support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
The Flycolor X-Cross BL-32 ESCs are a high-powered addition to your FPV drone. The built-in 32-bit processor and BLHeli_32 firmware gives a quick r...
View full details
Save 0%
Save %
Hobbywing new waterproof UBEC voltage regulator module Input voltage: 3-14S Output voltage: 6/7.4/8.4V adjustable (use jumper adjustment/default o...
View full details
Save 0%
Save %
The TBS Crossfire Nano RX Pro is a higher telemetry output power option of the de-facto FPV standard receiver. It packs up to 500mW of output power...
View full details
Save 0%
Save %
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware. RM3100 sensor technology provides high re...
View full details
Save 0%
Save %
Description PM02D provides regulated power supply for your Pixhawk® 5X & 6X from the battery, as well as current consumption and battery volta...
View full details
Save 16%
Save %
About this product The VIFLY WhoopStor V3 6-Port is the first 1S Whoop Battery Charger with storage. The charge and discharge functions wi...
View full details
Save 0%
Save %
CubePilot iStand is specifically designed for Here 3, Here 3+ and Here 4 GPS 1 x Stand 1 x comes with screws and Nyloc nuts
Save 0%
Save %
TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering exp...
View full details
Save 0%
Save %
Shell for Tandem X20S in Black
Save 0%
Save %
A pair of hand tuned antennas to be used with the TBS Crossfire 8ch diversity receiver. SMA connector.
Save 0%
Save %
CAN-L4-BM is a ultra-precise digital power monitor based on TI INA239 & ArudPilot AP_Periph firmware. The resistance of this conductive path i...
View full details
Save 0%
Save %
DESCRIPTION Power module for The Cube (Pixhawk 2.1) This Power Moduleis a simple way of providing your PixHawk 2.1 with clean power from a LiPo ...
View full details
Save 0%
Save %
The Caddx Ratel 2 HDR Starlight 1200TVL FPV Camera features superb night vision, clear and sharper images. The Ratel 2 is equipped with high quali...
View full details
Save 0%
Save %
Set of two antennas. Works with every drone that operate in 2.4GHz & 5.8GHz. Concurrent dual band Ideal for VLOS 360 deg. radiation pattern
Save 0%
Save %
FrSky Archer Plus RS The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus Series...
View full details
Save 0%
Save %
FTDI USB to TTL serial cable Well suited to interfacing a RFD868 radio modem, or any other TTL level serial device to a PC via the USB port Spe...
View full details
Save 20%
Save %
Save 17%
Save %
NEXT GENERATION UPGRADE PROPELLERS for your DJI Mavic 3 and Mavic 3 Cine. Exceptional quality, low-noise and long flight time operation. Improved...
View full details
Save 0%
Save %
SPECIFICATIONS: KV: 1300KV Color: Black + Red No. of Cells (Lipo): 6S Configuration: 12N14P Stator Diameter: 28mm Stator Length: 8mm Propeller Sh...
View full details
Save 0%
Save %
The 900MHz R9 MM-OTA receiver implements the ACCESS protocol and brings the user improved performance and features. The R9 MM-OTA supports wireless...
View full details
Save 0%
Save %
TBS TRACER NANO RX FEATURES: 250Hz: Fastest available radio and telemetry link! Next generation 2.4GHz technology meets robust Crossfire radio engi...
View full details
Save 0%
Save %
Description:EZ folding landing gear is designed by Foxtech, which is not only compatible with Hover 1 quadcopter but also compatible with most sma...
View full details
Save 0%
Save %
Save 0%
Save %
Save 0%
Save %
Re-Formulated - Same Strength, Same Characteristics as original Vpoxy, Cures 25% FasterAs good as Aeropoxy but cures in 1/2 the time.Not for use wi...
View full details
Save 0%
Save %
It contains: I2C Cable x2 CAN Cable x2 BUZZER Cable x1 Telem Cable (GH-GH)x2 Power Brick Mini Cable x2 GPS1 GH Cable (with safety switch) x1
Save 0%
Save %
STROBON Lights are the most powerful navigation lights on the model market for years. These Cree Edition lights are brighter and coming in polycarb...
View full details
Save 0%
Save %
Balance adapter plate allows a variety of LiPOs to be plugged in to an ultra power Charger, up to 12s.
Save 0%
Save %
The S.Port AirLink S is a connecting tool to help you program and flash firmware to devices such as the S6R/S8R. It can be used by inserting into t...
View full details
Save 0%
Save %
This is a 180A high precision watt meter and power analyzer with LCD backlight. The Analyzer can easily calculate the aircraft's voltage, curren...
View full details
Save 0%
Save %