support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
Standard pigtail that comes with each TBS UNIFY PRO 5G8 HV.
Save 0%
Save %
UBEC DUO 4A/5~12V & 4A/5V This device is a high-efficiency, switch-mode buck regulator with two output channels. It works with 7~26Vdc input. ...
View full details
Sold out
Very small, lightweight, minimal, yet highly functional! The FRSKY XM+ SBUS Receiver is perfect for FPV racing. It has as good of range as ...
View full details
Save 0%
Save %
A replacement trim switch for the FrSky X9D Transmitter.
Save 0%
Save %
This is a replacement 2.4GHz antenna for the FrSky XSR receiver. Requires soldering to replace.
Save 0%
Save %
Connector: IPEX4 Compatible receivers: X4R / X4RSB / S6R / RXSR / XM / XM+ Length: 150mm Includes 1 X Receiver Antenna
Save 58%
Save %
Spare parts for the QX90 Microquad frame. Included: 4 x Motor grommets 1 x Buzzer 1 x Power Cable 6 x Nylon standoffs 1 x Upper Board 1 x Pack of ...
View full details
Save 0%
Save %
This is a set of 8 aluminum standoffs, tapered, and with a textured finish (25mm). Threaded on both ends for a M3 screw.What's included8x aluminu...
View full details
Save up to 0%
Save %
This is a set of 8 aluminum tapered and textured standoffs (35mm). Threaded on both ends for a M3 screw. What's included8x aluminum 35mm standoffs...
View full details
Sold out
M3 textured thumb screw Specs- Type : Thumb Knob- Material : Aluminum Alloy- Thread size : M3- Length : 7mm- Quantity : 8pcs in one bag
Save 0%
Save %
Description The PowerWhoop Connector is here! These connectors are far superior to the current standard (Micro JST) and are easy to solder on. The...
View full details
Sold out
Description 8pcs) pack of Stainless Steel button head hex screws. M3 Screw 10MM Length
Save 0%
Save %
1S 3.7V 2-Pin Battery Cable
Sold out
Description 8pcs) pack of Stainless Steel button head hex screws. M3 Screw 12MM Length
Save 42%
Save %
This Set of leads makes charging 4 1s batteries possible using a conventional smart charger. More flying in less time. Go on, you know you want it.
Save 0%
Save %
2s Balance plug PH2 connector with wires
Sold out
Description:Item: Balance Extension CablePlug: Male to Female Standard XH2.54Silicone Wire:20AWGHeat resistance:200°(100 x 0.88mm copper wire insid...
View full details
Save 0%
Save %
Balance lead extension to fit chargers that charge up to 4s lipos.
Sold out
Description 3X8 BUTTON HD SOCKET CAP SCREWS - ISO 7380 A2 ST/ ST
Save 0%
Save %
Specifications: Speed: 14,000KvOperating Voltage: 1.5-3.7VMax. Thrust: 15g Load Current at 3.7V: 2.0ADimensions:Diameter: 6mmLength: 15mmShaft Dia...
View full details
Save 29%
Save %
Standard ZMR250 front or FPV Carbon camera mounting plate.
Sold out
This is the SKYRC E3 Li-Po Charger, it takes 100-240V, good for any country in the world. There are no buttons on the charger, so simply wait the c...
View full details
Sold out
A NEW ERA OF CONNECTIVITY The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communica...
View full details
Save 0%
Save %
Genuine FrSky 3 way switch for the Taranis -long Specs: Weight: 4.5gDimensions: 12.7 x 7 x 43mmSwitch Positions: 3
Save 0%
Save %
Genuine FrSky 3 way switch for the Taranis - short Specs: Weight: 4.5gDimensions: 12.7 x 7 x 34mmSwitch Positions: 3
Save 0%
Save %
Genuine FrSky 2 way switch for the Taranis-long Specs: Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 2
Save 0%
Save %
Genuine FrSky momentary switch for the Taranis Specs Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 1
Sold out
Brand FrSky Model Taranis X9D Plus - Module Cover colour Black
Save 0%
Save %
Size: M3 (3mm) Length: 16mm Available colors: Green, Red and Purple Includes: 8x M3x12mm screws
Save 0%
Save %
Size: M3 (3mm) Length: 12mm Available colors: Green and PurpleIncludes: 8x M3x12mm screws
Save up to 0%
Save %
Dimensions are as follows: Outer Diameter: 8mm Inner Diameter: 3mm Overall Height: 2mm Countersink Diameter: 5.5mm
Save 0%
Save %
These cables will give you more juice to your whoop! According to micro motor godfather Benedikt at Micro Motor Warehouse the stock battery pigtai...
View full details
Sold out
FS - X6B is a 6-channel two-way receiver designed for multirotors. It uses the AFHDS 2A ( Automatic Frequency Hopping Digital System ) protocol and...
View full details
Save 0%
Save %
This is a set of 8 nylon standoffs, in a hexagonal shape (35mm). Threaded on both ends for a M3 screw.What's included8x nylon 35mm standoffs
Save 0%
Save %
Features Total voltage. Voltage of each cell individually. Percentage of the rest of total capacity. Percentage of the rest of capacity of each ...
View full details
Save 0%
Save %
TMotor bearings for F40/60 series motors Supplied 2 per bag to cover one motor.
Save 0%
Save %
A spare RPSMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.
Save 0%
Save %
A linear antenna with IPX / U.FL connector compatible with the TBS UNIFY PRO 5G8 HV or U.FL connector compatible Video transmitters. In conjuncti...
View full details
Save 51%
Save %
Seriously? How did you manage to break this Carbon bottom/middle plate? Anyway, no worry, here is a replacement one, same old stock standard carbon...
View full details
Save 42%
Save %
Charge 4 single-cell lipo batteries at once - with a regular hobby charger. This adapter is made with the finest ingredients and with great attenti...
View full details
Save 0%
Save %
A set of 2x HQ propellers, 2 blade props with 6mm hole. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets of 2 of the same...
View full details
Save 0%
Save %
SMA to SMA 45 degree connector and SMA to RPSMA
Save 30%
Save %
These XT60 connectors come pre-soldered to 4mm bullet connectors with silicone wire. Perfect as charger cables.
Save 0%
Save %
XT30 is the new connector on the block and it is perfect for Mini RC use! Forget about mini JST or Mini T-connectors or even bulky XT60 for smaller...
View full details
Save 0%
Save %
A spare SMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.
Save 67%
Save %
Inner diameter (Prop Mount): 5mmHigh quality material. Flexible, durable, virtually indestructible!Package Includes:2 x CW Propeller2 x CCW Propeller