support@flyingrobot.co.za
support@flyingrobot.co.za
Sold out
(2CW+2CCW) - Poly Carbonate
Save 43%
Save %
Propeller Diameter: 5 inch Pitch : 2 Blades : 3Material : Poly Carbonate Weight :2.5gHub Diameter : 9.8mm Hub...
View full details
Save up to 27%
Save %
SPECIFICATION Propeller Diameter: 13inch Pitch: 12 Blades 3 Material: Carbon Reinforced Nylon Weight: 23.3g Hub Diameter: 22mm Hub Thickness: 12mm...
View full details
Save 17%
Save %
Flux2207 HQProp Flux 2207 Motor
Save 41%
Save %
Four Velcro straps with metal loop 16cm long 2cm wide
Save 27%
Save %
Description The DJI O3 Air Unit ND Filters Set includes ND8, ND16, and ND32. The filters are made of high-quality light-reduction materials, and ...
View full details
Save 42%
Save %
A pair of gloss white module doors for the ImmersionRC rapidFire Receiver. This version comes in gloss white to match many versions of Fat Shark go...
View full details
Save 20%
Save %
7" Arm set (4) Weight = 17.2g per arm 4mm carbon arms All Alien arm sizes are compatible with all Alien body kit sizes
Sold out
Press the button once to switch charging current. “Err” means battery polarity reverse. Charging time: In the first 60 seconds, charging time is m...
View full details
Sold out
A water-resistant coating designed for RC and electronics components. Easy to apply and durable. Kotking is designed to keep your electronics dr...
View full details
Save 51%
Save %
The Lumenier AXII DUO Patch Antenna (RHCP). A ultra-high gain, long range, circular polarized receiver antenna. Designed to provide long range 5.8G...
View full details
Sold out
Features & Specifications Receiving frequency: 9CH (1080MHz to 1360MHz) RX Sensitivity: -95dBm Band-pass filter 950MHz~1450MHz Dual input opti...
View full details
Sold out
SPECIFICATIONS: Drone Size: 65mm Flight Controller: BeeBrain BLV4 CRSF build in VTX and Crossfire Receiver Frame: Cockroach65 Brushless Frame (Sol...
View full details
Sold out
SPECIFICATION MCU: STM32F411 GYRO:BMI270 VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw) with BeeTX 5.8G...
View full details
Save 41%
Save %
OCDAY 4 in 1 Multi USB Charge HUB Battery Charger for DJI TELLO UAV The 4-in-1 battery charger is designed for Tello There are 4 interfaces in the ...
View full details
Sold out
• Longer Flight Time• 100% Balance • Higher Loaded Ability• Lightweight / High-strength
Save 58%
Save %
Spare parts for the QX90 Microquad frame. Included: 4 x Motor grommets 1 x Buzzer 1 x Power Cable 6 x Nylon standoffs 1 x Upper Board 1 x Pack of ...
View full details
Save 27%
Save %
Sold out
Save 32%
Save %
Shendrones 3.0 Thicc base, frame and 3d printed parts and landing gear
Sold out
Turn any Android smartphone into a portable FPV monitor with this handy 5.8GHz receiver! (Smartphone not included) Specifications Item Name: 5.8G...
View full details
Sold out
This is the SKYRC E3 Li-Po Charger, it takes 100-240V, good for any country in the world. There are no buttons on the charger, so simply wait the c...
View full details
Sold out
Sold out
The F40 PRO-IV continues the lineage of great FPV racing motors by T-Motor. The F40 PRO-IV is lighter and agile compared to its predecessor, 9% les...
View full details
Sold out
Save 20%
Save %
2 × MF2211 Polymer Carbon fibre propellers (1 CW and 1 CCW)
Sold out
The T-Motor P60A V2 is a powerful 3-6S 4-in-1 128K ESC with 128K PWM and BLHeli_32 firmware that supports Dshot2400. VIDEO: TMOTOR P60...
View full details
Save 36%
Save %
We took everything great about the grinder motors and made them better, thicker where it counts, stronger materials and a shiny gold top to show th...
View full details
Save 20%
Save %
SPECIFICATIONS Hub Size: 1mm Blades length: 30mm (across) Height: 7.44mm Motor Type: Brushed
Sold out
Pilots are unique in their own ways, mod your gear to match! Protect and look different, don’t let someone mistakenly take your TX by accident. Sp...
View full details
Save 19%
Save %
NEED PROTECTION? WE GOT IT! So it happens, TBS Triumphs have a hard knock life. Sick of losing Antennae from bumps and bruises? Protect your Signal...
View full detailsIncludes: 10x M3X6 Screws 5x 25mm Standoffs
Includes: 1x 2mm side plate
Sold out
RadioMaster - Gimbal LED Mod kit.This is the official RadioMaster gimbal LED mod set. No soldering required, easy plug and play install that will n...
View full details
Save 47%
Save %
SPECIFICATION Propeller Diameter: 4.8 inch Pitch : 3.6 Blades : 4 Material : Poly Carbonate Weight :4.05g Hub Diame...
View full details
Save 58%
Save %
The classic 1.3GHz Crosshair from VAS has received an update. The Crosshair was always known for its power and penetration, and the Crosshair XTREM...
View full details