support@flyingrobot.co.za
support@flyingrobot.co.za
Sold out
Tension springs for the RadioMaster TX16S gimbals
Sold out
Cables for accessories are JST to DF13 cables which are compatible with old pixhawk accessories, such as Telemetry, Power Brick or GPS It contai...
View full details
Sold out
The FrSky RB –20 is a switchboard module that can operate 2 receivers and 2 batteries to provide you with total peace of mind when flying your mode...
View full details
Save 0%
Save %
Choose Large or Small and add a max of 1 of each size per order to your shopping cart and we'll pack it in the box.
Sold out
Never lose or mix up a micro SD card again! Stores up to 10 SD cards in a credit-card sized cradle.Losing track of micro SD cards is always a conce...
View full details
Sold out
Bullet point BEC Board is specially designed for Naked GoPro HERO6/7/8 which weighs about 1.5g, makes your naked GoPro lighter and easy to install ...
View full details
Sold out
1x 2s JST-XH Balance Lead Replacement Cable
Sold out
The HDO Sticker kit includes:2 pieces stickers for the top of the goggles.Great for when you have customised, sprayed or dipped your goggles.
Sold out
Lumenier's orignal RGB LED Tail Light was a step forward towards making LEDs more functional and accessible to the FPV consumer. This new LED Tail/...
View full details
Sold out
Do you still struggle to keep the battery in your holder? Don't want to risk a couple 18650 batteries going off near the temple of your head? Tired...
View full details
Sold out
When storing your tools is not just about utility but also about style, you've found a perfect match in the ETHIX Tool Case. With soft suede / alc...
View full details
Sold out
FrSky Antenna for RX8R PROSpecification: size: 148mm connector: IPEX 1 connector Package Included:1 x FrSky RX8R PRO Antenna
Sold out
The EasyLight is a no fuss no wires flashing LED light that is self-contained with its own internal battery. These LED strobes are perfect for comm...
View full details
Sold out
INCLUDES~60pcs - 1.0mm - 38mm Red~60pcs - 1.5mm - 38mm Black~50pcs - 2.0mm - 38mm Yellow~50pcs - 2.0mm - 38mm Black~50pcs - 2.5mm - 38mm Red~50pcs ...
View full details
Sold out
Within this boxy box there is many spools of the most important types of multi-stranded wire that one might ever be in need of. We here at Ethix h...
View full details
Sold out
The FrSky S.BUS to PWM Decoder allows you to use any standard analogue or digital servos with your S.BUS compatible receiver. This eliminates the n...
View full details
Sold out
If you are looking for an easy way to add some bling to your quadcopter drone, then the Matek 2812 LED controller is an ideal option. for a number...
View full details
Sold out
A new innovative lighting system from Matek that will make your FPV quad look the business. A choice of 4 LED or 6 LED strips are available and can...
View full details
Sold out
1x 5s Balance Lead
Sold out
The Lumenier Digital RBG Arm LED board is a universal addressible array of RBG LEDs. The board has 4 super bright RBG LEDs installed that can work ...
View full details
Sold out
Channel: 10(IBUS), 8(PPM) RF Range: 2.408-2.475GHZ RX Sensitivity: -92dBm 2.4GHz protocol: AFHDS 2A Signal output: IBUS / PPM (Failsafe only work...
View full details
Sold out
FrSky M9-R Gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis X9D/X9D Plu...
View full details
Sold out
The FrSky Variometer sensor calculates the altitude from atmospheric pressure. Atmospheric pressure will get lower as you go up in altitude, using ...
View full details
Sold out
Description: Color: WhiteType: 2S, 3S, 4S, 5S, 6SSize: 20mm * 22.5mm * 8mm (MAX)Weight: about 3 gramsMaterial: Polypropylene (PP)Max temperature: 1...
View full details
Sold out
Finally a purpose built FPV earbud that we have engineered from the ground up to favor sound quality from onboard microphones! We hand-selected th...
View full details
Sold out
The RCY connector is a compact, 2.5mm (.098″) pitch wire-to-wire connector for use with a variety of circuits, from signal circuits to power supply...
View full details
Sold out
This is a set of 8 nylon standoffs, in a hexagonal shape (6mm). Threaded on both ends for a M2 screw.What's included8x nylon 6mm standoffs
Sold out
Size: 5mm (M3) x8 pieces Colour: Black
Sold out
NOTE: M3 (3mm) Only fits stock Taranis QX7 and X9D gimbals Details FrSky CNC machined Aluminum Gimbal Stick Ends for Transmitter Stick with anti-l...
View full details
Sold out
2.1mm barrel to Banana style adapter for Fat Shark batteries.
Sold out
NOTE: M4 (4mm) Fits both M7 and M9 Hall Sensor Gimbals Details FrSky CNC machined Aluminum Gimbal Stick Ends for Transmitter Stick with anti-locki...
View full details
Sold out
3X6 BUTTON HD SOCKET CAP SCREWS - ISO 7380 A2 ST/ ST
Sold out
Description 8pcs) pack of Stainless Steel button head hex screws. M3 Screw 10MM Length
Sold out
Description 8pcs) pack of Stainless Steel button head hex screws. M3 Screw 12MM Length
Sold out
M5 aluminium CW / Right Hand / Normal Loc Nuts with flange Pack of 4 Individual anodized aluminum M5 flanged nylon lock nuts. Includes 4x M5...
View full details
Sold out
This is a set of 8 aluminum standoffs (10mm). Threaded on both ends for a M3 screw. What's included8x aluminum 10mm standoffs Available in Blac...
View full details
Sold out
1x JR servo lead 22AWG male to male 10 cm
Sold out
1 x RP-SMA Female to RP-SMA male 10cm RF Adapter Pig Tail The perfect way extend your ant from your vtx and securely mount the antenna to your qua...
View full details
Sold out
1 x SMA Male to RP-SMA Female straight RF Adapter Connector Perfect for using an ImmersionRC vtx antenna with a Boscam ant.
Sold out
1 x RP-SMA Male to SMA Female 90 degree Adapter Perfect for using an ImmersionRC Spironet sma antenna with a Boscam transmitter.