support@flyingrobot.co.za
support@flyingrobot.co.za
Save 30%
Save %
Don’t let the small size fool you, the BlueBeam Pro is a high performance CP antenna for your 1.3GHz which sacrifices nothing on account of its siz...
View full details
Save 13%
Save %
Save 0%
Save %
Save 0%
Save %
PREORDERS OPEN NOW - Stock arriving 23 April 2019 Set of four arms for the Micro Alien Frame Can use up to a 3" prop with these arms.
Save 30%
Save %
Cross-polarized (dual polarized) MIMO receiver antenna for diversity goggle modules. Can be mounted to goggle modules and will work like two linear...
View full details
Save 0%
Save %
Unipolar ultralight VTx antenna for miniquads and racing drones. Can be mounted using the included right angle aluminum bracket or using 3D printed...
View full details
Save 0%
Save %
Used for connecting Here GNSS or Here+ GNSS Rover to GPS 2 port in PH2.1 Only useful when using Here or Here+ as a secondary GPS for Pixhawk Len...
View full details
Save 0%
Save %
1x 10cm RPSMA Male to Right Angle RPSMA Female
Save 0%
Save %
Connector Type: 3 pin 3.5mm bullet plug. Weight: 9.6g per pair (including sleeves).
Save 0%
Save %
1 x Male Connector,1 x Female Connector,2 x Wire Guiding Sleeves
Save 58%
Save %
The classic 1.3GHz Crosshair from VAS has received an update. The Crosshair was always known for its power and penetration, and the Crosshair XTREM...
View full details
Save 42%
Save %
A pair of gloss white module doors for the ImmersionRC rapidFire Receiver. This version comes in gloss white to match many versions of Fat Shark go...
View full details
Save 0%
Save %
Save 30%
Save %
Replacement Vortex 230 Mojo 4mm carbon fiber arm and blue, original color, plastic ESC cover. Includes 1x Vortex 230 Mojo - Crash Kit 3 - CF Arm
Save 0%
Save %
DESIGNED BY IBCRAZY This filter improves video reception for 1.2-1.3GHz video receivers in combination with TBS Crossfire. Due to the poor filteri...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-ILS Quantity: 1Pc Length: approx. 1...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-C1 Quantity: 1Pc Length: approx. 10...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-I Quantity: 1Pc Length: approx. 103...
View full details
Save 0%
Save %
SPECIFICATION Propeller Diameter: 5 inch Pitch: 3.1 Blades: 3 Material: Poly Carbonate Weight: 3.6g Hub Diameter: 12.5mm Hub Thickness: 6mm Shaft...
View full details
Save 0%
Save %
Connection Cable KISS FC / FC V2-> 24A PDB KISS FC / FC V2-> 25A 4in1 ESC Connection Cable to connect the KISS FC / FC V2 to the KISS Carri...
View full details
Save 0%
Save %
Please select front(Short) or back(long) arm 1x Laser S Arm
Save 0%
Save %
A pair of hand tuned antennas to be used with the TBS Crossfire 8ch diversity receiver. SMA connector.
Save 0%
Save %
2 × T10x4.5 plastic self-locking propellers (1 CW and 1 CCW)Matched to the T-motor Air 2216 880kv motors
Save 51%
Save %
Exway Screw set
Save 50%
Save %
Over time your motor covers can get chipped or dented. These replacement motor covers are a great way to freshen up your Exway X1.
Save 50%
Save %
Stock replacement grip tape for the Exway X1
1x CL1 SpareTop Plate
Save 30%
Save %
Compatible with all Alien PDB's
Save 0%
Save %
FEATURES The Stout bell has the same efficiency as the Silk but with more power Upgraded more powerful magnets giving the overall feel of the motor...
View full details
Save 0%
Save %
A SMA to SMA extender with magnetic base. You may use this extender on your Crossfire, 2.4gHz or 5.8gHz devices with minor signal loss SPECIFICATI...
View full details
Save up to 0%
Save %
This filter is a combination of a high-quality tempered glass and a neutral density filter (ND4). These protectors are low cost and are easily repl...
View full details
Save up to 0%
Save %
Lens is cut using industrial strength lasers. The result is a clean and extremely sharp finish absent of "Micro-scratches". (The tiny spots on your...
View full details
Save 0%
Save %
Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every version of the Cube flight controller. With smaller...
View full detailsIncludes: 1x 2mm side plate
Save 0%
Save %
Please be aware it does not include Bluetooth. A NEW ERA OF CONNECTIVITY The TBS CROSSFIRE is a long range R/C link based on the newest RF techn...
View full details
Save 0%
Save %
Magnum Hot Air Tip Round 2.5mm Magnum Hot Air Tip Flat 3.5mm Magnum Hot Air Tip Round 4.0mm