support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
Description:EZ folding landing gear is designed by Foxtech, which is not only compatible with Hover 1 quadcopter but also compatible with most sma...
View full details
Save 0%
Save %
Save 0%
Save %
Save 0%
Save %
Re-Formulated - Same Strength, Same Characteristics as original Vpoxy, Cures 25% FasterAs good as Aeropoxy but cures in 1/2 the time.Not for use wi...
View full details
Save 0%
Save %
The RadioMaster RP series of receivers are designed with size, ease of use and range in mind. Utilizing ExpressLRS 2.4ghz Open-source firmware the ...
View full details
Save 0%
Save %
Balance adapter plate allows a variety of LiPOs to be plugged in to an ultra power Charger, up to 12s.
Save 0%
Save %
The S.Port AirLink S is a connecting tool to help you program and flash firmware to devices such as the S6R/S8R. It can be used by inserting into t...
View full details
Save 0%
Save %
This is a 180A high precision watt meter and power analyzer with LCD backlight. The Analyzer can easily calculate the aircraft's voltage, curren...
View full details
Save 0%
Save %
Save 0%
Save %
Specifications: Dimension: 45*16*4mm (L*W*H) Weight: 7g Compatibility: All FrSky S.Port products Product Description: DIP switch 1 – Wireless ...
View full details
Save 0%
Save %
Save 30%
Save %
Foxeer Legend 2 Lens and Lens Module
Save 0%
Save %
The RadioMaster ER series of PWM receivers are based on the revolutionary ExpressLRS system. It offers high performance, high reliability, flexible...
View full details
Save up to 0%
Save %
Upgrading your drone has never been easier! Simply swap the props of your DJI Air 2S and within seconds you get up to 4% more flight time and up to...
View full details
Save 0%
Save %
Transform your Source One V5 into a long range cruiser in a deadcat configuration. 6mm thickness INCLUDES 2 x TBS Source One V5 7inch front arm...
View full details
Save 56%
Save %
Enjoy up to four charging ports when using the Battery Charging Hub with the Car Charger or Battery Charger. The Battery Charging Hub enhances effi...
View full details
Save 0%
Save %
4in1 Blheli_S, Dshot F10A
Save 0%
Save %
Save 0%
Save %
A slightly-directional antenna for best signal penetration. Built ultra-durable using lessons learned from TBS Triumph, and designed by none other ...
View full details
Save 0%
Save %
Helix ZX5 Arm Set - (4 Pack)
Save 0%
Save %
Get ultimate versatility with your DJI FPV Goggles. This Fat Shark receiver module adapter fits on the side of the DJI Digital FPV Goggles to give...
View full details
Save 30%
Save %
Overview: The 2195 high-altitude low-noise propeller can increase the maximum flight height of Matrice 300 RTK, so it is recommended for operatio...
View full details
Save 0%
Save %
Specifications Hall effect current sensor No voltage drop and heat on current sensor components Offset and Sensitivity are calibrated in factory C...
View full details
Save 0%
Save %
LightWare: ACC_USB_Serial Allows for easy connectivity of the LW20 and SF20 to a computer. Configure the LW20 or SF20, ensuring that the LiDAR is ...
View full details
Save 0%
Save %
LightWare: ACC.USB.000 Allows for easy connectivity of the SF000 to a computer. Configure the SF000, ensuring that the LiDAR is seamlessly integra...
View full details
Save 0%
Save %
LightWare: ACC.BOB.000 The SF000 breakout board is a handy little board that gives ease of connectivity to the SF000 to various platforms. Features...
View full details
Save 0%
Save %
This hoodie from ETHiX is designed to keep you warm on the coldest flying day, looking sharp on the street and all at a bargain price compared to ...
View full details3k twill matte T300 carbon fiber parts cnc cut as files, 2mm tickness,thickness tolerance:+/-0.15mm, cutting tolerance:+/0.15mm,2 countersink tanks...
View full details
Save 0%
Save %
Tattu R-Line 850mAh 14.8V 130C 4S1P Lipo Battery Pack with XT60 Plug has full capacity and discharge rate. It is a high discharge rate FPV racing l...
View full details
Save 0%
Save %
DescriptionEncoder (rotary position sensor) can be used with the SBGC32 controllers running regular or encoder firmware. It supports I2C connection...
View full details
Save 0%
Save %
Save 0%
Save %
Included 1 x TX16S Replacement HALL V3 Gimbal
Save 0%
Save %
Includes four (4) 7" spare arms for the SOURCE ONE HD carbon frame. Screws included.6mm Carbon Arms
Save 11%
Save %
Description Employing over 200 professional engineers and technicians and boasting over 20 years of design excellence, Gens Ace leads the hobby...
View full details