support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
SPECIFICATION Propeller Diameter: 5 inch Pitch: 3.1 Blades: 3 Material: Poly Carbonate Weight: 3.6g Hub Diameter: 12.5mm Hub Thickness: 6mm Shaft...
View full details
Save 0%
Save %
Connection Cable KISS FC / FC V2-> 24A PDB KISS FC / FC V2-> 25A 4in1 ESC Connection Cable to connect the KISS FC / FC V2 to the KISS Carri...
View full details
Save 0%
Save %
1x 6s Balance lead extention 10cm in length Male and Female JST-XH Connectors
Save 30%
Save %
Save 0%
Save %
M5 aluminium CW / Right Hand / Normal Loc Nuts Pack of 4 Individual anodized aluminum M5 nylon lock nuts. Includes 4x M5 Aluminum CW Nylock Nut ...
View full details
Save 0%
Save %
This is a replacement soldering iron tip for the TS100 Digital OLED Mini Soldering Iron. Specifications Material: Ceramic + Steel Type: TS-C4 Leng...
View full details
Save 0%
Save %
This is a replacement soldering iron tip for the TS100 Digital OLED Mini Soldering Iron. Specifications Material: Ceramic + Steel Type: TS-B2 Leng...
View full details
Save 30%
Save %
This filter improves video reception for 1.2-1.3GHz video receivers in combination with TBS Crossfire. Due to the poor filtering on the video anten...
View full details
Save 31%
Save %
This plastic canopy is still low enough to look down between the ducts to drop thru small slots or gaps. Holds the camera securely and eliminates ...
View full details
Save 0%
Save %
Package Includes: 3 x 6 to 6 pin cable (power) 2 x 4 to 4 pin cable (CAN) 1 x 6 to 4 pin cable (Data) 2 x 10 to 10 pin cable (PWM) 1 x 8 to 8 pin ...
View full details45°throttle travel for quick throttle response Hall sensor 4 ball-bearings Adjustable tension Ideal for FPV RACING, 3D and acrobatic fixed wing, 3...
View full details
Save 0%
Save %
1x JR servo lead 22AWG male to female 90cm
Save 0%
Save %
1x JR servo lead 22AWG male to female 60cm
Save 0%
Save %
1x JR servo lead 22AWG male to female 45cm
Save 0%
Save %
Replacement set of five silicone washers made for use on the Lumenier POPO motors. These washers slide over the motor shaft and act as a spring for...
View full details
Save 0%
Save %
Rubber dampner for FC (4pcs) M3
Save 0%
Save %
4x Matek FC Anti Vibration Standoffs M2
Save 0%
Save %
High quality flexible pure copper and silicone wire. Specifications Gauge: 12awg Length: 1 meter Ships in 1 meter lengths of both Red & Bl...
View full details
Save 0%
Save %
Race Wire is the perfect upgrade for your racing or freestyle rig. It simply replaces a section of your motor wires under the tips of the propelle...
View full details
Save 0%
Save %
Craft Knife with snap-off blade
Save 0%
Save %
XT30 +4mm Banana charge cable 150mm
Save 0%
Save %
This is a set of 8 aluminum standoffs (30mm). Threaded on both ends for a M3 screw. What's included 8x aluminum 30mm standoffs Available in Bl...
View full details
Save 0%
Save %
8x M3 4mm screws
Save 0%
Save %
8x M3 10mm screws
Save 0%
Save %
M3 aluminium flanged lock-nuts - pack of 4 Individual anodized aluminum M3 flanged nylon lock nuts. Includes 4x M3 Aluminum Nylock Nut w/ Flange ...
View full details
Save 0%
Save %
This is a set of 8 aluminum tapered standoffs (28mm). Threaded on both ends for a M3 screw.What's included8x aluminum 28mm standoffsAvailable in Bl...
View full details
Save 0%
Save %
This is a set of 8 aluminum standoffs, tapered, and with a textured finish (20mm). Threaded on both ends for a M3 screw.What's included8x aluminu...
View full details
Save 0%
Save %
NOTE: M4 (4mm) Fits both M7 and M9 Hall Sensor Gimbals Details FrSky CNC machined Aluminum Gimbal Stick Ends for Transmitter Stick with anti-locki...
View full details
Save 30%
Save %
Alloy case for Foxeer HS1177 V2 camera
Save 30%
Save %
Alloy Case For Monster V2 Camera
Save 30%
Save %
Replacement metal case for Foxeer Arrow V3 FPV camera
Save 30%
Save %
This board allows a TBS Unify Pro (5V or HV/Race) and receiver to be mounted in a stack for a low profile and clean solution. The pads let you to ...
View full details
Save 0%
Save %
Matek anti-vibration bobbins for Flight Controllers M3 x 7mm + 4.5mm 4pcs
Save 29%
Save %
Replacement canopy for the DYS ELF micro drone.
Save 0%
Save %
Description 8pcs pack of Stainless Steel button head hex screws. M3 Screw 20MM Length
Save 0%
Save %
This is a set of 8 aluminum standoffs, tapered, and with a textured finish (25mm). Threaded on both ends for a M3 screw.What's included8x aluminu...
View full details
Save up to 0%
Save %
This is a set of 8 aluminum tapered and textured standoffs (35mm). Threaded on both ends for a M3 screw. What's included8x aluminum 35mm standoffs...
View full details
Save 0%
Save %
Size: M3 (3mm) Length: 16mm Available colors: Green, Red and Purple Includes: 8x M3x12mm screws
Save 0%
Save %
Size: M3 (3mm) Length: 12mm Available colors: Green and PurpleIncludes: 8x M3x12mm screws
Save up to 0%
Save %
Dimensions are as follows: Outer Diameter: 8mm Inner Diameter: 3mm Overall Height: 2mm Countersink Diameter: 5.5mm
Save 0%
Save %
This is a set of 8 nylon standoffs, in a hexagonal shape (35mm). Threaded on both ends for a M3 screw.What's included8x nylon 35mm standoffs
Save up to 0%
Save %
This is a set of 8 aluminum standoffs, with a textured finish (35mm). Threaded on both ends for a M3 screw.What's included8x aluminum 35mm stando...
View full details
Save 0%
Save %
This is a set of 8 aluminum standoffs, with a textured finish (25mm). Threaded on both ends for a M3 screw. What's included 8x aluminum 25mm s...
View full details
Save 0%
Save %
M5 aluminium CCW / Left Hand / Reverse Low Profile Loc Nuts with flange Pack of 4 Individual anodized aluminum M5 flanged nylon lock nuts. I...
View full details
Save 0%
Save %
M5 aluminium CW / Right Hand / Normal Low Profile Loc Nuts with flangePack of 4 Individual anodized aluminum M5 flanged nylon lock nuts. Incl...
View full details
Save 0%
Save %
M5 aluminium CCW / Left Hand / Reverse Loc Nuts with flange Pack of 4 Individual anodized aluminum M5 flanged nylon lock nuts. Includes 4x M...
View full details
Save 0%
Save %
FrSky replacement receiver antenna 150 mm These have the larger connector and only compatible with the D4R-II and older X4RSB receivers. Note: Fr...
View full details
Save 0%
Save %
This damping ball lock is used to prevent the damping balls from falling out especially when there comes the crash, the violent vibration or the ha...
View full details