support@flyingrobot.co.za
support@flyingrobot.co.za
Save up to 0%
Save %
Individual M3 nylon hex nuts
10x M3 rubber O ring for FC. H-1mm OD-5mm
Save 0%
Save %
8x M3 10mm screws
Save 0%
Save %
8x M3 12mm
Save 0%
Save %
Size: M3 (3mm) Length: 12mm Available colors: Green and PurpleIncludes: 8x M3x12mm screws
Save 0%
Save %
Size: M3 (3mm) Length: 16mm Available colors: Green, Red and Purple Includes: 8x M3x12mm screws
Save 0%
Save %
M5 aluminium CCW / Left Hand / Reverse Loc Nuts with flange Pack of 4 Individual anodized aluminum M5 flanged nylon lock nuts. Includes 4x M...
View full details
Sold out
M5 aluminium CW / Right Hand / Normal Loc Nuts with flange Pack of 4 Individual anodized aluminum M5 flanged nylon lock nuts. Includes 4x M5...
View full details
Save 0%
Save %
M5 aluminium CW / Right Hand / Normal Loc Nuts Pack of 4 Individual anodized aluminum M5 nylon lock nuts. Includes 4x M5 Aluminum CW Nylock Nut ...
View full details
Save 0%
Save %
M5 aluminium CCW / Left Hand / Reverse Low Profile Loc Nuts with flange Pack of 4 Individual anodized aluminum M5 flanged nylon lock nuts. I...
View full details
Save 0%
Save %
M5 aluminium CW / Right Hand / Normal Low Profile Loc Nuts with flangePack of 4 Individual anodized aluminum M5 flanged nylon lock nuts. Incl...
View full details
Sold out
X Power Propellers for Unprecedented Performance Designed for high speed and ultimate performance, the X Power Propeller Series creates a c...
View full details
Save up to 0%
Save %
Upgrading your drone has never been easier! Simply swap the props of your DJI Air 2S and within seconds you get up to 4% more flight time and up to...
View full details
Save 17%
Save %
NEXT GENERATION UPGRADE PROPELLERS for your DJI Mavic 3 and Mavic 3 Cine. Exceptional quality, low-noise and long flight time operation. Improved...
View full details
Sold out
If you are looking for an easy way to add some bling to your quadcopter drone, then the Matek 2812 LED controller is an ideal option. for a number...
View full details
Save 0%
Save %
Matek anti-vibration bobbins for Flight Controllers M3 x 7mm + 4.5mm 4pcs
Save 0%
Save %
CAN-L4-3100 is a professional grade CAN Magnetometer based on RM3100 & ArudPilot AP_Periph firmware. RM3100 sensor technology provides high re...
View full details
Save 0%
Save %
CAN-L4-RC is an Adapter Node based on ArudPilot AP_Periph firmware. Using this adapter to turn Serial receiver into CAN receiver. Specifications ...
View full details
Save 0%
Save %
Features Wide 9V to 55V Operating Input Range with TVS protection 3x Output voltage options, 5.2V, 8V or 12V. Default 5.2V. Synchronous switchin...
View full details
Save 0%
Save %
CRSF-PWM Converter, CRSF-PWM-6 Compatible with CRSF protocol receiver only Support any CRSF protocol receivers (including 433MHz, 868MHz, 915MHz, ...
View full details
Save 0%
Save %
Specifications Sensor: All sensors DLVR-L10D, Industrial temperature range DLVR-L10D Sensor datasheet, pls visit www.allsensors.com Interface:...
View full details
Save 0%
Save %
The Mateksys Digital Airspeed Sensor ASPD-4525 features a ASPD-4525 sensor board, JST-GH to JST-GH 20cm silicon cable, pitot tube and a clear sili...
View full details
Save 0%
Save %
The Matek 1.2-1.3Ghz Antenna is one of the most durable and well-made antenna designs on the market today. When you use it we are confident you wi...
View full details
Sold out
Specifications Compatible with CRSF/SBUS protocol receiver. Support CRSF to SBUS, or SBUS to CRSF conversion Battery voltage(RxBt) telemetry over...
View full details
Sold out
Specifications Power dissipation: 45mA(binding), 85mA(wifi mode) RF Frequency: 2.4GHz (2400~2480MHz) Input voltage: 4~9V DC @ 5V pad Receiver pro...
View full details
Sold out
ExpressLRS firmware, 2.4GHz, 7x PWM outputs, Variometer sensor integrated. Specific for the Gliders and other fixed-wings. Small in form factor, ...
View full details
Sold out
Perfect for wings and planes, the Matek F405 HDTE FC will work with whatever firmware you would like. Betaflight, INAV, and Ardupilot are all comp...
View full details
Save 0%
Save %
Specifications MCU: 168MHz STM32F405RGT6 IMU: ICM42688-P (SPI) Baro: SPL06-001 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD slot (SPI) 6x UARTs, 1x...
View full details
Save 0%
Save %
FC Specifications MCU: STM32F405RGT6, 168MHz , 1MB Flash IMU: ICM42688-P Baro: SPL06-001 OSD: AT7456E Blackbox: 16M Flash 5x UARTs, 1x Softserial...
View full details
Save 0%
Save %
4x Matek FC Anti Vibration Standoffs M2
Save 0%
Save %
The new features of F405-mini TE compared with F722-mini SE(EOL) F405 has 1MB flash which can run with ArduPilot. even with INAV firmware, some ...
View full details
Sold out
M10-5883 uses multi-constellation GNSS powered by u-blox MAX-M10S. MAX-M10S supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and...
View full details
Save 0%
Save %
M9N-5883 uses multi-constellation GNSS powered by u-blox NEO-M9N , NEO-M9N is a concurrent GNSS receiver which can receive and track multiple GNS...
View full details
Sold out
Matek M8Q-5883 GPS and Compass Module perfect for fixed wing using iNAV.A Very small size GPS module perfect for when your restricted for room a...
View full details
Save 0%
Save %
Matek's H743-WING V3 Flight Controller arrives with new features and improvements over the original. This FC features a STM32H743VIT6 MCU running ...
View full details
Save 0%
Save %
The Matek H7A3-SLIM Flight Controller features STM32H7A3VI, ICM20602 & MPU6000, DPS310, OSD, 7x UARTs, 2x I2C, 1xCAN, 13x PWM outputs, BEC5V an...
View full details