support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
(2CW+2CCW) - Poly Carbonate
Save 0%
Save %
The Nano-Nano board was designed to allow you to mount your Team BlackSheep Unify Pro Nano VTX in your stack for cleaner builds. This board includ...
View full details
Save 0%
Save %
Check out these TBS x Tinywhoop Race Props, they are absolutely aweosme to fly with. Quad blades to ensure grippy cornering and the fat blades for ...
View full details
Save 0%
Save %
TBS Vendetta LED board. Programmable through Cleanflight. The power of the entire visible colour spectrum in your hands! INCLUDES 1x Spare LED Boa...
View full details
Save 0%
Save %
BlackSheep Telemetry cable to connect a wide variety of peripherals. 10cm length.
Save 0%
Save %
This hoodie from ETHiX is designed to keep you warm on the coldest flying day, looking sharp on the street and all at a bargain price compared to ...
View full details
Sold out
Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard" :) ) down to a bare minimum for FPV racing, at ...
View full details
Save 0%
Save %
A linear antenna with MMCX connector. SPECS Weight: 1.8grams Length: approximately 102mm (include shrink tube) Width: 1.79mm
Sold out
Sold out
Finally a purpose built FPV earbud that we have engineered from the ground up to favor sound quality from onboard microphones! We hand-selected th...
View full details
Sold out
SPEKTRUM DSMX QUAD RACE SERIAL RECEIVER WITH TELEMETRY (SPM4649T) The SPM4649T quad racing serial receiver offers full-range performance with inte...
View full details
Sold out
A new diversity receiver for FlySky radios. Tested for extreme reliability and no fail safes. It has been designed from the ground up for the sole ...
View full details
Sold out
Gemfan Flash 2.5inch props These are great 2.5" props. Perfect for a brushless micro like the BabkyhawkR
Sold out
WANT PROOF? WE TOLD YA DYNAMITE COMES IN SMALL PACKAGES! Gemfan is back at it again! Now for the lover of all things micro. The new tough as nails ...
View full details
Sold out
TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering exp...
View full details
Save 0%
Save %
• Longer Flight Time• 100% Balance • Higher Loaded Ability• Lightweight / High-strength
Sold out
The RCY connector is a compact, 2.5mm (.098″) pitch wire-to-wire connector for use with a variety of circuits, from signal circuits to power supply...
View full details
Sold out
High quality flexible pure copper and silicone wire. Specifications Gauge: 12awg Length: 1 meter Ships in 1 meter lengths of both Red & Bl...
View full details
Save 0%
Save %
Race Wire is the perfect upgrade for your racing or freestyle rig. It simply replaces a section of your motor wires under the tips of the propelle...
View full details
Save 0%
Save %
Craft Knife with snap-off blade
Shaft for Tmotor F40 II, F40 III and F40 PRO (2 units)
Sold out
This is a set of 8 nylon standoffs, in a hexagonal shape (6mm). Threaded on both ends for a M2 screw.What's included8x nylon 6mm standoffs
Sold out
XT30 +4mm Banana charge cable 150mm
Sold out
XT60 Male 10 cm Pigtail (Black)
Sold out
This is the power switch module as used in the Taranis Plus, it will not work in the normal Taranis. Includes the NiMH 2000 mAh charge circuit.
Save 0%
Save %
Upgrade Taranis Loudspeaker for Frsky Q X7 / X9D / X9D Plus and X9DP SE Radio Transmitter - Q X7.
Save 0%
Save %
Frsky Taranis Q X7 Transmitter Parts Replacement Potentiometer Without Center Scale & With Center Scale Description: Brand: Frsky Item Name:...
View full details
Save 0%
Save %
Frsky Taranis Q X7 Transmitter Parts Replacement Power Switch Board Description: Brand: Frsky Item Name: Frsky Taranis Q X7 Transmitter Power Swit...
View full details
Sold out
Standard replacement gimbal for Q-X7 radio
Save 0%
Save %
Frsky Taranis Q X7 Transmitter Parts Replacement Haptic Parts Description: Brand: Frsky Item Name: Frsky Taranis Q X7 Transmitter Haptic Parts Pa...
View full details
Save 0%
Save %
Select either the 3 piece left side or the rotary right side from the drop down menu.
Save up to 0%
Save %
Select either Black or White from the drop down menu
Save 0%
Save %
Size: 10mm Colour: Black
Save 0%
Save %
One carbon fiber arm, for those wanting to experiment with different motors.
Save 0%
Save %
Spare top plate for the Reverb FPV frame
Save 0%
Save %
Spare lower split main plate for the Reverb FPV frame
Sold out
Foam lipo pad - conforms to Reverb top plate 4mm thick to protect the lipo from screw heads.
Save 0%
Save %
Helix ZX5 Arm Set - (4 Pack)
Save 0%
Save %
SkyRC PC1080 is a dual channel 6S LiPo charger for industrial application drones. It is reliable, safe and easy to operate while with comprehens...
View full details
Sold out
Size: 5mm (M3) x8 pieces Colour: Black
Save 0%
Save %
This is a set of 8 aluminum standoffs (30mm). Threaded on both ends for a M3 screw. What's included 8x aluminum 30mm standoffs Available in Bl...
View full details
Save 0%
Save %
Mount for a GPS Antenna.
Sold out
The HQ V1S prop has proven to be very popular among the elite drone racing pilots. Now the more punchy and thrusty 5.0 pitch version has been rele...
View full details
Save 0%
Save %
FrSky Taranis QX7 Transmitter LCD screen
Save 0%
Save %
FrSky’s L9R receiver features 12 available channels (9 via normal PWM outputs and all 12 channels on the dedicated Sbus output). What really makes ...
View full details
Save 0%
Save %
Output Voltage: 5V@3A or 6V@3A (Selectable by using a jumper connector)Continuous output current: 3 AmpsInput: 5.5V-26V (2-6S Lipo or 5-18 cells N...
View full details