not included. Specifications Brand: Caddx FPV Size: 12cm Weight: 1.5 g Includes 1 x Caddx Vista Coaxial Cable - 12cm

FrSky 3 position long switch for Taranis X9E and X9DP SE

Description: Item name: FrSky Neck Strap with Balance Bar for Taranis X9D Plus / SE / 2019  Brand: FrSky Package Included: 1 x FrSky Neck Strap ...

Descriptions. This cable conects betweeen any PL-xxx sensor to the Hub X2-V2, or any BEC from from the PL and PC Series.

IDS (Integrated Drive System) Servo Tray for FrSky Xact 5601/5602/5611/5612Robust Push Rod Set  Different Rod Lengths  Different Sizes of Arm Linka...

FrSky Transmitter Stand for Taranis X9D X9DP X9DPSE X7 X7SDescription: Brand: FrSky Item Name: FrSky Transmitter Stand Package Included:1 x FrSky T...

This product is a tool for setting the channel to FrSky SBUS & CPPM compatible servo (e.g. D12MB), FrSky SBUS decoder and Futaba SBUS compatibl...

Introducing the Ethix Build Mat, this is something Mr Steele, Konasty, and SweepwingsRC of the “Team Failsafe Podcast” have been teasing about for ...

With this board you can enable connectivities with your servos via 6ch PWM.SPECIFICATION Weight: 3.24g Size: 27 x 20 x 7mm (With Pins)

The updated version of the HD Ethix goggle strap is specific designed for the DJI FPV goggles v1/v2. This mild redesign features a smaller battery...

This is a set of 4 aluminum standoffs, with a textured finish (30mm). Threaded on both ends for a M2 screw.What's included4x aluminum 30mm standoff...

This is a set of 4 aluminum standoffs, with a textured finish (25mm). Threaded on both ends for a M2 screw.What's included4x aluminum 25mm standoff...

This is a set of 4 aluminum standoffs, with a textured finish (23mm). Threaded on both ends for a M2 screw.What's included4x aluminum 23mm standoff...

This is a set of 4 aluminum standoffs, with a textured finish (20mm). Threaded on both ends for a M2 screw.What's included4x aluminum 20mm standoff...

This is a set of 4 aluminum standoffs, with a textured finish (15mm). Threaded on both ends for a M2 screw.What's included4x aluminum 15mm standoff...

1x Adjustable 4 In 1 Multi Tool - Hex

Overview Protects the propellers and other objects from damage. Light and easy to install and detach. In The Box DJI FPV Propeller Guard (Set) ×1...

Helps Removes Props.