support@flyingrobot.co.za
support@flyingrobot.co.za
Sold out
The Sequre SQ-001 soldering iron is very similar to the very popular TS100 with all the same features and quality but at a more wallet friendly pri...
View full details
Sold out
Sold out
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connect...
View full details
Save 0%
Save %
Features: Motor wire protectors to prevent from prop strikes. There are different lengths for our iFlight BNFs: 65mm: F5D and F6D rear Arms Chim...
View full details
Save 0%
Save %
Save 0%
Save %
Save 0%
Save %
Benewake - TFmini Plus LiDAR - IP65 - 12m range Please see 'Downloads' section for the product's Datasheet and Manual. For software see Benewak...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connect...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force conne...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connecto...
View full details
Save 0%
Save %
This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...
View full details
Sold out
This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...
View full details
Save 0%
Save %
The frame features a traditional look and geometry to maintain the flight characteristics familiar to users, ensuring easy compatibility with the B...
View full details
Save 0%
Save %
The best micro race props available today! For brushed whoops. Just when you think TinyWhoop props are no longer evolving.....Check out these TBS x...
View full details
Sold out
The revolution in circular 5.8 GHz technology. Hand-tuned for ultimate noise and reflection rejection. True circularity and great range. Designed b...
View full details
Sold out
The ultimate FPV racing antenna just got better. With lower weight and even better durability, the TBS Triumph Stub has it all. While other antenna...
View full details
Sold out
The newest unbreakable strap from "Swagger-FPV-Shizzle" in cooperation with Team BlackSheep. Size: 240 x 20mm
Sold out
Made for High Performance Race Copters with 20x20mm Electronic Stacks. This strap is only 16mm wide.
Sold out
Fat goggle strap so your DJI FPV goggles strap on tight while you teleport to another dimension! The HD version of the Ethix goggle strap is made f...
View full details
Save 0%
Save %
Source One V5 5inch replacement arms. Includes 2 x 5" spare arms for the SOURCE ONE 5" carbon frame. 6mm Carbon Arms
Sold out
SPECIFICATION MCU: STM32F411 GYRO:BMI270 VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8G...
View full details
Sold out
Introducing the Ethix D6 Pro charger. 6S capable AC or DC input battery charger with two charging channels, wireless charger on top, and a USB A ac...
View full details
Sold out
SPECIFICATIONS: Drone Size: 65mm Flight Controller: BeeBrain BLV4 CRSF build in VTX and Crossfire Receiver Frame: Cockroach65 Brushless Frame (Sol...
View full details
Save 0%
Save %
TX16s MKII Trim switch rockers