support@flyingrobot.co.za
support@flyingrobot.co.za
Save up to 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (20mm). Threaded on both ends for a M2 screw.What's included4x aluminum 20mm standoff...
View full details
Save 0%
Save %
Package Includes: 3 x 6 to 6 pin cable (power) 2 x 4 to 4 pin cable (CAN) 1 x 6 to 4 pin cable (Data) 2 x 10 to 10 pin cable (PWM) 1 x 8 to 8 pin ...
View full details
Save 0%
Save %
Features Wide 9V to 55V Operating Input Range with TVS protection 3x Output voltage options, 5.2V, 8V or 12V. Default 5.2V. Synchronous switchin...
View full details
Save 0%
Save %
Features: - Compatible with all USB Type-C powered hardware or cameras (GoPro Hero 5/6/7/8/9, Insta360, etc.)- Stable power supply from any LiPo ...
View full details
Save 0%
Save %
The Archer SR8 PRO are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer, they have 8 high-precision PWM channel...
View full details
Save 0%
Save %
Specifications MCU: 168MHz STM32F405RGT6 IMU: ICM42688-P (SPI) Baro: SPL06-001 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD slot (SPI) 6x UARTs, 1x...
View full details
Save 0%
Save %
Brand: Amass (Original Manufacturer) Body Material and Surface Plating: Brass and gold plated Insulation Material: PA66 Original Internal Resista...
View full details
Save 41%
Save %
OCDAY 4 in 1 Multi USB Charge HUB Battery Charger for DJI TELLO UAV The 4-in-1 battery charger is designed for Tello There are 4 interfaces in the ...
View full details
Save 0%
Save %
*IMPORTANT NOTEWe have discovered that XJT mini modules are using a pin that we did not anticipate for use in our module bay. It appears that the X...
View full details
Save 0%
Save %
1S 3.7V 2-Pin Battery Cable
Save 0%
Save %
NOTE: M4 (4mm) Fits both M7 and M9 Hall Sensor Gimbals Details FrSky CNC machined Aluminum Gimbal Stick Ends for Transmitter Stick with anti-locki...
View full details
Save 0%
Save %
Propeller Diameter:2inch Pitch :2 Blades : 3Material : Poly Carbonate Weight :0.75gHub Diameter : 10mm Hub Thick...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-I Quantity: 1Pc Length: approx. 103...
View full details
Save 0%
Save %
TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering exper...
View full details
Save 0%
Save %
300 pcs. 2mm hardware for your 2" and 3" builds Contains: 80x M2 Nut 80x M2x6mm screw 20x 6mm standoff and 6mm stud 20x 8mm standoff and 6mm stud ...
View full details
Save 0%
Save %
These 31mm props are just customed for 65mm brushless drones that has 1.0mm motor shaft. The recommended motor is 0603 motor, and 080X motor like 0...
View full details
Save 0%
Save %
Size: 10mm Colour: Black
Save 0%
Save %
Description: Brand Name: AmassItem Name: XT60+Body Material: Gold-plated copperInternal Material: Nylon/PAInternal Resistance: 0.8mΩMax. RC/MC: 60A...
View full details
Save 0%
Save %
Product Description About Cube Orange+ An integrated and single board/box all-in-one flight controller Provide sufficient interfaces...
View full details
Save 6%
Save %
These Micro GPS uses multi-constellation GNSS powered by u-blox M10, a concurrent GNSS receiver which can receive and track multiple GNSS systems. ...
View full details
Save 0%
Save %
This antenna is equipped with a balun. that is the black cylinder at the end of the antenna. The balun helps the antenna work more efficiently by r...
View full details
Save 0%
Save %
A replacement trim switch for the FrSky X9D Transmitter.
Save up to 30%
Save %
Quad Standard Labs 85mm Ducts were designed by Andy Shen and utilize the QSL ShenProp 85mm x 6 Propeller to convert just about any drone frame that...
View full details
Save 0%
Save %
Details A set of 2 HQ propellers, 2 blade style with a 6mm center hub. They come with a set of plastic reducers (3,4,5,6 mm). A good prop for sma...
View full details