support@flyingrobot.co.za
support@flyingrobot.co.za
Sold out
The ES900RX is a long-distance 915mhz wireless receiver developed and designed based on the open-source ExpressLRS software. This module is charac...
View full details
Sold out
The ES900TX module is a long-distance 915mhz wireless transmission developed and designed based on the ExpressLRS open-source software. The ES900T...
View full details
Sold out
The adapter plugs allow for the cable to be used with the older TX16S, TX12 and T8 4 band connectors to the newer TX16S MKII, TX12 MKII, Zorro and ...
View full details
Sold out
The ES24TX Pro Micro ExpressLRS TX module is an upgraded version of the ES24TX module. The ES24TX Pro comes with improvements over the original. M...
View full details
Sold out
The Sequre SQ-001 soldering iron is very similar to the very popular TS100 with all the same features and quality but at a more wallet friendly pri...
View full details
Sold out
Carbon Fiber 3k Tube 20mm External diameter 18mm Internal diameter
Save 0%
Save %
Sold out
Sold out
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connect...
View full details
Save 0%
Save %
Features: Motor wire protectors to prevent from prop strikes. There are different lengths for our iFlight BNFs: 65mm: F5D and F6D rear Arms Chim...
View full details
Save 0%
Save %
RC Pro Plus has been at the forefront of battery connector development for years. Providing high quality, and high reliability, RCPP has quickly be...
View full details
Sold out
Specifications Input Voltage: 7-36V DC Output Voltage: 5V 1A 12V Input Current: 40mA@Pitmode, 95mA@25mW, 185mA@200mW, 250mA@500mW, 380mA@800mW Ch...
View full details
Save 0%
Save %
SPECIFICATIONS: KV: 1300KV Color: Black + Red No. of Cells (Lipo): 6S Configuration: 12N14P Stator Diameter: 28mm Stator Length: 8mm Propeller Sh...
View full details
Sold out
The Velox Cine F7 flight controller from T-Motor is the FC that matches any type of flight. Indeed, whether freestyle, cinematic or long-range, th...
View full details
Sold out
T-Motor's F7 Pro Flight Controller has arrived! Enjoy full function in a wireless state! Great for cinematic professional use. This FC features 8 U...
View full details
Sold out
IMPROVED EFFICIENCY Longer Flight time due to improved propeller efficiency. Get extra flight time per battery to unleash the full potential of t...
View full details
Sold out
Simple propeller swap with the built-in quick-release for Phantom 4 provides a genuine upgrade for a longer flight time and low-noise operation. Ma...
View full details
Sold out
DJI MINI 2 / DJI MINI SE Dress up your MINI 2 / MINI SE with STEALTH Upgrade Propellers to get an exciting up to 3% more flight time and up to 37%...
View full details
Sold out
Performance 1045 White Multi-Rotor Drone Propellers Designed for VTOL drones, optimized for performance and outstanding efficiency in hover and for...
View full details
Save up to 0%
Save %
Sensirion SDP3x Airspeed Sensor Ki is built on CMOSens® next generation sensor chip, at the heart of Sensirion’s new differential pressure and fl...
View full details
Sold out
The UAS HVC series is compatible with 3S LiPo - 12S LiHV power systems - allowing for the next level of performance and efficiency for your UAS an...
View full details
Sold out
Includes: One (1) KDE Direct XF UAS Propeller Bracket Assembly (Black Edition) One (1) KDE Direct XF UAS Propeller Bracket Adapter (ф4.0 x ф6.0 ...
View full details
Save 0%
Save %
Save 0%
Save %
Length: 95mm Diameter: 8mm Hole diameter: 2.5mm Silicone Tube Length: 1 meter Silicone Tube OD: 5.4mm Silicone Tube ID: 2.4mm Includes 1x Detach...
View full details
Save 0%
Save %
Save 0%
Save %
Save 0%
Save %
Save 0%
Save %
Benewake - TFmini Plus LiDAR - IP65 - 12m range Please see 'Downloads' section for the product's Datasheet and Manual. For software see Benewak...
View full details
Sold out
Sold out
Spinner only
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connect...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force conne...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connecto...
View full details
Sold out
NOTE: Currently shipping Rev "M10070E".The mRo Location One is a multi-constellation GNSS powered by the new uBlox M9N module. This smart device is...
View full details
Sold out
The RFDesign TXMOD is an all in one long range telemetry data and RC control system. The TXMOD V2 release supports SPORT telemetry data from the ...
View full details
Sold out
DJI Matrice 350 - BS65 Battery Station The battery station is a one-stop solution for battery charging, storage, and transport. The new Storage Mo...
View full details
Sold out
An upgraded flagship drone platform, the Matrice 350 RTK sets a new benchmark for the industry. This next-generation drone platform features an al...
View full details
Sold out
The output voltage differs. Please select the version required: 1. Standard Option- 4 outputs as follows: 3 outputs x 5.3V / 10A 1 output x 12....
View full details
Save 0%
Save %
Save 0%
Save %
This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...
View full details
Sold out
This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...
View full details
Save 0%
Save %
The frame features a traditional look and geometry to maintain the flight characteristics familiar to users, ensuring easy compatibility with the B...
View full details