support@flyingrobot.co.za
support@flyingrobot.co.za
Sold out
Details Upgrade your Taranis Q X7 with this plug-n-play high resolution M7 Gimbal from FrSky. The highly sensitive Hall sensors will not wear out ...
View full details
Save 0%
Save %
FrSKYs S.Port Tool Kit or STK enables configuration of your FrSKY S.Port receiver. The STK has two connecting ports, S.Port 1 (upper) Monitors, re...
View full details
Sold out
The FrSky RB –20 is a switchboard module that can operate 2 receivers and 2 batteries to provide you with total peace of mind when flying your mode...
View full details
Sold out
The XJT telemetry transmitter module is compatible with the JR style modules. The latest upgrade to the FrSky Telemetry Radio System now features u...
View full details
Sold out
The FrSky S6R 6ch Receiver w/ 3-Axis Stabilisation and Smart Port. Features a built in 3-axis gyro and 3-axis accelerometer sensor for fixed wing. ...
View full details
Sold out
The L9R receiver (9/12ch non-telemetry long range receiver). Extend your range of your FrSky 2.4GHz system with this L9R long range receiver. This ...
View full details
Sold out
FrSky has just released their new 16 Channel X8R receiver! (8 normal PWM outputs and all 16 channels on the dedicated S.BUS output) The X8R is in a...
View full details
Sold out
An upgraded version based on the RX8R receiver, it has all the same features including redundancy. The Pro version has higher precision and lower l...
View full details
Sold out
This transmitter is ICASA type approvedThe Taranis Q X7 ACCESS features 24 channels with a faster baud rate and lower latency, thanks to its high-s...
View full details
Save 0%
Save %
6 Position Switch
Save 0%
Save %
This is a set of 8 aluminum standoffs (25mm). Threaded on both ends for a M3 screw. What's included8x aluminum 25mm standoffs Available in Blac...
View full details
Save 0%
Save %
MMCX 90 Deg male to MMCX Straight Male 8cm lead
Save 0%
Save %
Have you had a bad crash and a prop broke your balance wire? Well worry no more, this cable is used to replace the JST-XH style balance plug on a L...
View full details
Sold out
This is a set of 8 aluminum standoffs (30mm). Threaded on both ends for a M3 screw. What's included8x aluminum 30mm standoffs Available in Blac...
View full details
Sold out
Samsung 30Q Li-ion INR 18650 Battery Huge Capacity = Less Charging With a 3000mAH capacity that makes other 18650s look like pipsqueaks, Samsung's ...
View full details
Save up to 0%
Save %
Time charged for repairs in our workshop.
Save 0%
Save %
Choose Large or Small and add a max of 1 of each size per order to your shopping cart and we'll pack it in the box.
Sold out
The Intellicharger i4 is a universal, automatic smart-charger compatible with almost all types of rechargeable batteries. 4-Bay Charger. The 4-bay ...
View full details
Sold out
XPower 2200mah 3S 45C Lipo with Deans connector BRAND XPower CAPACITY(MAH) 2200 VOLTAGE(V) 11.1 DISCHARGE RATE (C) 45 MAX BURST DISCHARG...
View full details
Sold out
PDB Input voltage range: 6~60V (2~12S LiPo) PDB/current sense resistor: 140A cont, 264A burst. ESC power pads: 60A cont. 100A burst 6x ESC power /s...
View full details
Save 0%
Save %
This filter is a combination of a high quality tempered glass and a neutral density filter.Introducing the new & improved static cling tempered...
View full details
Save 0%
Save %
This filter is a combination of a high quality tempered glass and a neutral density filter.Introducing the new & improved static cling tempered...
View full details
Sold out
Never lose or mix up a micro SD card again! Stores up to 10 SD cards in a credit-card sized cradle.Losing track of micro SD cards is always a conce...
View full details
Save 0%
Save %
Never lose or mix up a micro SD card again! Stores up to 10 SD cards in a credit-card sized cradle FPV is all about getting that footage after a...
View full details
Sold out
6 pin female adapter
Sold out
Quality 8cm silicone wire connected to an XT60. Perfect to solder onto your PDB.
Sold out
Bullet point BEC Board is specially designed for Naked GoPro HERO6/7/8 which weighs about 1.5g, makes your naked GoPro lighter and easy to install ...
View full details
Sold out
FEATURES High Efficiency Synchronous Step-down regulator Wide 2-8S (6-30V) Operating Input Range Continuous load current: 1.5 Amps (Max.2.5A 5s/min...
View full details
Sold out
TBS TRACER NANO RX FEATURES: 250Hz: Fastest available radio and telemetry link! Next generation 2.4GHz technology meets robust Crossfire radio engi...
View full details
Save 0%
Save %
Includes four (4) 7" spare arms for the SOURCE ONE HD carbon frame. Screws included.6mm Carbon Arms
Sold out
The SOURCE ONE is a wide-stance X configuration frame, popular for freestyle or free-range acrobatic flying. It is built to withstand harsh crashes...
View full details
Sold out
Want a 1S whoop outdoor, around the house and yard, like the 2S 75X or Mobula75 in 2018 winter? Look no further!BetFPV Meteor75 is all you need.1S ...
View full details
Sold out
Save 41%
Save %
OCDAY 4 in 1 Multi USB Charge HUB Battery Charger for DJI TELLO UAV The 4-in-1 battery charger is designed for Tello There are 4 interfaces in the ...
View full details
Sold out
USB Lipo battery convertor, with high voltage protection. Specification Input voltage : 10.5V-32V Output voltage: 3V-20V(auto-adjusted according t...
View full details
Save 0%
Save %
The Matek H7A3-SLIM Flight Controller features STM32H7A3VI, ICM20602 & MPU6000, DPS310, OSD, 7x UARTs, 2x I2C, 1xCAN, 13x PWM outputs, BEC5V an...
View full details
Sold out
Matek's H743-WING V3 Flight Controller arrives with new features and improvements over the original. This FC features a STM32H743VIT6 MCU running ...
View full details
Save 0%
Save %
Tempered glass protector precisely cut for the Tango 2. Hassle free installation. The glass protector is made to fit the tango 2 screen window perf...
View full details
Save 0%
Save %
Springs can age over time, or get lost during repairs. This set includes the orirignal tight tension springs which come with your TBS Tango 2, and ...
View full details
Save 30%
Save %
Replacement Lite-Arms for the TBS Source PodRacer 5". Thickness: 5mmINCLUDES 4 x TBS Source PodRacer 5" - Spare Lite-Arms 1 x Screws set
Save 30%
Save %
Replacement Y-Arms for the TBS Source PodRacer 5". Thickness: 5mmINCLUDES 2 x TBS Source PodRacer 5" - Spare Y-Arms 1 x Screws set
Save 6%
Save %
The next revolution in circular polarization technology, the Triumph Pro gives professional performance in a compact, durable package. Don’t let t...
View full details
Save 20%
Save %
Extremely lightweight and durable, you can expect an increase in overall motor efficiency owing to the ultra thin and stiff carbon construction. Th...
View full details
Save 0%
Save %
Propeller Diameter: 75MM Pitch : 3 Blades : 6Material : Poly Carbonate Weight :2.6gHub Diameter : 11mm Hub Thi...
View full details
Save 0%
Save %
Propeller Diameter: 5.1 inch Pitch : 3 Blades : 3Material : Poly Carbonate Weight :3.5gHub Diameter :12.5mm Hub...
View full details
Sold out
Propeller Diameter:3inch Pitch :1.8 Blades : 3Material : Poly Carbonate Weight :1.21gHub Diameter : 10mm Hub Thi...
View full details
Save up to 0%
Save %
Propeller Diameter: 4 inch Pitch : 2.5 Blades : 3Material : Poly Carbonate Weight :2.28gHub Diameter : 11.4mm ...
View full details