support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
Descriptions. This cable conects betweeen any PL-xxx sensor to the Hub X2-V2, or any BEC from from the PL and PC Series.
Save 0%
Save %
Larger Pitot Tube Screw mounting with tube Specifications Pitot Tube M3x10 screws 1m Tube
Save 0%
Save %
PREORDERS OPEN NOW - Stock arriving 23 April 2019 Set of four arms for the Micro Alien Frame Can use up to a 3" prop with these arms.
Save 6%
Save %
These Micro GPS uses multi-constellation GNSS powered by u-blox M10, a concurrent GNSS receiver which can receive and track multiple GNSS systems. ...
View full details
Save 0%
Save %
Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every version of the Cube flight controller. With smaller...
View full details
Save 0%
Save %
Video cable for DJI O3 air unit.
Save 0%
Save %
MMCX 90 Deg male to MMCX Straight Male 8cm lead
Save 0%
Save %
Features: Motor wire protectors to prevent from prop strikes. There are different lengths for our iFlight BNFs: 65mm: F5D and F6D rear Arms Chim...
View full details
Save 0%
Save %
Specification Weight: 9.5g/pair Type:JX-9 Metal Material: Brass Gold Plated Plastic Material: PA Instantaneous current: (big) 60A/(Small) 7A Rated ...
View full details
Save 0%
Save %
Brand: Amass (Original Manufacturer) Body Material and Surface Plating: Brass and gold plated Insulation Material: PA66 Original Internal Resista...
View full details
Save 0%
Save %
Rated voltage: DC500V Rated current: 30A Peak current: 60A Contact Resistance: 0.50mΩ Metal material: Brass, gold plated Plastic material: PA...
View full details
Save 0%
Save %
Connector Type: 3 pin 3.5mm bullet plug. Weight: 9.6g per pair (including sleeves).
Save 0%
Save %
Save 0%
Save %
Details A set of 2 HQ propellers, 2 blade style with a 6mm center hub. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets ...
View full details
Save 0%
Save %
This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...
View full details
Save 0%
Save %
The frame features a traditional look and geometry to maintain the flight characteristics familiar to users, ensuring easy compatibility with the B...
View full details8 x 5mm black nylon hex M3 standoffs
Save 0%
Save %
8 x 10mm black nylon hex M3 standoffs
Save 0%
Save %
Quality Deans connectors
Save 0%
Save %
ORT Micro Vee Linear 5.8GHz Antenna U.FL (5cm Tired of getting mediocre performance from your default antenna AIO micro camera/VTX? Try the ORT Mic...
View full details
Save 0%
Save %
2 x Samsung 30Q Li-ion INR 18650 Batteries Buy in pairs and save Huge Capacity = Less Charging With a 3000mAH capacity that makes other 18650s look...
View full details
Save 0%
Save %
2s Balance plug PH2 connector with wires
Save 0%
Save %
Package Includes:1. 3P2.54mmpitch 100mm cable*12. 6P 1.25mmpitch 150mm cable*23. 4P 1.25mmpitch 150mm cable*14. Buzzer *15. Safety switch...
View full details
Save 0%
Save %
The Pix32 v6 is the latest update to the pix32 v5 flight controllers. It is a variant of the Pixhawk 6C. It is comprised of a separate flight contr...
View full details
Save 10%
Save %
The Pix32 v6 is the latest update to the pix32 v5 flight controllers. It is a variant of the Pixhawk 6C. It is comprised of a separate flight contr...
View full details
Save 0%
Save %
Package Includes: 3 x 6 to 6 pin cable (power) 2 x 4 to 4 pin cable (CAN) 1 x 6 to 4 pin cable (Data) 2 x 10 to 10 pin cable (PWM) 1 x 8 to 8 pin ...
View full details
Save 0%
Save %
Package Includes: 1、6 to 6 pin cable 26AWG L=150mm N.W=2.2g (power) *2 2、4 to 4 pin cable 26AWG L=150mm N.W=1.4g (CAN) *13、6 to 6 pin&a...
View full details
Save 0%
Save %
Propeller Diameter: 5inch Pitch : 3.7 Blades : 3Material : Poly Carbonate Weight :4gHub Diameter :13.3mm Hub Th...
View full details
Save 0%
Save %
Description PM02D provides regulated power supply for your Pixhawk® 5X & 6X from the battery, as well as current consumption and battery volta...
View full details
Save 0%
Save %
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board ...
View full details
Save 0%
Save %
Specs:Operating Voltage: 12VDCPower: 30WPower Plug: XT60
Save 0%
Save %
DESCRIPTION Power module for The Cube (Pixhawk 2.1) This Power Moduleis a simple way of providing your PixHawk 2.1 with clean power from a LiPo ...
View full details
Save 0%
Save %
The Power Management Board (PM Board) serves the purpose of a Power Module as well as a Power Distribution Board. In addition to providing regulate...
View full details
Save 0%
Save %
Power Whoop Connector plug - Male PWC (ph2) with 10cm wire
Save 0%
Save %
Description The PowerWhoop Connector is here! These connectors are far superior to the current standard (Micro JST) and are easy to solder on. The...
View full details
Save 0%
Save %
Save 0%
Save %
Save 0%
Save %
Spare Parts-X500 V2 Kit
Save 0%
Save %
Details The replacement QAV-SKITZO Dark Matter FPV Freestyle Quadcopter Arm Bottom Plate made of 3mm thick 3k carbon fiber. Specifications Weig...
View full details
Save 0%
Save %
Details The replacement QAV-SKITZO Quadcopter back rack made of 1mm thick 3k carbon fiber. Specifications Weight: 1g Thickness: 1mm Material:...
View full details
Save 0%
Save %
Details The replacement QAV-SKITZO Dark Matter FPV Freestyle Quadcopter Base Plate made of 3mm thick 3k carbon fiber. Specifications Weight: 1...
View full details
Save 0%
Save %
Details The replacement QAV-SKITZO Dark Matter FPV Freestyle Quadcopter Camera Sidewall made of 3mm thick 3k carbon fiber. Specifications Weigh...
View full details
Save 0%
Save %
Details The replacement QAV-SKITZO Dark Matter FPV Freestyle Quadcopter Horizontal Antenna Mount made of 3mm thick 3k carbon fiber. Specification...
View full details
Save 0%
Save %
Details The replacement QAV-SKITZO Dark Matter FPV Freestyle Quadcopter top plate made of 3mm thick 3k carbon fiber. Specifications Weight: 11 ...
View full details
Save 0%
Save %
Details The replacement QAV-SKITZO Dark Matter FPV Freestyle Quadcopter Vertical Antenna Mount made of 1mm G10 Composite. Specifications Weight...
View full details
Save 0%
Save %
Details The replacement flight camera plate for the QAV-R, QAV180 and QAV210 made of 3k carbon fiber. Compatibility QAV-R QAV180 QAV210 Specific...
View full details
Save 0%
Save %
Details One replacement side wall for the QAV-R, QAV180, and QAV210 made of 3k carbon fiber. Compatibility QAV-R QAV180 QAV210 Specifications ...
View full details