support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
FrSky Transmitter Stand for Taranis X9D X9DP X9DPSE X7 X7SDescription: Brand: FrSky Item Name: FrSky Transmitter Stand Package Included:1 x FrSky T...
View full details
Save 0%
Save %
Replacement cable for the data port on the TBS Unify Pro Evo video transmitter.
Save 0%
Save %
Details A set of 2 HQ propellers, 2 blade style with a 6mm center hub. They come with a set of plastic reducers (3,4,5,6 mm). A good prop for sma...
View full details
Save 30%
Save %
1 x Pair of carbon replacement arms for the ZMR250
Save 0%
Save %
Designed to interface with FTDI cables to program the RFD900/868ux You could also use it to connect the ux to other flight controllers Length : 1...
View full details
Save 0%
Save %
This adapter board is designed to fit the Nano Diversity RX like a glove, hassle free and easy soldering. With this board you can enable connectivi...
View full details
Save 0%
Save %
Forged from stainless steel, carved with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimensions ...
View full details
Save 0%
Save %
Designed by : Michael Anderson Made by: TBSDesigned to be small, light, and easy to use. You CANNOT expect full range from this antenna. In fact, ...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connecto...
View full details
Save 0%
Save %
Forged from stainless steel, with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimensions of the...
View full details
Save 0%
Save %
A linear antenna with IPX / U.FL connector compatible with the TBS UNIFY PRO 5G8 HV or U.FL connector compatible Video transmitters. In conjuncti...
View full details
Save 0%
Save %
Tempered glass protector precisely cut for the Tango 2. Hassle free installation. The glass protector is made to fit the tango 2 screen window perf...
View full details
Save 30%
Save %
2x FrenZy Outer Camera Pod Plates
Save 0%
Save %
1x JR servo lead 22AWG male to female 60cm
Save 0%
Save %
Forged from stainless steel, carved with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimension...
View full details
Save 0%
Save %
6 Position Switch
Save 0%
Save %
Glue-gun mini t/feed 20w-220v sabs
Save 41%
Save %
OCDAY 4 in 1 Multi USB Charge HUB Battery Charger for DJI TELLO UAV The 4-in-1 battery charger is designed for Tello There are 4 interfaces in the ...
View full details
Save 19%
Save %
2x Frenzy Brace
1x CL1 SpareTop Plate
Save 30%
Save %
4 x 4mm Carbon fibre arms Designed inhouse for the Cobra 22 size motors. To protect the bell housing on the motors from taking knocks. Compared ...
View full details
Save 82%
Save %
The DJI Battery to Power Bank Adapter for Mavic 2 Pro/Zoom/Enterprise Batteries allows you to transform your Intelligent Flight Batteries into high...
View full details
Save 0%
Save %
Propeller Diameter: 7inch Pitch : 5.5 Blades : 3Material : Poly Carbonate Weight : 10gHub Diameter :13mm Hub T...
View full details
Save 0%
Save %
This cable allows an RFD900ux or RFD868ux modem to be connected to the TELEM port on a PixHawk Carrier board, an external SBUS / PPM connection and...
View full details
Save 0%
Save %
Thin ElectricUse LPAR06E adapter ringsIncludes one set of rings from LPAR06EThe material is the same fiberglass composite used in our grey props, j...
View full details
Save 0%
Save %
Propeller Diameter: 8 inch Pitch : 4.5 Blades : 3Material : Carbon Reinforced Nylon Weight : 15.5gHub Diameter :18mm ...
View full details
Save 0%
Save %
Save 0%
Save %
Features: Motor wire protectors to prevent from prop strikes. There are different lengths for our iFlight BNFs: 65mm: F5D and F6D rear Arms Chim...
View full details
Save 0%
Save %
Details A set of 2 HQ propellers, 2 blade style with a 6mm center hub. They come with a set of plastic reducers (3,4,5,6 mm). A good prop for sma...
View full details
Save 0%
Save %
Propeller Diameter: 7 inch Pitch : 4 Blades : 3Material : Glass Fiber Reinforced Nylon Weight : 10.3gHub Diameter :13mm ...
View full details
Save up to 0%
Save %
A set of 2x HQ propellers, 2 blade props with 6mm hole. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets of 2 of the same...
View full details