support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...
View full details
Save 0%
Save %
Soldering flux is used before and during soldering to prevent oxidation and create better, cleaner solder joints. This flux type: NC-559-ASM-UV is ...
View full details
Save 0%
Save %
Propeller Diameter: 7.5inch Pitch : 3 Blades : 3Material : Poly Carbonate Weight : 10.9gHub Diameter :14mm Hub...
View full details
Save 0%
Save %
Propeller Diameter: 10 inch Pitch : 5 Blades : 2Material : Glass Fiber Reinforced Nylon Weight : 16gHub Diameter :15mm ...
View full details
Save up to 0%
Save %
Save up to 0%
Save %
Titan VTOL Front wing spar
Titan VTOL Tail Boom
Save 0%
Save %
Thin ElectricUse LPAR06E adapter ringsIncludes one set of rings from LPAR06EThe material is the same fiberglass composite used in our grey props, j...
View full details
Save 0%
Save %
Thin ElectricUse LPAR06E adapter ringsIncludes one set of rings from LPAR06EThe material is the same fiberglass composite used in our grey props, j...
View full details
Save 0%
Save %
Folded fiberglass blades of the German company Aero-Naut for electric models. size: 12.5x10 / 32x25.5 cm blade shaft hole: 3 mm fitting width: 8 mm
Save 0%
Save %
Folded fiberglass blades of the German company Aero-Naut for electric models. size: 13.5x7 / 34x18 cm blade shaft hole: 3 mm fitting width: 8 mm
Save 0%
Save %
Folded fiberglass blades of the German company Aero-Naut for electric models. size: 12x7 / 30.5x18 cm blade shaft hole: 3 mm fitting width: 8 mm
Save 0%
Save %
LightWare: HPN-3795-1 295mm Communication cable for SF000
Save 0%
Save %
Details The replacement QAV-SKITZO Dark Matter FPV Freestyle Quadcopter Arm Bottom Plate made of 3mm thick 3k carbon fiber. Specifications Weig...
View full details
Save 0%
Save %
Description Item: 25T-6B Aluminium Servo Arm Material: Aluminium Usage: Compatible with Graupner, Align, Futaba, Servoking, KST, BK Standard 25T S...
View full details
Save up to 30%
Save %
Quad Standard Labs 85mm Ducts were designed by Andy Shen and utilize the QSL ShenProp 85mm x 6 Propeller to convert just about any drone frame that...
View full details
Save 0%
Save %
Set of 2pcs flexible stick-on dipole antennas for medium performance but ultra high durability and sleek form factor. For Tiny Whoops, small wings...
View full details
Save 0%
Save %
FrSky Transmitter Stand for Taranis X9D X9DP X9DPSE X7 X7SDescription: Brand: FrSky Item Name: FrSky Transmitter Stand Package Included:1 x FrSky T...
View full details
Save 0%
Save %
Replacement cable for the data port on the TBS Unify Pro Evo video transmitter.
Save 30%
Save %
1 x Pair of carbon replacement arms for the ZMR250
Save 0%
Save %
This adapter board is designed to fit the Nano Diversity RX like a glove, hassle free and easy soldering. With this board you can enable connectivi...
View full details
Save 0%
Save %
Forged from stainless steel, carved with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimensions ...
View full details
Save 0%
Save %
Designed by : Michael Anderson Made by: TBSDesigned to be small, light, and easy to use. You CANNOT expect full range from this antenna. In fact, ...
View full details
Save 0%
Save %
4-pin CAN and I2C cable to connect sensors and accessories. This is a JST-GH 4 pin to JST-GH 4 pin cable. JST-GH is a low insertion force connecto...
View full details
Save 0%
Save %
Forged from stainless steel, with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimensions of the...
View full details
Save 0%
Save %
A linear antenna with IPX / U.FL connector compatible with the TBS UNIFY PRO 5G8 HV or U.FL connector compatible Video transmitters. In conjuncti...
View full details
Save 0%
Save %
Tempered glass protector precisely cut for the Tango 2. Hassle free installation. The glass protector is made to fit the tango 2 screen window perf...
View full details
Save 30%
Save %
2x FrenZy Outer Camera Pod Plates
Save 0%
Save %
1x JR servo lead 22AWG male to female 60cm
Save 0%
Save %
Forged from stainless steel, carved with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimension...
View full details
Save 0%
Save %
6 Position Switch
Save 0%
Save %
Glue-gun mini t/feed 20w-220v sabs
Save 41%
Save %
OCDAY 4 in 1 Multi USB Charge HUB Battery Charger for DJI TELLO UAV The 4-in-1 battery charger is designed for Tello There are 4 interfaces in the ...
View full details
Save 19%
Save %
2x Frenzy Brace
1x CL1 SpareTop Plate
Save 30%
Save %
4 x 4mm Carbon fibre arms Designed inhouse for the Cobra 22 size motors. To protect the bell housing on the motors from taking knocks. Compared ...
View full details
Save 82%
Save %
The DJI Battery to Power Bank Adapter for Mavic 2 Pro/Zoom/Enterprise Batteries allows you to transform your Intelligent Flight Batteries into high...
View full details
Save 0%
Save %
Propeller Diameter: 7inch Pitch : 5.5 Blades : 3Material : Poly Carbonate Weight : 10gHub Diameter :13mm Hub T...
View full details
Save 0%
Save %
This cable allows an RFD900ux or RFD868ux modem to be connected to the TELEM port on a PixHawk Carrier board, an external SBUS / PPM connection and...
View full details
Save 0%
Save %
Thin ElectricUse LPAR06E adapter ringsIncludes one set of rings from LPAR06EThe material is the same fiberglass composite used in our grey props, j...
View full details
Save 0%
Save %
Propeller Diameter: 8 inch Pitch : 4.5 Blades : 3Material : Carbon Reinforced Nylon Weight : 15.5gHub Diameter :18mm ...
View full details