support@flyingrobot.co.za
support@flyingrobot.co.za
Save up to 0%
Save %
Manufactured by Team BlackSheep, this antenna is your cheap entry into circular polarization. The 5dbi gain provides enough beamwidth to comfortabl...
View full details
Save 0%
Save %
Tip Type:TS-KU Length:about 105.5mm Weight:10g It's a internal-heated heating core specially for TS100,tip and heater as a whole.
10x M3 rubber O ring for FC. H-1mm OD-5mm
Save 0%
Save %
The Lipo Killer discharges old or damaged batteries you wish to dispose of down to 0v. This eliminates all charge from the battery and makes the pa...
View full details
Save 0%
Save %
Dimensions are as follows: Outer Diameter: 7.8mm Inner Diameter: 3mm Overall Height: 2mm Countersink Diameter: 5.5mm
Save up to 0%
Save %
4x Aluminum Stack Standoff 6mm+6mm
Save up to 0%
Save %
4x Aluminum Stack Standoff 4.5mm+6.5mm M3 thread on both male and female ends.
Save 0%
Save %
4x 5mm Threaded Anodised Spacer
Save up to 0%
Save %
4x 2mm Thick M3 Threaded Anodised Spacer
Save 0%
Save %
Save 0%
Save %
RPSMA to RPSMA (Male to male)
Save 0%
Save %
SMA to SMA (Male to male)
Save up to 0%
Save %
5pc CW + 5pc CCW SPECIFICATION Propeller Diameter : 2.56 inch Pitch :1 Blades 2 Material : Poly Carbonate Weight : 0.46 Hub Diameter :5mm Hub Thi...
View full details
Save 30%
Save %
Don’t let the small size fool you, the BlueBeam Pro is a high performance CP antenna for your 1.3GHz which sacrifices nothing on account of its siz...
View full details
Save 0%
Save %
Save 0%
Save %
Save 0%
Save %
PREORDERS OPEN NOW - Stock arriving 23 April 2019 Set of four arms for the Micro Alien Frame Can use up to a 3" prop with these arms.
Save 4%
Save %
The Raptor Slim is an ultra-narrow single ESC made for racing drones that need all the weight and space savings possible. The Raptor Slim measures ...
View full details
Save 30%
Save %
Cross-polarized (dual polarized) MIMO receiver antenna for diversity goggle modules. Can be mounted to goggle modules and will work like two linear...
View full details
Save 0%
Save %
Unipolar ultralight VTx antenna for miniquads and racing drones. Can be mounted using the included right angle aluminum bracket or using 3D printed...
View full details
Save 0%
Save %
Used for connecting Here GNSS or Here+ GNSS Rover to GPS 2 port in PH2.1 Only useful when using Here or Here+ as a secondary GPS for Pixhawk Len...
View full details
Save 0%
Save %
1x 10cm RPSMA Male to Right Angle RPSMA Female
Save 0%
Save %
Connector Type: 3 pin 3.5mm bullet plug. Weight: 9.6g per pair (including sleeves).
Save 0%
Save %
1 x Male Connector,1 x Female Connector,2 x Wire Guiding Sleeves