support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
The Pix32 v6 is the latest update to the pix32 v5 flight controllers. It is a variant of the Pixhawk 6C. It is comprised of a separate flight contr...
View full details
Save 10%
Save %
The Pix32 v6 is the latest update to the pix32 v5 flight controllers. It is a variant of the Pixhawk 6C. It is comprised of a separate flight contr...
View full details
Sold out
Package Includes: 3 x 6 to 6 pin cable (power) 2 x 4 to 4 pin cable (CAN) 1 x 6 to 4 pin cable (Data) 2 x 10 to 10 pin cable (PWM) 1 x 8 to 8 pin ...
View full details
Save 0%
Save %
Package Includes: 1、6 to 6 pin cable 26AWG L=150mm N.W=2.2g (power) *2 2、4 to 4 pin cable 26AWG L=150mm N.W=1.4g (CAN) *13、6 to 6 pin&a...
View full details
Sold out
The Pixhawk® 6C is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connec...
View full details
Sold out
The Pixhawk® 6C Mini is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and C...
View full details
Save 0%
Save %
Propeller Diameter: 5inch Pitch : 3.7 Blades : 3Material : Poly Carbonate Weight :4gHub Diameter :13.3mm Hub Th...
View full details
Save 0%
Save %
Description PM02D provides regulated power supply for your Pixhawk® 5X & 6X from the battery, as well as current consumption and battery volta...
View full details
Save 0%
Save %
Feature Supports 2-14S & 200A Cont, 400A Burst DroneCAN Communication Protocol Small & Compact Design Two 5V Output with Independent BEC...
View full details
Save 0%
Save %
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board ...
View full details
Sold out
The compact (0.4″ × 0.5″) D24V5F3 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 3.3 V while...
View full details
Save 0%
Save %
Specs:Operating Voltage: 12VDCPower: 30WPower Plug: XT60
Save 0%
Save %
DESCRIPTION Power module for The Cube (Pixhawk 2.1) This Power Moduleis a simple way of providing your PixHawk 2.1 with clean power from a LiPo ...
View full details
Sold out
The Power Management Board (PM Board) serves the purpose of a Power Module as well as a Power Distribution Board. In addition to providing regulate...
View full details
Sold out
Description: PM02 is a simple way of providing your APM and Pix32 with clean power from a LiPo battery as well as current consumption and battery v...
View full details
Sold out
Product DescriptionPower inputs must be between 4.4v and 5.7vPower output is the same voltage as the selected input.Power can be taken off the PSM ...
View full details
Save 0%
Save %
Power Whoop Connector plug - Male PWC (ph2) with 10cm wire
Save 0%
Save %
Description The PowerWhoop Connector is here! These connectors are far superior to the current standard (Micro JST) and are easy to solder on. The...
View full details
Save 0%
Save %
The RadioMaster Pocket is a small, lightweight radio that packs a big punch. It is available in two versions, ExpressLRS and MPM CC2500, and both...
View full details
Sold out
Helps Removes Props.
Sold out
Description M5 prop tool with one-way bearing. Suitable for all 8mm nuts, works like a ratchet and ultra convenient. You've never been so fast ta...
View full details
Sold out
Spare Parts-X500 V2 Kit
Save 0%
Save %
Details The replacement QAV-SKITZO Dark Matter FPV Freestyle Quadcopter Arm Bottom Plate made of 3mm thick 3k carbon fiber. Specifications Weig...
View full details