support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
Amass XT30UD Male and Female pair Max voltage: DC 500V Rated current: 15A Instantaneous current: 30A Contact resistance: 1.20mΩ Insulation...
View full details
Save 0%
Save %
Propeller Diameter: 4 inch Pitch : 2.5 Blades : 2Material : Poly Carbonate Weight :1.45gHub Diameter : 9.8mm ...
View full details
Save 0%
Save %
The Mateksys CAN-L431 is an Adapter Node based on ArudPilot AP_Periph firmware. With this board, you can easily utilize the ArduPilot driver li...
View full details
Save 0%
Save %
FC Specifications MCU: STM32F405RGT6, 168MHz , 1MB Flash IMU: ICM42688-P Baro: SPL06-001 OSD: AT7456E Blackbox: 16M Flash 5x UARTs, 1x Softserial...
View full details
Save 0%
Save %
The set includes the following: 1 x Reverse action (clamps when released) 1 x Needle point 1 x Duck bill needle point 1 x Duck bill flat point F...
View full details
Save 0%
Save %
Features : Increases bit life of the soldering iron by up to 10 times 1.0mm Roson coil solder 60 tin /40 led Supplied in handy dispenser
Save 0%
Save %
Save 0%
Save %
Larger Pitot Tube Screw mounting with tube Specifications Pitot Tube M3x10 screws 1m Tube
Save up to 0%
Save %
Upgrading your drone has never been easier! Simply swap the props of your DJI Air 2S and within seconds you get up to 4% more flight time and up to...
View full details
Save 0%
Save %
Rated voltage: DC500V Rated current: 30A Peak current: 60A Contact Resistance: 0.50mΩ Metal material: Brass, gold plated Plastic material: PA...
View full details
Save 0%
Save %
FrSky Transmitter Stand for Taranis X9D X9DP X9DPSE X7 X7SDescription: Brand: FrSky Item Name: FrSky Transmitter Stand Package Included:1 x FrSky T...
View full details
Save 0%
Save %
This is a set of 8 nylon standoffs, in a hexagonal shape (25mm). Threaded on both ends for a M3 screw.What's included8x nylon 25mm standoffs
45°throttle travel for quick throttle response Hall sensor 4 ball-bearings Adjustable tension Ideal for FPV RACING, 3D and acrobatic fixed wing, 3...
View full details
Save 0%
Save %
They come in sets of 2 of the same direction propellers. You will need to order 1 pair of Standard props and 1 pair of Reverse props for a full se...
View full details
Save 0%
Save %
A set of 4 HQ Prop propellers, 3 blade style with a 6mm center hub. A good prop for small planes and multi-rotors. Rotation: CW and CCW Length: ...
View full details
Save 58%
Save %
Spare parts for the QX90 Microquad frame. Included: 4 x Motor grommets 1 x Buzzer 1 x Power Cable 6 x Nylon standoffs 1 x Upper Board 1 x Pack of ...
View full details
Save 30%
Save %
This filter improves video reception for 1.2-1.3GHz video receivers in combination with TBS Crossfire. Due to the poor filtering on the video anten...
View full details
Save 0%
Save %
Propeller Diameter: 6 inch Pitch : 3 Blades : 3Material : Poly Carbonate Weight : 5.4gHub Diameter :13.2mm H...
View full details
Save 0%
Save %
Package Includes:1. 3P2.54mmpitch 100mm cable*12. 6P 1.25mmpitch 150mm cable*23. 4P 1.25mmpitch 150mm cable*14. Buzzer *15. Safety switch...
View full details
Save 0%
Save %
Features / Specs Frequency Range: 2.4GHz / 5GHz / 5.8GHz Gain: 6dBi SWR: ≤1.5 Impedance: 50 Ohms Material: Black ABS Housing / Gold Plated Copper ...
View full details
Save 0%
Save %
FrSky Taranis 2.4g 250mm receiver antenna- Ipex 4 small type connector Specifications: Brand Name: FrSky Item Name: FrSky 250mm Antenna Length: 2...
View full details
Save 0%
Save %
Never lose or mix up a micro SD card again! Stores up to 10 SD cards in a credit-card sized cradle FPV is all about getting that footage after a...
View full details
Save 0%
Save %
Connector Type: 3 pin 3.5mm bullet plug. Weight: 9.6g per pair (including sleeves).
Save 0%
Save %
Description 8pcs pack of Stainless Steel button head hex screws. M3 Screw 25MM Length