support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (23mm). Threaded on both ends for a M2 screw.What's included4x aluminum 23mm standoff...
View full details
Save up to 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (20mm). Threaded on both ends for a M2 screw.What's included4x aluminum 20mm standoff...
View full details
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (15mm). Threaded on both ends for a M2 screw.What's included4x aluminum 15mm standoff...
View full details
Save 23%
Save %
Overview The 9455S propellers have a brand new aerodynamic design giving the Phantom 4 series an impressive noise control performance. When used ...
View full details
Save 0%
Save %
DESCRIPTION: Compatible with Matrice 300 RTK Pair of foldable propellers Replacement 2110 Propellers for DJI Matrice 300 RTK What's in the box:...
View full details
Save 0%
Save %
The CellMeter 8 is defintely an upgrade from the CellMeter 7. The CellMeter 8 boasts new features that the old tester wishes it had. Not only can...
View full details
Save 0%
Save %
1x Adjustable 4 In 1 Multi Tool - Hex
Save 0%
Save %
Description:Item Name: Lipo battery voltage testerItem NO.: BX100Low-voltage Alarm Mode: 2~8SGroup Voltage Range: 0.5~4.5VTotal Voltage Range: 0.5~...
View full details
Save 0%
Save %
A water-resistant coating designed for RC and electronics components. Easy to apply and durable. Kotking is designed to keep your electronics dr...
View full details
Save 0%
Save %
Propeller Diameter: 8 inch Pitch : 4 Blades : 3Material : Glass fiber Nylon Weight : 12.8gHub Diameter :15.7mm ...
View full details
Save 0%
Save %
Propeller Diameter: 8 inch Pitch : 4.5 Blades : 3Material : Carbon Reinforced Nylon Weight : 15.5gHub Diameter :18mm ...
View full details
Save 0%
Save %
Propeller Diameter: 4 inch Pitch : 2 Blades :3Material : Poly Carbonate Weight :2gHub Diameter : 9.8mm Hub Th...
View full details
Save 0%
Save %
Propeller Diameter: 8 inch Pitch : 4.1 Blades : 2Material : Carbon Reinforced Nylon Weight : 0.41gHub Diameter : 13mm ...
View full details
Save 0%
Save %
Save 0%
Save %
Extend the compatibility for Seagull #MAPWith an extra camera cable for Seagull #MAP-series triggers - your can extend the compatibility for othe...
View full details
Save 0%
Save %
Extend the compatibility for Seagull #MAPWith an extra camera cable for Seagull #MAP-series triggers - your can extend the compatibility for othe...
View full details
Save 0%
Save %
Extend the compatibility for Seagull #MAPWith an extra camera cable for Seagull #MAP-series triggers - your can extend the compatibility for othe...
View full details
Save 0%
Save %
IR is an infrared camera trigger !Seagull #IR gives you control of your cameras shutter via infrared commands.#IR will work with Sony, Nikon, Canon...
View full details
Save 0%
Save %
#MAP2 is finally here! The second release of our popular trigger solution is finally here - now with 2 inputs and new features such as Sony QX1 K...
View full details
Save 0%
Save %
These 31mm props are just customed for 65mm brushless drones that has 1.0mm motor shaft. The recommended motor is 0603 motor, and 080X motor like 0...
View full details
Save 0%
Save %
Introducing the Crossfire Stock TX V2 Antenna! We have listened to your complaints and made it extremely durable. In the process, we managed to im...
View full details
Save 0%
Save %
1x Hex CAN or I2C bus splitter
Save 0%
Save %
Specification:Item Name: 5V Active Alarm Buzzer Beeper TrackerWorking Voltage: 5VQuantity: 5 pcsDimension: 6Pcs 9x5.5mm and 6Pcs 12x9.5mmWeight: 0....
View full details
Save 0%
Save %
Replacement IPS screen and touch panel for the Radiomaster TX16S transmitter. Has better contrast and wider viewing angles compared to the first ed...
View full details
Save 0%
Save %
Original RadioMaster SC + SD Switch Assembly Replacement Parts for TX16S TransmitterDescription:Brand Name: RadioMasterItem Name: SC + SD Switch As...
View full details
Save 0%
Save %
FrSKYs S.Port Tool Kit or STK enables configuration of your FrSKY S.Port receiver. The STK has two connecting ports, S.Port 1 (upper) Monitors, re...
View full details
Save 0%
Save %
This is a set of 8 aluminum standoffs (25mm). Threaded on both ends for a M3 screw. What's included8x aluminum 25mm standoffs Available in Blac...
View full details
Save 0%
Save %
This filter is a combination of a high quality tempered glass and a neutral density filter.Introducing the new & improved static cling tempered...
View full details
Save 0%
Save %
This filter is a combination of a high quality tempered glass and a neutral density filter.Introducing the new & improved static cling tempered...
View full details
Save 0%
Save %
Never lose or mix up a micro SD card again! Stores up to 10 SD cards in a credit-card sized cradle FPV is all about getting that footage after a...
View full details
Save 0%
Save %
Includes four (4) 7" spare arms for the SOURCE ONE HD carbon frame. Screws included.6mm Carbon Arms
Save 41%
Save %
OCDAY 4 in 1 Multi USB Charge HUB Battery Charger for DJI TELLO UAV The 4-in-1 battery charger is designed for Tello There are 4 interfaces in the ...
View full details
Save 0%
Save %
The Matek H7A3-SLIM Flight Controller features STM32H7A3VI, ICM20602 & MPU6000, DPS310, OSD, 7x UARTs, 2x I2C, 1xCAN, 13x PWM outputs, BEC5V an...
View full details
Save 0%
Save %
Tempered glass protector precisely cut for the Tango 2. Hassle free installation. The glass protector is made to fit the tango 2 screen window perf...
View full details
Save 0%
Save %
Springs can age over time, or get lost during repairs. This set includes the orirignal tight tension springs which come with your TBS Tango 2, and ...
View full details
Save 30%
Save %
Replacement Lite-Arms for the TBS Source PodRacer 5". Thickness: 5mmINCLUDES 4 x TBS Source PodRacer 5" - Spare Lite-Arms 1 x Screws set