support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
2s Balance plug PH2 connector with wires
Save 44%
Save %
White plastic replacement frame for the DYS ELF micro brushless drone.
Save 0%
Save %
WHY NANO?The Nano TX is designed to be installed in X-lite and X9D Lite radios with the "Lite" interface. Performance, functionalities, and even pr...
View full details
Save 42%
Save %
This Set of leads makes charging 4 1s batteries possible using a conventional smart charger. More flying in less time. Go on, you know you want it.
Save 0%
Save %
Propeller Diameter : 1.38 inch (35mm) Pitch : 1 Blades : 3Material : Poly Carbonate Weight : 0.31gHub Diamet...
View full details
Save 0%
Save %
This is a set of 8 nylon standoffs, in a hexagonal shape (35mm). Threaded on both ends for a M3 screw.What's included8x nylon 35mm standoffs
Save 29%
Save %
Replacement canopy for the DYS ELF micro drone.
Save 0%
Save %
The Mateksys Digital Airspeed Sensor ASPD-4525 features a ASPD-4525 sensor board, JST-GH to JST-GH 20cm silicon cable, pitot tube and a clear sili...
View full details
Save 0%
Save %
The Tandem (TD) dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequ...
View full details
Save 0%
Save %
RC Pro Plus has been at the forefront of battery connector development for years. Providing high quality, and high reliability, RCPP has quickly be...
View full details
Save 43%
Save %
Propeller Diameter: 5 inch Pitch : 2 Blades : 3Material : Poly Carbonate Weight :2.5gHub Diameter : 9.8mm Hub...
View full details
Save 0%
Save %
The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus Series receivers include ...
View full details
Save 0%
Save %
TX16s Replacement SF + SE Switch Assembly
Save 0%
Save %
The new features of F405-mini TE compared with F722-mini SE(EOL) F405 has 1MB flash which can run with ArduPilot. even with INAV firmware, some ...
View full details
Save 0%
Save %
This is an individual replacement Taoglas antenna for the herelink air unit.
Save 0%
Save %
Propeller Diameter: 85MM Pitch : 3 Blades : 6Material : Poly Carbonate Weight :3.5gHub Diameter : 11mm Hub Th...
View full details
Save 0%
Save %
High quality flexible pure copper and silicone wire. Specifications Gauge: 6awg Length: 1 meter Ships in 1 meter lengths individually bagged Co...
View full details
Save 0%
Save %
Direct solder Dipole antenna
Save 42%
Save %
A pair of gloss white module doors for the ImmersionRC rapidFire Receiver. This version comes in gloss white to match many versions of Fat Shark go...
View full details
Save 0%
Save %
This is a bundle set of JST GH 1.25 connectors and pre-crimped silicone wires. With the kit, you will be able to build your own custom cables, rang...
View full details
Save 0%
Save %
DESCRIPTION Power module for The Cube (Pixhawk 2.1) This Power Moduleis a simple way of providing your PixHawk 2.1 with clean power from a LiPo ...
View full details
Save 0%
Save %
Details Upgrade your Taranis Q X7 with this plug-n-play high resolution M7 Gimbal from FrSky. The highly sensitive Hall sensors will not wear out ...
View full details
Save 0%
Save %
The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus Series receivers include ...
View full details
Save 0%
Save %
Propeller Diameter: 89MM Pitch : 3 Blades : 8Material : Poly Carbonate Weight :3.9gHub Diameter : 11.9mm Hub ...
View full details
Save 0%
Save %
The Ethernet Cable design for Herelink v1.1 Air Unit. Cable Length : 15cm
Save 0%
Save %
Propeller Diameter: 6 inch Pitch : 3 Blades : 3Material : Poly Carbonate Weight : 5.87gHub Diameter : 13.2mm ...
View full details
Save 41%
Save %
Four Velcro straps with metal loop 16cm long 2cm wide
Save 0%
Save %
The Nano-Nano board was designed to allow you to mount your Team BlackSheep Unify Pro Nano VTX in your stack for cleaner builds. This board includ...
View full details
Save 0%
Save %
Propeller Diameter: 7 inch Pitch : 5 Blades : 3Material : Poly Carbonate Weight : 8.8gHub Diameter :14mm Hub ...
View full details
Save 0%
Save %
New version with SD card slot and Ethernet port. Contains Air Unit Only: Appearance: core board + video daughter board + structure of RF daughter...
View full details
Save 0%
Save %
1x 10cm RPSMA Male to Right Angle RPSMA Female
Save 0%
Save %
1 x Male Connector,1 x Female Connector,2 x Wire Guiding Sleeves
Save 0%
Save %
Sometimes you got that special project with special screws you dont have bits for.This 24bits kit might just be the lifesafer . Any workbench shoul...
View full details
Save 0%
Save %
The Lipo Killer discharges old or damaged batteries you wish to dispose of down to 0v. This eliminates all charge from the battery and makes the pa...
View full details
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (23mm). Threaded on both ends for a M2 screw.What's included4x aluminum 23mm standoff...
View full details
Save 0%
Save %
Propeller Diameter: 2.9inch Pitch : 2.9 Blades : 4Material : Poly Carbonate Weight :1.77gHub Diameter : 11mm ...
View full details
Save 0%
Save %
A spare RPSMA pigtail for the TBS Unify PRO 5G8. A quick solder and you're good to go.
Save 0%
Save %
A linear antenna with MMCX connector. SPECS Weight: 1.8grams Length: approximately 102mm (include shrink tube) Width: 1.79mm
Save 0%
Save %
FrSky Archer Plus R8 The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus Serie...
View full details
Save 0%
Save %
Includes: 1 x XT90E Male 1 x XT90H Female 2 x Screws 2 x Nuts
Description 8pcs pack of Stainless Steel button head hex screws. M3 Screw 30MM Length
Save 0%
Save %
Save 0%
Save %
RadioMaster - TX16s Replacement SA + SB Switch Assembly
Save 0%
Save %
PLA Ultra is premium grade of 3D printing filament, which has a higher heat deflection, impact strength and improved durability. Therefore making P...
View full details
Save 0%
Save %
Replacement FrSky Transmitter Q X7 Antenna Select Black or White from the drop down menu
Save up to 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (30mm). Threaded on both ends for a M2 screw.What's included4x aluminum 30mm standoff...
View full details
Save 0%
Save %
This hoodie from ETHiX is designed to keep you warm on the coldest flying day, looking sharp on the street and all at a bargain price compared to ...
View full details
Save 0%
Save %
They come in sets of 2 of the same direction propellers. You will need to order 1 pair of Standard props and 1 pair of Reverse props for a full se...
View full details