support@flyingrobot.co.za
support@flyingrobot.co.za
Save up to 0%
Save %
This is a set of 8 aluminum tapered and textured standoffs (35mm). Threaded on both ends for a M3 screw. What's included8x aluminum 35mm standoffs...
View full details
Save 0%
Save %
Description The PowerWhoop Connector is here! These connectors are far superior to the current standard (Micro JST) and are easy to solder on. The...
View full details
Save 0%
Save %
1S 3.7V 2-Pin Battery Cable
Save 42%
Save %
This Set of leads makes charging 4 1s batteries possible using a conventional smart charger. More flying in less time. Go on, you know you want it.
Save 0%
Save %
2s Balance plug PH2 connector with wires
Save 0%
Save %
Specifications: Speed: 14,000KvOperating Voltage: 1.5-3.7VMax. Thrust: 15g Load Current at 3.7V: 2.0ADimensions:Diameter: 6mmLength: 15mmShaft Dia...
View full details
Save 0%
Save %
Genuine FrSky 3 way switch for the Taranis -long Specs: Weight: 4.5gDimensions: 12.7 x 7 x 43mmSwitch Positions: 3
Save 0%
Save %
Genuine FrSky 3 way switch for the Taranis - short Specs: Weight: 4.5gDimensions: 12.7 x 7 x 34mmSwitch Positions: 3
Save 0%
Save %
Genuine FrSky 2 way switch for the Taranis-long Specs: Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 2
Save 0%
Save %
Genuine FrSky momentary switch for the Taranis Specs Weight: 5.2gDimensions: 12.7 x 7 x 43mmSwitch Positions: 1
Save 0%
Save %
Size: M3 (3mm) Length: 16mm Available colors: Green, Red and Purple Includes: 8x M3x12mm screws
Save 0%
Save %
Size: M3 (3mm) Length: 12mm Available colors: Green and PurpleIncludes: 8x M3x12mm screws
Save up to 0%
Save %
Dimensions are as follows: Outer Diameter: 8mm Inner Diameter: 3mm Overall Height: 2mm Countersink Diameter: 5.5mm
Save 0%
Save %
These cables will give you more juice to your whoop! According to micro motor godfather Benedikt at Micro Motor Warehouse the stock battery pigtai...
View full details
Save 0%
Save %
Features Total voltage. Voltage of each cell individually. Percentage of the rest of total capacity. Percentage of the rest of capacity of each ...
View full details
Save 0%
Save %
TMotor bearings for F40/60 series motors Supplied 2 per bag to cover one motor.
Save 0%
Save %
A spare RPSMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.
Save 0%
Save %
A linear antenna with IPX / U.FL connector compatible with the TBS UNIFY PRO 5G8 HV or U.FL connector compatible Video transmitters. In conjuncti...
View full details
Save 51%
Save %
Seriously? How did you manage to break this Carbon bottom/middle plate? Anyway, no worry, here is a replacement one, same old stock standard carbon...
View full details
Save 42%
Save %
Charge 4 single-cell lipo batteries at once - with a regular hobby charger. This adapter is made with the finest ingredients and with great attenti...
View full details
Save 0%
Save %
A set of 2x HQ propellers, 2 blade props with 6mm hole. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets of 2 of the same...
View full details
Save 0%
Save %
SMA to SMA 45 degree connector and SMA to RPSMA
Save 30%
Save %
These XT60 connectors come pre-soldered to 4mm bullet connectors with silicone wire. Perfect as charger cables.