support@flyingrobot.co.za
support@flyingrobot.co.za
Save 29%
Save %
Replacement canopy for the DYS ELF micro drone.
Save 0%
Save %
4in1 Blheli_S, Dshot F10A
Save 0%
Save %
5.8GHz, 40CH, 25mW
Save 0%
Save %
Description 8pcs pack of Stainless Steel button head hex screws. M3 Screw 20MM Length
Sold out
3X6 BUTTON HD SOCKET CAP SCREWS - ISO 7380 A2 ST/ ST
Save 0%
Save %
Aluminium roll cage for the Obsession frame (x1)
Save 0%
Save %
FPV camera side plates for the Obsession frame (x2)
Save 0%
Save %
Details One replacement side wall for the QAV-R, QAV180, and QAV210 made of 3k carbon fiber. Compatibility QAV-R QAV180 QAV210 Specifications ...
View full details
Save 0%
Save %
Details The replacement flight camera plate for the QAV-R, QAV180 and QAV210 made of 3k carbon fiber. Compatibility QAV-R QAV180 QAV210 Specific...
View full details
Save 31%
Save %
Foxeer TM25 Switcher breakout Cable
Allow for 1-2 days wait as mounts are printed GoPro Session/RunCam3 30 degree mount. 3D printed right here in the Flying Robot factory from flexibl...
View full details
Save 30%
Save %
Foxeer Legend 2 Lens
Save 30%
Save %
Foxeer Legend 2 Lens and Lens Module
Save 0%
Save %
TRUE DIVERSITY, FULL RANGE The TBS CROSSFIRE 8ch Diversity Receiver is a compact R/C receiver with 8ch PWM outputs (PPM, SBUS and CRSF capable), w...
View full details
Save 0%
Save %
Standard pigtail that comes with each TBS UNIFY PRO 5G8 HV.
Save 0%
Save %
UBEC DUO 4A/5~12V & 4A/5V This device is a high-efficiency, switch-mode buck regulator with two output channels. It works with 7~26Vdc input. ...
View full details
Sold out
Very small, lightweight, minimal, yet highly functional! The FRSKY XM+ SBUS Receiver is perfect for FPV racing. It has as good of range as ...
View full details
Sold out
A replacement trim switch for the FrSky X9D Transmitter.
Save 0%
Save %
This is a replacement 2.4GHz antenna for the FrSky XSR receiver. Requires soldering to replace.
Save 0%
Save %
Connector: IPEX4 Compatible receivers: X4R / X4RSB / S6R / RXSR / XM / XM+ Length: 150mm Includes 1 X Receiver Antenna
Save 58%
Save %
Spare parts for the QX90 Microquad frame. Included: 4 x Motor grommets 1 x Buzzer 1 x Power Cable 6 x Nylon standoffs 1 x Upper Board 1 x Pack of ...
View full details
Save 0%
Save %
This is a set of 8 aluminum standoffs, tapered, and with a textured finish (25mm). Threaded on both ends for a M3 screw.What's included8x aluminu...
View full details
Save up to 0%
Save %
This is a set of 8 aluminum tapered and textured standoffs (35mm). Threaded on both ends for a M3 screw. What's included8x aluminum 35mm standoffs...
View full details
Sold out
M3 textured thumb screw Specs- Type : Thumb Knob- Material : Aluminum Alloy- Thread size : M3- Length : 7mm- Quantity : 8pcs in one bag
Save 0%
Save %
Description The PowerWhoop Connector is here! These connectors are far superior to the current standard (Micro JST) and are easy to solder on. The...
View full details
Save 0%
Save %
Description 8pcs) pack of Stainless Steel button head hex screws. M3 Screw 10MM Length
Save 0%
Save %
1S 3.7V 2-Pin Battery Cable
Sold out
Description 8pcs) pack of Stainless Steel button head hex screws. M3 Screw 12MM Length
Save 42%
Save %
This Set of leads makes charging 4 1s batteries possible using a conventional smart charger. More flying in less time. Go on, you know you want it.
Save 0%
Save %
2s Balance plug PH2 connector with wires
Sold out
Description:Item: Balance Extension CablePlug: Male to Female Standard XH2.54Silicone Wire:20AWGHeat resistance:200°(100 x 0.88mm copper wire insid...
View full details
Save 0%
Save %
Balance lead extension to fit chargers that charge up to 4s lipos.
Sold out
Description 3X8 BUTTON HD SOCKET CAP SCREWS - ISO 7380 A2 ST/ ST
Sold out
Specifications: Speed: 14,000KvOperating Voltage: 1.5-3.7VMax. Thrust: 15g Load Current at 3.7V: 2.0ADimensions:Diameter: 6mmLength: 15mmShaft Dia...
View full details
Save 29%
Save %
Standard ZMR250 front or FPV Carbon camera mounting plate.
Sold out
This is the SKYRC E3 Li-Po Charger, it takes 100-240V, good for any country in the world. There are no buttons on the charger, so simply wait the c...
View full details
Sold out
A NEW ERA OF CONNECTIVITY The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communica...
View full details
Sold out
Genuine FrSky 3 way switch for the Taranis -long Specs: Weight: 4.5gDimensions: 12.7 x 7 x 43mmSwitch Positions: 3
Sold out
Genuine FrSky 3 way switch for the Taranis - short Specs: Weight: 4.5gDimensions: 12.7 x 7 x 34mmSwitch Positions: 3
Sold out
Genuine FrSky 2 way switch for the Taranis-long Specs: Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 2
Save 0%
Save %
Genuine FrSky momentary switch for the Taranis Specs Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 1
Sold out
Brand FrSky Model Taranis X9D Plus - Module Cover colour Black
Save 0%
Save %
Size: M3 (3mm) Length: 16mm Available colors: Green, Red and Purple Includes: 8x M3x12mm screws
Save 0%
Save %
Size: M3 (3mm) Length: 12mm Available colors: Green and PurpleIncludes: 8x M3x12mm screws
Save up to 0%
Save %
Dimensions are as follows: Outer Diameter: 8mm Inner Diameter: 3mm Overall Height: 2mm Countersink Diameter: 5.5mm
Save 0%
Save %
These cables will give you more juice to your whoop! According to micro motor godfather Benedikt at Micro Motor Warehouse the stock battery pigtai...
View full details
Sold out
FS - X6B is a 6-channel two-way receiver designed for multirotors. It uses the AFHDS 2A ( Automatic Frequency Hopping Digital System ) protocol and...
View full details
Save 0%
Save %
This is a set of 8 nylon standoffs, in a hexagonal shape (35mm). Threaded on both ends for a M3 screw.What's included8x nylon 35mm standoffs