support@flyingrobot.co.za
support@flyingrobot.co.za
Sold out
The TS100 Digital OLED Programmable Soldering Iron is an internal heating intelligent CNC soldering iron. It is easy to assemble and disassemble f...
View full details
Sold out
(2CW+2CCW) - Poly Carbonate
Sold out
Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard" :) ) down to a bare minimum for FPV racing, at ...
View full details
Sold out
Sold out
Finally a purpose built FPV earbud that we have engineered from the ground up to favor sound quality from onboard microphones! We hand-selected th...
View full details
Sold out
SPEKTRUM DSMX QUAD RACE SERIAL RECEIVER WITH TELEMETRY (SPM4649T) The SPM4649T quad racing serial receiver offers full-range performance with inte...
View full details
Sold out
A new diversity receiver for FlySky radios. Tested for extreme reliability and no fail safes. It has been designed from the ground up for the sole ...
View full details
Sold out
Gemfan Flash 2.5inch props These are great 2.5" props. Perfect for a brushless micro like the BabkyhawkR
Sold out
WANT PROOF? WE TOLD YA DYNAMITE COMES IN SMALL PACKAGES! Gemfan is back at it again! Now for the lover of all things micro. The new tough as nails ...
View full details
Sold out
TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering exp...
View full details
Sold out
• Longer Flight Time• 100% Balance • Higher Loaded Ability• Lightweight / High-strength
Sold out
The RCY connector is a compact, 2.5mm (.098″) pitch wire-to-wire connector for use with a variety of circuits, from signal circuits to power supply...
View full details
Sold out
This is a set of 8 nylon standoffs, in a hexagonal shape (6mm). Threaded on both ends for a M2 screw.What's included8x nylon 6mm standoffs
Sold out
XT60 Male 10 cm Pigtail (Black)
Sold out
This is the power switch module as used in the Taranis Plus, it will not work in the normal Taranis. Includes the NiMH 2000 mAh charge circuit.
Sold out
Standard replacement gimbal for Q-X7 radio
Sold out
Foam lipo pad - conforms to Reverb top plate 4mm thick to protect the lipo from screw heads.
Sold out
SkyRC PC1080 is a dual channel 6S LiPo charger for industrial application drones. It is reliable, safe and easy to operate while with comprehens...
View full details
Sold out
Size: 5mm (M3) x8 pieces Colour: Black
Sold out
The HQ V1S prop has proven to be very popular among the elite drone racing pilots. Now the more punchy and thrusty 5.0 pitch version has been rele...
View full details
Sold out
Cell Count: 2 S Voltage: 7.4V Capacity: 800 mAh Discharge: 20C Dimention Length: 55 mm Dimention Width: 29 mm Dimention Height: 14 m...
View full details
Sold out
Cell Count: 4 S Voltage: 14.8V Capacity: 3300 mAh Discharge: 45C Dimention Length: 136 mm Dimention Width: 43 mm Dimention Height: ...
View full details
Sold out
All the screws required for Vendetta II replacements.
Sold out
With improved signal sensitivity and durability, the Immortal T v2 antenna is the perfect companion for race quads. The centerpiece housing is made...
View full details
Sold out
Save 0%
Save %
Key Features Patent-pending gimbal design with spring configuration switch DSMX Wireless trainer link Virtually unlimited model memory-transmitt...
View full details
Sold out
Standard TBS Video transmitter cable used in all TBS 2.4GHz and 5.8GHz systems. Provides 5V to the TBS Video transmitters. *compatible with TBS U...
View full details
Sold out
20 Amp Air ESC by Tiger Motors. Compatible with 3-4s Lipos. Note: This ESC does not include a BEC.
Sold out
NOTE: M3 (3mm) Only fits stock Taranis QX7 and X9D gimbals Details FrSky CNC machined Aluminum Gimbal Stick Ends for Transmitter Stick with anti-l...
View full details
Sold out
Steps down 5v to 3.3v. Perfect for connecting any Spektrum satellite receiver to a flight controller.
Sold out
2.1mm barrel to Banana style adapter for Fat Shark batteries.
Sold out
Details The Runcam Split Lens Extension Cables. Includes 1x 180mm Lens Extension Cable 1x 90mm Lens Extension Cable
Sold out
Lipo Pad Conforming to the 5" Alien Top Plate Designed to protect the lipo from screw heads. The material is between neoprene and rubber in densit...
View full details
Sold out
PDB KIT 4oz Copper - 2mm PCB XT-60 pair and spacer (9x) M3 Press nut - Stainless Steel PDB Weight including 4 press nuts 15g XT-60 Weight 3...
View full details
Sold out
Carefully crafted hand tools selected by TBS for all your modifications and repairs. Heat treated for extra hardness. Anodized black because blac...
View full details
Sold out
NOTE: M4 (4mm) Fits both M7 and M9 Hall Sensor Gimbals Details FrSky CNC machined Aluminum Gimbal Stick Ends for Transmitter Stick with anti-locki...
View full details