support@flyingrobot.co.za
support@flyingrobot.co.za
Sold out
Description: Brand: Frsky Item Name:X9D PLUS Antenna. Package Included: 1 x Frsky Taranis X9D Plus Transmitter Parts Antenna
Sold out
The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencie...
View full details
Sold out
We are now launching ER5 Series ELRS PWM receivers. ER5C ELRS PWM receiver for Surface & marine R/C applications, and ER5A ELRS PWM receiver fo...
View full details
Sold out
The ES900RX is a long-distance 915mhz wireless receiver developed and designed based on the open-source ExpressLRS software. This module is charac...
View full details
Save 0%
Save %
The ES900TX module is a long-distance 915mhz wireless transmission developed and designed based on the ExpressLRS open-source software. The ES900T...
View full details
Sold out
The adapter plugs allow for the cable to be used with the older TX16S, TX12 and T8 4 band connectors to the newer TX16S MKII, TX12 MKII, Zorro and ...
View full details
Sold out
The ES24TX Pro Micro ExpressLRS TX module is an upgraded version of the ES24TX module. The ES24TX Pro comes with improvements over the original. M...
View full details
Sold out
The Sequre SQ-001 soldering iron is very similar to the very popular TS100 with all the same features and quality but at a more wallet friendly pri...
View full details
Sold out
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connect...
View full details
Save 0%
Save %
Features: Motor wire protectors to prevent from prop strikes. There are different lengths for our iFlight BNFs: 65mm: F5D and F6D rear Arms Chim...
View full details
Save 0%
Save %
Save 0%
Save %
Save 0%
Save %
Benewake - TFmini Plus LiDAR - IP65 - 12m range Please see 'Downloads' section for the product's Datasheet and Manual. For software see Benewak...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connect...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force conne...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connecto...
View full details
Save 0%
Save %
This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...
View full details
Sold out
This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...
View full details
Save 0%
Save %
The frame features a traditional look and geometry to maintain the flight characteristics familiar to users, ensuring easy compatibility with the B...
View full details
Save 0%
Save %
The best micro race props available today! For brushed whoops. Just when you think TinyWhoop props are no longer evolving.....Check out these TBS x...
View full details
Sold out
The revolution in circular 5.8 GHz technology. Hand-tuned for ultimate noise and reflection rejection. True circularity and great range. Designed b...
View full details
Sold out
The ultimate FPV racing antenna just got better. With lower weight and even better durability, the TBS Triumph Stub has it all. While other antenna...
View full details
Sold out
The newest unbreakable strap from "Swagger-FPV-Shizzle" in cooperation with Team BlackSheep. Size: 240 x 20mm
Sold out
Made for High Performance Race Copters with 20x20mm Electronic Stacks. This strap is only 16mm wide.
Sold out
Fat goggle strap so your DJI FPV goggles strap on tight while you teleport to another dimension! The HD version of the Ethix goggle strap is made f...
View full details
Save 0%
Save %
Source One V5 5inch replacement arms. Includes 2 x 5" spare arms for the SOURCE ONE 5" carbon frame. 6mm Carbon Arms
Sold out
SPECIFICATION MCU: STM32F411 GYRO:BMI270 VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8G...
View full details
Sold out
Introducing the Ethix D6 Pro charger. 6S capable AC or DC input battery charger with two charging channels, wireless charger on top, and a USB A ac...
View full details
Sold out
SPECIFICATIONS: Drone Size: 65mm Flight Controller: BeeBrain BLV4 CRSF build in VTX and Crossfire Receiver Frame: Cockroach65 Brushless Frame (Sol...
View full details
Save 0%
Save %
TX16s MKII Trim switch rockers
Save 0%
Save %
TX16s Replacement Satin Black Switch Nuts Tall
Save 0%
Save %
TX16s Replacement Satin Black Switch Nuts Short
Save 0%
Save %
Description:Brand name: FlycolorItem number: FlyDragon Lite Continuous current: 40A Instantaneous current (10s): 50A BEC: 5V/3A Support voltage: 2-...
View full details
Sold out
iFlight Replacement DJI FPV Goggles V2 Sponge Foam Padding PRODUCT DESCRIPTION The Replacement DJI FPV Goggles Sponge Foam Padding is a thicker ...
View full details
Sold out
Durable 5.8G antenna for Analog or Digital FPV. The perfect upgrade part for your DJI Air Unit to avoid buying fragile stock antennas again and a...
View full details
Sold out
Durable 5.8G antenna for Analog or Digital FPV. The perfect upgrade part for your DJI Air Unit to avoid buying fragile stock antennas again and aga...
View full details
Sold out
Description Durable 5.8G antenna for Analog or Digital FPV. The perfect upgrade part for your DJI Air Unit to avoid buying fragile stock antennas...
View full details
Sold out
Durable 5.8G antenna for Analog or Digital FPV. The perfect upgrade part for your DJI Air Unit to avoid buying fragile stock antennas again and aga...
View full details
Sold out
Description Durable 5.8G antenna for Analog or Digital FPV. The perfect upgrade part for your DJI Air Unit to avoid buying fragile stock antennas...
View full details
Save 0%
Save %
XT30 is the new connector on the block and it is perfect for Mini RC use! Forget about mini JST or Mini T-connectors or even bulky XT60 for smaller...
View full details
Save 0%
Save %
Description: Brand Name: AmassItem Name: XT60+Body Material: Gold-plated copperInternal Material: Nylon/PAInternal Resistance: 0.8mΩMax. RC/MC: 60A...
View full details
Sold out
Propeller Diameter: 13 inch Pitch : 9 Blades : 3Material : Carbon Reinforced Nylon Weight : 46gHub Diameter :21.5mm ...
View full details
Save 0%
Save %
Propeller Diameter: 5inch Pitch : 3.7 Blades : 3Material : Poly Carbonate Weight :4gHub Diameter :13.3mm Hub Th...
View full details
Sold out
Propeller Diameter: 8 inch Pitch : 4.3 Blades : 3Material : Glass Fiber Reinforced Nylon Weight : 13.5gHub Diameter :15.8...
View full details
Save 0%
Save %
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path i...
View full details
Sold out
A video transmitter just for racers. 5g weight, 25 - 800mW output power (user adjustable). Cutting weight and flying far has never been this easy a...
View full details
Save 0%
Save %
FrSky Taranis X9E and X9DP SE Transmitter Parts Replacement 1 position long switch Description: Brand: FrSky Item Name: FrSky Taranis X9E and X9D...
View full details