support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
IDS (Integrated Drive System) Servo Tray for FrSky Xact 5601/5602/5611/5612Robust Push Rod Set Different Rod Lengths Different Sizes of Arm Linka...
View full details
Save 0%
Save %
FrSky Transmitter Stand for Taranis X9D X9DP X9DPSE X7 X7SDescription: Brand: FrSky Item Name: FrSky Transmitter Stand Package Included:1 x FrSky T...
View full details
Sold out
This product is a tool for setting the channel to FrSky SBUS & CPPM compatible servo (e.g. D12MB), FrSky SBUS decoder and Futaba SBUS compatibl...
View full details
Sold out
The Archer RS receiver integrates all of the advantages of the previous receiver in its class, the R-XSR. The RS supports full-range signal control...
View full details
Sold out
This receiver is designed to be used for the Gliders. FrSky built the variometer sensor into the RX8R receiver, this will give you telemetry data ...
View full details
Sold out
The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus Series receivers include ...
View full details
Sold out
We are proud to introduce our Ethix Special Edition Mambo Radio. This edition has a few notable changes that are more tailored to the likings of Mr...
View full details
Save 0%
Save %
This adapter board is designed to fit the Nano Diversity RX like a glove, hassle free and easy soldering. With this board you can enable connectivi...
View full details
Save 0%
Save %
Carbon Fiber 3K Taiwan Matt Twill 16 x 14 x 1000mm Tube
Save 0%
Save %
Sold out
Tattu 16000mAh 6S 30C 22.2V LiPo Battery Tattu batteries provide high quality, reliable power for your Multirotor or Aircraft. All Tattu LiPos are...
View full details
Sold out
SKYRC D100 V2 AC DC Dual Balance Charger Discharger Power Supply SkyRC D100 v2 is a twin-channel charger with two independent circuits which ca...
View full details
Sold out
Sold out
Sold out
Sold out
The CQ3 is a powerful 4x charger. The charger can handle up to 4x different kinds of batteries at the same time. The 4x independent back-lit LCD sc...
View full details
Sold out
Flycolor X-CROSS BL_32 3-6S 40A 4IN1 ESC is the latest 3-6s esc for fpv racing drones.With the BL_32 firmware, it has faster reaponse and better pe...
View full details
Save 0%
Save %
10cm Linear Antenna with RP-SMA connection
Sold out
10cm Extension Cable SMA Male to SMA Female Right Angle Cable
Save 0%
Save %
SMA male to 90 degree SMA male 5cm pigtail
Sold out
SPECIFICATION Propeller Diameter: 5.1 inch Pitch : 4 Blades : 3 Material : Poly Carbonate Weight :3.8g Hub Diameter :12mm...
View full details
Sold out
LAUNCH EDITION MR STEELE V4 STOUT 2306 (1750KV) 6S FREESTYLE MOTOR This is a special edition limited to 1000pcs. Get them while you can. We launch...
View full details
Sold out
Introducing the Ethix Build Mat, this is something Mr Steele, Konasty, and SweepwingsRC of the “Team Failsafe Podcast” have been teasing about for ...
View full details
Sold out
With this board you can enable connectivities with your servos via 6ch PWM.SPECIFICATION Weight: 3.24g Size: 27 x 20 x 7mm (With Pins)
Save 0%
Save %
TBS TRACER NANO RX FEATURES: 250Hz: Fastest available radio and telemetry link! Next generation 2.4GHz technology meets robust Crossfire radio engi...
View full details
Sold out
Sold out
Skyview Landing Gear is used to mount the flight packs and provide a base to land the Alta X when the payload is top-mounted or you are not flying ...
View full details
Sold out
This kit includes replacement wear-parts, fasteners, and accessories for Alta X. In the Box: Qty 3 - 10A Mini Blade FusesQty 4 - Replacement batt...
View full details
Sold out
With this RTK GPS Ground Station connected to your ground station computer, you can unlock Real-Time Kinematic (RTK) technology for centimeter loca...
View full details
Sold out
The Alta OSD transmits through an installed FPV system on Alta giving the pilot critical flight information (battery voltage, heading, ground speed...
View full details
Sold out
This is a balanced clockwise or counter-clockwise replacement prop set for a single motor that includes the ActiveBlade hub.Activeblade compensate...
View full details
Sold out
Fly your MoVI motorized gimbal stabilizer beneath your ALTA with the FREEFLY Aero Landing Gear. Using the included parts, the landing gear secures ...
View full details
Sold out
Transport your Alta X all over the world in this tough hard case. The custom foam insert was designed and tested to keep your Alta X secure and saf...
View full details
Sold out
We designed Alta X from the ground up to capitalize on the benefits of large, efficient props while maintaining the crisp control and unmatched pre...
View full details
Sold out
Compared with traditional battery, Diamond solid-state li-ion battery achieves both safety and performance improvement, which features high energy...
View full details
Save 19%
Save %
The wait is over!I would like to Introduce the Mr. Steele V4 SILK 2306 (2345KV) 4S FPV freestyle motor. I take great pride in my work and am always...
View full details
Sold out
The updated version of the HD Ethix goggle strap is specific designed for the DJI FPV goggles v1/v2. This mild redesign features a smaller battery...
View full details
Sold out
Product Description RFD868x New Features: New Processor, ARM 32 bit core. Air data rate: 500kbit/s. AES Hardware accelerated encryption. *Fully ...
View full details
Save 0%
Save %
300 pcs. 2mm hardware for your 2" and 3" builds Contains: 80x M2 Nut 80x M2x6mm screw 20x 6mm standoff and 6mm stud 20x 8mm standoff and 6mm stud ...
View full details
Save up to 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (30mm). Threaded on both ends for a M2 screw.What's included4x aluminum 30mm standoff...
View full details
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (25mm). Threaded on both ends for a M2 screw.What's included4x aluminum 25mm standoff...
View full details
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (23mm). Threaded on both ends for a M2 screw.What's included4x aluminum 23mm standoff...
View full details
Save up to 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (20mm). Threaded on both ends for a M2 screw.What's included4x aluminum 20mm standoff...
View full details
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (15mm). Threaded on both ends for a M2 screw.What's included4x aluminum 15mm standoff...
View full details
Sold out
Features & Specifications Receiving frequency: 9CH (1080MHz to 1360MHz) RX Sensitivity: -95dBm Band-pass filter 950MHz~1450MHz Dual input opti...
View full details
Save 0%
Save %
Overview The Zenmuse P1 integrates a 45 MP full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. Designed for...
View full details