support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
The Ethernet Cable design for Herelink v1.1 Air Unit. Cable Length : 15cm
Save up to 0%
Save %
Chimera 7 V2 Spare parts: Upper(middle) plate thickness: 3mm Bottom plate thickness: 3mm Top plate thickness: 2mm Arm Thickness: 6mm
Save up to 0%
Save %
Save 0%
Save %
CubePilot iStand is specifically designed for Here 3, Here 3+ and Here 4 GPS 1 x Stand 1 x comes with screws and Nyloc nuts
Save 0%
Save %
XT30/ XT60 Smoke Stopper, Every quad/drone owner should have one.A smoke stopper can help avoid damage when you power on a mini quad drone for the...
View full details
Save 0%
Save %
FrSky 3 position long switch for Taranis X9E and X9DP SE
Save 0%
Save %
Descriptions. This cable conects betweeen any PL-xxx sensor to the Hub X2-V2, or any BEC from from the PL and PC Series.
Save 0%
Save %
IDS (Integrated Drive System) Servo Tray for FrSky Xact 5601/5602/5611/5612Robust Push Rod Set Different Rod Lengths Different Sizes of Arm Linka...
View full details
Save 0%
Save %
FrSky Transmitter Stand for Taranis X9D X9DP X9DPSE X7 X7SDescription: Brand: FrSky Item Name: FrSky Transmitter Stand Package Included:1 x FrSky T...
View full details
Save up to 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (30mm). Threaded on both ends for a M2 screw.What's included4x aluminum 30mm standoff...
View full details
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (25mm). Threaded on both ends for a M2 screw.What's included4x aluminum 25mm standoff...
View full details
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (23mm). Threaded on both ends for a M2 screw.What's included4x aluminum 23mm standoff...
View full details
Save up to 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (20mm). Threaded on both ends for a M2 screw.What's included4x aluminum 20mm standoff...
View full details
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (15mm). Threaded on both ends for a M2 screw.What's included4x aluminum 15mm standoff...
View full details
Save 0%
Save %
1x Adjustable 4 In 1 Multi Tool - Hex
Save 0%
Save %
Replacement cable for the data port on the TBS Unify Pro Evo video transmitter.
Save 0%
Save %
1x Hex CAN or I2C bus splitter
Save 0%
Save %
Very strong 3M adhesive, durable, perfect for holding battery's for drones. But can really be used to hold anything in place. Sold in one single ...
View full details
Save 0%
Save %
Specification:Item Name: 5V Active Alarm Buzzer Beeper TrackerWorking Voltage: 5VQuantity: 5 pcsDimension: 6Pcs 9x5.5mm and 6Pcs 12x9.5mmWeight: 0....
View full details
Save 0%
Save %
Details Upgrade your Taranis Q X7 with this plug-n-play high resolution M7 Gimbal from FrSky. The highly sensitive Hall sensors will not wear out ...
View full details
Save 0%
Save %
FrSKYs S.Port Tool Kit or STK enables configuration of your FrSKY S.Port receiver. The STK has two connecting ports, S.Port 1 (upper) Monitors, rec...
View full details
Save 0%
Save %
6 Position Switch
Save 0%
Save %
This is a set of 8 aluminum standoffs (25mm). Threaded on both ends for a M3 screw. What's included8x aluminum 25mm standoffs Available in Blac...
View full details
Save 0%
Save %
Have you had a bad crash and a prop broke your balance wire? Well worry no more, this cable is used to replace the JST-XH style balance plug on a L...
View full details