Discountable

TMotor bearings for F40/60 series motors Supplied 2 per bag to cover one motor.

New 3-bladed propellers from T-Motor with a 1.5mm shaft. SPECIFICATIONS Size : 3.1 Weight : 2.6g Pitch : 4.7 Hub thickness : 5.5mm Material : ...

Forged from stainless steel, carved with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimension...

Forged from stainless steel, carved with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimensions ...

Forged from stainless steel, with a diamond patterned grip and a hex tip made to last. The driver of choice in the TBS Workshop. Dimensions of the...

Manufactured by Team BlackSheep, this antenna is your cheap entry into circular polarization. The 5dbi gain provides enough beamwidth to comfortabl...

Sometimes you got that special project with special screws you dont have bits for.This 24bits kit might just be the lifesafer . Any workbench shoul...

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering exper...

TRUE DIVERSITY, FULL RANGE The TBS CROSSFIRE 8ch Diversity Receiver is a compact R/C receiver with 8ch PWM outputs (PPM, SBUS and CRSF capable), w...

THE EXTRA EXTENDED TBS IMMORTAL T V2 ANTENNA!With improved signal sensitivity and durability, the extended Immortal T antenna is the perfect compan...

This adapter board is designed to fit the Nano Diversity RX like a glove, hassle free and easy soldering. With this board you can enable connectivi...

WHY NANO?The Nano TX is designed to be installed in X-lite and X9D Lite radios with the "Lite" interface. Performance, functionalities, and even pr...

Introducing the Crossfire Stock TX V2 Antenna! We have listened to your complaints and made it extremely durable. In the process, we managed to im...

A pair of hand tuned antennas to be used with the TBS Crossfire 8ch diversity receiver. SMA connector.

A slightly-directional antenna for best signal penetration. Built ultra-durable using lessons learned from TBS Triumph, and designed by none other ...

Soldering flux is used before and during soldering to prevent oxidation and create better, cleaner solder joints. This flux type: NC-559-ASM-UV is ...

Never lose or mix up a micro SD card again! Stores up to 10 SD cards in a credit-card sized cradle FPV is all about getting that footage after a...

INSTALLATION Seperate the top and bottom board of your current Fusion module. (2 x 12pins connector) Install the upgraded board to the top board....

The perfect dressing for your salad, are you ready to take your FPV relationship to the next level?  SENSATION - LUBRICATING OIL (WHITE BOTTLE) Mad...

TBS Lucid 12S 90A ESCIntroducing a new standard in price and performance, the TBS Lucid 12S ESC powers your Cinelifters and Wings alike without bre...

The best micro race props available today! For brushed whoops. Just when you think TinyWhoop props are no longer evolving.....Check out these TBS x...

A linear antenna with MMCX connector.  SPECS Weight: 1.8grams Length: approximately 102mm (include shrink tube) Width: 1.79mm

TBS Smoke Stopper protects your spanking new builds from imminent disaster. Perform the first powerup with confidence! Avoid imminent disaster with...

Includes four (4) 7" spare arms for the SOURCE ONE HD carbon frame. Screws included.6mm Carbon Arms

Source One V5 5inch replacement arms. Includes 2 x 5" spare arms for the SOURCE ONE 5" carbon frame.  6mm Carbon Arms

Transform your Source One V5 into a long range cruiser in a deadcat configuration.  6mm thickness INCLUDES 2 x TBS Source One V5 7inch front arm...

TBS Source One V5.1 5inch The SOURCE ONE project is a first of its kind collaborative FPV frame project initiated by Team BlackSheep. It's a wide-s...

*IMPORTANT NOTEWe have discovered that XJT mini modules are using a pin that we did not anticipate for use in our module bay. It appears that the X...

Modification kit to make the TBS Tango2 compatible with SMA antennas.

Replacement V2 Gimbal for your Mambo or Tango 2 remote control. The new gimbal has been a development long in the making. Collecting all customer f...

Springs can age over time, or get lost during repairs. This set includes the orirignal tight tension springs which come with your TBS Tango 2, and ...

Tempered glass protector precisely cut for the Tango 2. Hassle free installation. The glass protector is made to fit the tango 2 screen window perf...

TBS TRACER NANO RX FEATURES: 250Hz: Fastest available radio and telemetry link! Next generation 2.4GHz technology meets robust Crossfire radio engi...

Set of 2 sleeve dipole receiver antennas for ultimate performance. Be sure to mount away from carbon fiber. For more challenging installations wher...

The next revolution in circular 5.8 GHz technology. Same noise and reflection rejection as the TBS Triumph. True circularity and great range. Insan...

TBS UNIFY PRO 5G8 HV 7-PIN VTX PIGTAIL.

Standard pigtail that comes with each TBS UNIFY PRO 5G8 HV.

A linear antenna with IPX / U.FL connector compatible with  the TBS UNIFY PRO 5G8 HV or U.FL connector compatible Video transmitters. In conjuncti...

A spare RPSMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.

A spare SMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.

A spare RPSMA pigtail for the TBS Unify PRO 5G8. A quick solder and you're good to go.

TBS Vendetta LED board. Programmable through Cleanflight. The power of the entire visible colour spectrum in your hands! INCLUDES 1x Spare LED Boa...

Check out these TBS x Tinywhoop Race Props, they are absolutely aweosme to fly with. Quad blades to ensure grippy cornering and the fat blades for ...

2 x CW 2 x CCW 1mm hole Brushless Micro prop30mm diameter