support@flyingrobot.co.za
support@flyingrobot.co.za
Save 31%
Save %
Foxeer TM25 Switcher breakout Cable
Save 30%
Save %
Foxeer Legend 2 Lens
Save 30%
Save %
Foxeer Legend 2 Lens and Lens Module
Save 0%
Save %
TRUE DIVERSITY, FULL RANGE The TBS CROSSFIRE 8ch Diversity Receiver is a compact R/C receiver with 8ch PWM outputs (PPM, SBUS and CRSF capable), w...
View full details
Save 0%
Save %
Standard pigtail that comes with each TBS UNIFY PRO 5G8 HV.
Save 0%
Save %
UBEC DUO 4A/5~12V & 4A/5V This device is a high-efficiency, switch-mode buck regulator with two output channels. It works with 7~26Vdc input. ...
View full details
Save 0%
Save %
This is a replacement 2.4GHz antenna for the FrSky XSR receiver. Requires soldering to replace.
Save 0%
Save %
Connector: IPEX4 Compatible receivers: X4R / X4RSB / S6R / RXSR / XM / XM+ Length: 150mm Includes 1 X Receiver Antenna
Save 58%
Save %
Spare parts for the QX90 Microquad frame. Included: 4 x Motor grommets 1 x Buzzer 1 x Power Cable 6 x Nylon standoffs 1 x Upper Board 1 x Pack of ...
View full details
Save 0%
Save %
This is a set of 8 aluminum standoffs, tapered, and with a textured finish (25mm). Threaded on both ends for a M3 screw.What's included8x aluminu...
View full details
Save up to 0%
Save %
This is a set of 8 aluminum tapered and textured standoffs (35mm). Threaded on both ends for a M3 screw. What's included8x aluminum 35mm standoffs...
View full details
Save 0%
Save %
Description The PowerWhoop Connector is here! These connectors are far superior to the current standard (Micro JST) and are easy to solder on. The...
View full details
Save 0%
Save %
1S 3.7V 2-Pin Battery Cable
Save 42%
Save %
This Set of leads makes charging 4 1s batteries possible using a conventional smart charger. More flying in less time. Go on, you know you want it.
Save 0%
Save %
2s Balance plug PH2 connector with wires
Save 29%
Save %
Standard ZMR250 front or FPV Carbon camera mounting plate.
Save 0%
Save %
Genuine FrSky 2 way switch for the Taranis-long Specs: Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 2
Save 0%
Save %
Genuine FrSky momentary switch for the Taranis Specs Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 1
Save 0%
Save %
Size: M3 (3mm) Length: 16mm Available colors: Green, Red and Purple Includes: 8x M3x12mm screws
Save 0%
Save %
Size: M3 (3mm) Length: 12mm Available colors: Green and PurpleIncludes: 8x M3x12mm screws
Save up to 0%
Save %
Dimensions are as follows: Outer Diameter: 8mm Inner Diameter: 3mm Overall Height: 2mm Countersink Diameter: 5.5mm
Save 0%
Save %
These cables will give you more juice to your whoop! According to micro motor godfather Benedikt at Micro Motor Warehouse the stock battery pigtai...
View full details
Save 0%
Save %
This is a set of 8 nylon standoffs, in a hexagonal shape (35mm). Threaded on both ends for a M3 screw.What's included8x nylon 35mm standoffs
Save 0%
Save %
Features Total voltage. Voltage of each cell individually. Percentage of the rest of total capacity. Percentage of the rest of capacity of each ...
View full details
Save 0%
Save %
TMotor bearings for F40/60 series motors Supplied 2 per bag to cover one motor.
Save 0%
Save %
A linear antenna with IPX / U.FL connector compatible with the TBS UNIFY PRO 5G8 HV or U.FL connector compatible Video transmitters. In conjuncti...
View full details
Save 51%
Save %
Seriously? How did you manage to break this Carbon bottom/middle plate? Anyway, no worry, here is a replacement one, same old stock standard carbon...
View full details
Save 42%
Save %
Charge 4 single-cell lipo batteries at once - with a regular hobby charger. This adapter is made with the finest ingredients and with great attenti...
View full details
Save 0%
Save %
A set of 2x HQ propellers, 2 blade props with 6mm hole. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets of 2 of the same...
View full details
Save 0%
Save %
SMA to SMA 45 degree connector and SMA to RPSMA
Save 0%
Save %
XT30 is the new connector on the block and it is perfect for Mini RC use! Forget about mini JST or Mini T-connectors or even bulky XT60 for smaller...
View full details
Save 0%
Save %
A spare SMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.
Save 67%
Save %
Inner diameter (Prop Mount): 5mmHigh quality material. Flexible, durable, virtually indestructible!Package Includes:2 x CW Propeller2 x CCW Propeller
Save 84%
Save %
Frequency: 5.8GGain: 16dBiOnly use on your video receiverSMA/RPSMA Directional antenna Package Includes 1 x 5.8G Right Hand Helical Antenna1 x Cab...
View full details
Save up to 0%
Save %
A set of 2x HQ propellers, 2 blade props with 6mm hole. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets of 2 of the same...
View full details
Save 0%
Save %
A set of 2x HQ propellers, 2 blade props with 6mm hole. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets of 2 of the same ...
View full details
Save up to 0%
Save %
A set of 2x HQ propellers, 2 blade props with 6mm hole. They come with a set of plastic reducers (3,4,5,6 mm). Includes 2x 8x5 CCW or CW black ny...
View full details
Save up to 0%
Save %
This is a set of 8 aluminum standoffs, with a textured finish (35mm). Threaded on both ends for a M3 screw.What's included8x aluminum 35mm stando...
View full details
Save 27%
Save %
Save 0%
Save %
These are the motors the inductrix is supplied with and not the upgraded versions. There are two varieties of motors: Clockwise - Grey plastic end ...
View full details
Save 0%
Save %
The best battery connectors on the market just got better with the development of the XT60U.Like the original XT60, this connector is made from hig...
View full details
Save up to 0%
Save %
Individual M3 nylon hex nuts
Save 0%
Save %
A spare RPSMA pigtail for the TBS Unify PRO 5G8. A quick solder and you're good to go.
Save 0%
Save %
This is a set of 8 aluminum standoffs, with a textured finish (25mm). Threaded on both ends for a M3 screw. What's included 8x aluminum 25mm s...
View full details
Save 0%
Save %
M5 aluminium CCW / Left Hand / Reverse Low Profile Loc Nuts with flange Pack of 4 Individual anodized aluminum M5 flanged nylon lock nuts. I...
View full details
Save 0%
Save %
M5 aluminium CW / Right Hand / Normal Low Profile Loc Nuts with flangePack of 4 Individual anodized aluminum M5 flanged nylon lock nuts. Incl...
View full details
Save 0%
Save %
1x Edge mount connector